Welcome to Tri-Tek Electronics

Copper to Fiber Media Converters

Copper to Fiber Media Converters
Tri-Tek Electronics features a selection of media converters designed to seamlessly bridge the gap between copper-based Ethernet equipment and fiber optic networks. These devices enable high-speed data transmission over fiber optic cables, enhancing network reach and reliability. Ideal for extending the connectivity range of gigabit networks, they offer a practical solution for environments where long-distance data transmission is essential. Explore our copper to fiber media converters to find robust and efficient converters for your networking needs.

11 products


  • Signamax 10/100/1000TX to 1000SX Media Converter - SC/MM, 2 km Range - FO-065-1196AED

    Signamax Signamax 10/100/1000TX to 1000SX Media Converter - SC/MM, 2 km Range - FO-065-1196AED

        Introducing the Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters, engineered for superior long-distance connections between traditional 10BaseT, 100BaseTX networks, and modern 1000Base Gigabit Ethernet networks. These converters feature an integrated switch that allows fiber cable connections to operate at 1000 Mbps, offering compatibility with 10BaseT, 100BaseTX, or 1000BaseT networks, while adhering to 1000BaseSX or 1000BaseLX standards for fiber optic connections. The fiber connection also supports full duplex mode regardless of the RJ-45 port's connection to a full duplex switch or a half duplex legacy hub.       Enhancements in this series include remarkably low latency, customizable settings for the RJ-45 port to operate in 100Base or 10Base full or half-duplex modes, auto-negotiation for the 1000Base fiber port, and the option for forced full-duplex mode. Additionally, these converters offer the flexibility to enable or disable the Link Fault Signaling feature. Features: Ultra-low latency suitable for extensive multi-hop networks. Exceptional reliability with an MTBF exceeding 112 years. Gigabit transmission capability with support for 9K bytes jumbo frames. IEEE 802.3x flow control compatibility for both full and half duplex. DIP switch configurations for link fault signaling, fiber auto/force mode, and SFP speed. Ensures full wire-speed forwarding rate. Versatile mounting options including wall, DIN-rail, and media converter rack mount chassis. Specifications: Standards Compliance: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control Ports: 1 RJ-45 10/100/1000BaseT/TX port. 1 1000BaseSX/LX fiber optic port. LED Status Indicators: For each Unit: Power, LFS Status, Full Duplex. For RJ-45 Port: Link Copper; Copper port speed indicators. For Fiber Port: Link Fiber. Performance: Latency under 1.5 μs (FIFO). MTBF estimated at 985,339.89 hours (112.48 years), per Part Stress Analysis Method. Throughput per port: 1,488,100 pps (64-byte packets) at 1000Base; 148,810 pps at 100Base. Switch Fabric Speed at 4.0 Gbps (non-blocking, wire speed performance). Frame Buffer of 12K total; supports Jumbo Frame of 9K packets. DIP Switch Settings: Customizable settings for Link Fault Signaling function and TX port modes. Fiber Interface: Laser Type: Laser Diode for P/N 065-1196AED. Detailed Wavelength, Power, and Sensitivity specifications for P/N 065-1196AED. Electrical Characteristics: 12 V DC power supply, external 100 – 240 V AC 50/60 Hz included. Environmental Requirements: Operating Temperature: 32°F to 122°F (0°C to 50°C). Storage Temperature: -14°F to 158°F (-10°C to 70°C). Relative Humidity: 5% to 95% (non-condensing). Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H. Weight: 0.33 lb (150 g). Certifications: CE, FCC, ROHS, VCCI Class A. Warranty: Limited Lifetime.

    $1,170.00 $780.00

  • High-Performance Signamax Media Converter 10/100 to 100FX, WDM SC/MM - FO-065-1176BLFSMM

    Signamax High-Performance Signamax Media Converter 10/100 to 100FX, WDM SC/MM - FO-065-1176BLFSMM

    The Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters are a groundbreaking solution in fiber optic technology. These converters efficiently utilize single fiber strands by employing two distinct light spectra, effectively allowing bidirectional communication. This innovative approach not only doubles the capacity of fiber optic networks but also significantly cuts down operational costs for businesses and carriers by reducing the need for additional fiber optic infrastructure. Available in both singlemode and multimode models, these converters can cover distances up to 40 kilometers (24.85 miles), making them ideal for extensive network systems. The essential aspect of these WDM Switching Media Converters is their A/B pairing requirement, ensuring reliable and continuous network performance. Integrated with Link Fault Signaling, they enable SNMP managed switches to detect fiber channel or twisted-pair connection failures, facilitating automatic rerouting through Spanning Tree Algorithm-equipped backup paths. Key Features: Enhances fiber optic network capacity; supports transmission and reception over a single fiber strand. Equipped with SC simplex connectors for reliable connectivity. User-friendly DIP switch configuration enables link fault signaling and fiber auto/force mode. Incorporates a built-in 10/100BaseT/TX Switch with store-and-forward architecture. Optional USB power for versatile powering solutions. Supports various mounting options: wall, DIN-rail, or media converter rack mount chassis. Specifications: Compliance with Standards: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX Ports: 1 RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port. 1 WDM fiber optic 100BaseFX port, span varies per part number. LED Status Indicators: Per Unit: Power Per RJ-45 Port: Link/Activity, Full Duplex/Collision; RJ-45 port speed Per Fiber Port: Link/Activity, Full Duplex/Collision Performance Metrics: Latency: < 4.2 μs (LIFO) Throughput per port: 148,809 pps (64-byte packets) at 100Base Speed: Varying rates for half/full duplex at 100BaseTX and 10BaseT MAC Address Capacity: 1K; Memory: 256 KB Fiber Interface Details: Type: MQW Laser for specific part numbers Wavelengths: Transmit and Receive wavelengths specified for P/N 065-1176BLFSMM Power: Output and Input power levels specified for part numbers Sensitivity and Link Power Budget for P/N 1176BLFSMM Electrical Characteristics: 12 V DC power supply, optional USB power connector. Environmental Requirements: Operating and Storage Temperatures Relative Humidity range Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H Weight: 0.33 lb (150 g) Certifications: CE, FCC, ROHS, VCCI Class A Warranty: Limited Lifetime

    $690.00 $460.00

  • Gigabit Ethernet to SFP Media Converter Gigabit Ethernet to SFP Media Converter

    Intellinet Gigabit Ethernet to SFP Media Converter

    2 in stock

    Intellinet 510493 Gigabit Ethernet to SFP Media Converter Chassis Tri-Tek Electronics is proud to offer the Intellinet 510493 Gigabit Ethernet to SFP Media Converter Chassis. This versatile and reliable media converter is designed to extend the reach of your network by converting Gigabit Ethernet signals to SFP (fiber optic) signals, ensuring seamless connectivity across various network environments. Product Features Converts Gigabit Ethernet to SFP (fiber optic) Compatible with a wide range of SFP modules Auto MDI/MDI-X support on RJ45 port Supports IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-SX/LX standards LED indicators for link/activity and power status Compact and lightweight design Plug and play installation External power adapter Specifications Connector 1: RJ45 (10/100/1000 Mbps) Connector 2: SFP slot (1.25 Gbps) Standards: IEEE 802.3ab (1000Base-T), IEEE 802.3z (1000Base-SX/LX) Data Transfer Rate: 1.25 Gbps LED Indicators: Power, Link/Activity Power Supply: External power adapter (5V DC, 2A) Dimensions: 95 x 71 x 26 mm (3.74 x 2.8 x 1.02 in.) Weight: 0.18 kg (0.4 lbs) Operating Temperature: 0 to 50°C (32 to 122°F) Storage Temperature: -20 to 70°C (-4 to 158°F) Certifications: FCC, CE, RoHS Installation Scenario Ideal for enterprise and industrial network environments, the Intellinet 510493 Gigabit Ethernet to SFP Media Converter Chassis extends your network's reach by converting copper Ethernet signals to fiber optic signals. This media converter is perfect for connecting remote switches, servers, and other network devices over long distances. Its plug and play installation ensures quick and easy setup without the need for extensive configuration. Why Choose Tri-Tek Electronics? As an authorized distributor of Intellinet products, Tri-Tek Electronics ensures that you receive full manufacturer warranty coverage, the best pricing, and exceptional factory support. Trust Tri-Tek Electronics for all your networking needs.

    2 in stock

    $58.99

  • High-performance 1000T to 1000LX Media Converter SC/SM, 10 km - Signamax FO-065-1197 | Reliable Fiber Optic Solutions

    Signamax High-performance 1000T to 1000LX Media Converter SC/SM, 10 km - Signamax FO-065-1197 | Reliable Fiber Optic Solutions

         The Signamax Gigabit Ethernet Media Converters are the ideal solution for extending distances over multimode or singlemode fiber in your network. With the option to use SFP modules, these converters offer maximum flexibility to adapt to changing network architectures. They can be easily installed into the Signamax Rack Mount Chassis system without any modification.      Designed to expand the scope of your Gigabit Ethernet network applications, these media converters are perfect for corporate data infrastructures and IP security networks.Features:Converts twisted-pair to fiber at gigabit speed.Supports IEEE 802.3z & 802.3ab standards.P/N 065-1195SFP supports SFP modules for flexible 1000Base fiber connection.Can be wall mounted, DIN-rail mounted, or used with media converter rack mount chassis.Comes with a lifetime warranty.Specifications:Applicable Standards: IEEE 802.3z 1000BaseSX, IEEE 802.3z 1000BaseLX.Ports: 1 RJ-45 1000BaseT port and 1 fiber optic 1000BaseSX/LX port (connectors and span may vary per P/N).LED Status Indicators: Power (per unit), Port A Link (SDA), Port B Link (SDB) (per fiber port).Performance: Latency ≤4.2 μs (FIFO), Throughput per port @ 1000Base: 1,488,100 pps (64-byte packets).Fiber Interface: Type - MQW Laser, Wavelength - 1300 nm nominal (1270 nm max., 1355 nm min.), Max Output Power - -3.0 dBm, Min Output Power - -11.0 dBm, Sensitivity - -22.0 dBm, Max Input Power - -3.0 dBm, Link Power Budget - 11.0 dB.Electrical Characteristics: 12 V DC, External AC power supply included (100 - 240 V AC, 50/60 Hz). Environmental Requirements: Operating Temperature - 32°F to 122°F (0°C to 50°C), Storage Temperature - -13°F to 158°F (-25°C to 70°C), Relative Humidity - 10% to 95% (non-condensing).Physical Characteristics: Dimensions - 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm), Weight - 0.33 lb (150 g).Certifications: CE, FCC, ROHS, VCCI Class A. Warranty: Limited Lifetime warranty.Upgrade your network infrastructure with the reliable and high-performance Signamax Gigabit Ethernet Media Converters. Get the flexibility you need to extend distances and enhance the capabilities of your network applications.

    $940.00 $626.67

  • Signamax 10/100/1000TX to 1000LX Media Converter - SC/SM, 20 km Range - FO-065-1196ALXED

    Signamax Signamax 10/100/1000TX to 1000LX Media Converter - SC/SM, 20 km Range - FO-065-1196ALXED

            Introducing the Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters, a sophisticated solution for bridging legacy 10BaseT and 100BaseTX networks with advanced 1000Base Gigabit Ethernet networks. These converters feature a smart built-in switch that allows fiber cable connections to operate at 1000 Mbps, compatible with 10BaseT, 100BaseTX, or a 1000BaseT network, while maintaining full compliance with 1000BaseSX or 1000BaseLX standards for the fiber optic connection. Additionally, they support full duplex mode for the fiber connection, irrespective of whether the RJ-45 port is linked to a full duplex switch or a half duplex legacy hub. Enhancements in this series include ultra-low latency, options to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, auto-negotiation on the 1000Base fiber port, forced full-duplex mode where necessary, and control over the Link Fault Signaling feature. Features: Ultra-low latency, ideal for large multi-hop networks. Exceptional reliability with an MTBF of over 112 years. Supports 9K bytes jumbo frames for Gigabit transmission. IEEE 802.3x flow control for full duplex and back pressure for half duplex. DIP switch configuration for link fault signaling, fiber auto/force mode, and SFP speed. Full wire-speed forwarding rate. Compatible with wall mounting, DIN-rail mounting, or media converter rack mount chassis. Specifications: Compliance with Standards: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control Ports: 1 RJ-45 10/100/1000BaseT/TX port. 1 1000BaseSX/LX fiber optic port. LED Status Indicators: Per Unit: Power, LFS Status, Full Duplex. Per RJ-45 Port: Link Copper; Copper port speed indicators. Per Fiber Port: Link Fiber. Performance: Latency: ≤1.5 μs (FIFO). MTBF: 985,339.89 hours (112.48 years), via Part Stress Analysis Method. Throughput per port: 1,488,100 pps (64-byte packets) at 1000Base; 148,810 pps at 100Base. Switch Fabric Speed: 4.0 Gbps (non-blocking, wire-speed performance). Frame Buffer: 12K total; Jumbo Frame Support for 9K packets. DIP Switch Settings: Various settings for LFS, Auto-Negotiation, and Force modes. Fiber Interface: Laser Type: MQW Laser for P/N 065-1196ALXED. Wavelength, Power, and Sensitivity details for P/N 065-1196ALXED. Electrical Characteristics: 12 V DC, External 100 – 240 V AC 50/60 Hz power supply. Environmental Requirements: Operating and Storage Temperatures. Relative Humidity: 5% to 95% (non-condensing). Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H. Weight: 0.33 lb (150 g). Certifications: CE, FCC, ROHS, VCCI Class A. Warranty: Limited Lifetime.

    $1,070.00 $713.33

  • High-Performance 10/100/1000TX to 1000SX Media Converter - Signamax FO-065-1196A

    Signamax High-Performance 10/100/1000TX to 1000SX Media Converter - Signamax FO-065-1196A

    The Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks. The built-in switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub. Improvements in the this series of media converters include: extremely low latency, the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required, and the enabling or disabling of the Link Fault Signaling feature. Features: Extremely low latency supports larger multi-hop networks Extremely high reliability; MTBF of over 112 years Gigabit transmission supports 9K bytes jumbo frames IEEE 802.3x flow control for full duplex and back pressure for half duplex supported DIP switch configuration for link fa High-Performance 10/100/1000TX to 1000SX Media Converter - Signamax FO-065-1196A Unlock seamless network connectivity with the Signamax FO-065-1196A, a versatile media converter designed to meet the demands of modern networking. This powerhouse device adheres to a range of industry standards, ensuring compatibility and reliability in your network infrastructure. Key Features: Ultimate Flexibility: Customize your network setup with features like ULT signaling, fiber auto/force mode, and SFP speed adjustment. Tailor your connection for optimal performance. Full Wire-Speed Forwarding: Experience uninterrupted data flow with a full wire-speed forwarding rate. Your data moves effortlessly, ensuring efficient communication. Multiple Mounting Options: Choose your preferred installation method. Wall mounting, DIN-rail mounting, or integration into a media converter rack mount chassis – the choice is yours. Specifications: Applicable Standards: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX IEEE 802.3z 1000BaseLX IEEE 802.3x Flow Control Ports: 1 RJ-45 10/100/1000BaseT/TX port 1 1000BaseSX or 1000BaseLX fiber optic port LED Status Indicators: Power, LFS Status, Full Duplex Link Copper Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps) Link Fiber Performance: Latency: ≤1.5 μs (FIFO) MTBF: 985,339.89 hours (112.48 years) Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets) Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance) Frame Buffer: 12K total Jumbo Frame Support: 9K packets supported DIP Switch Settings: Configure settings to match your requirements, including LFS, Auto-Negotiation, Force Mode, and more. Fiber Interface: Type: Laser Diode Wavelength: 850 nm nominal (830 nm max., 860 nm min.) Max Output Power: -4.0 dBm Min Output Power: -9.5 dBm Sensitivity: -13.5 dBm Max Input Power: -13.5 dBm Link Power Budget: 4.0 dB Electrical Characteristics: 12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included. Environmental Requirements: Operating Temperature: 32°F to 122°F (0°C to 50°C) Storage Temperature: -14°F to 158°F (-10°C to 70°C) Relative Humidity: 5% to 95% (non-condensing) Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm) Weight: 0.33 lb (150 g) Certifications: CE, FCC, ROHS, VCCI Class A Warranty: Limited Lifetime Warranty

    $516.00 $344.00

  • High-Quality 1000T to 1000SX Media Converter SC/MM - Signamax FO-065-1195 | Reliable Fiber Optic Solutions

    Signamax High-Quality 1000T to 1000SX Media Converter SC/MM - Signamax FO-065-1195 | Reliable Fiber Optic Solutions

         Intelligent and Flexible Signamax Gigabit Ethernet Media Converters | Reliable Fiber Optic Solutions Boost the reach of your network with Signamax Gigabit Ethernet Media Converters. Designed for both singlemode and multimode fiber, these converters offer exceptional flexibility and intelligence. With SFP module support for adaptable 1000Base fiber connections, seamless integration into Signamax Rack Mount Chassis system, and easy installation options like wall or DIN-rail mounting, these converters provide a versatile solution for expanding the scope of your Gigabit Ethernet network. Features: Converts twisted-pair to fiber at gigabit speed Supports IEEE 802.3z & 802.3ab standards P/N 065-1195SFP enables flexible 1000Base fiber connections Compatible with media converter rack mount chassis Lifetime warranty Specifications: Applicable Standards: IEEE 802.3z 1000BaseSX, IEEE 802.3z 1000BaseLX Ports: 1 RJ-45 1000BaseT port, 1 fiber optic 1000BaseSX/LX port LED Status Indicators: Power, Port A Link (SDA), Port B Link (SDB) Performance: Latency ≤4.2 μs, Throughput @ 1000Base: 1,488,100 pps (64-byte packets) Fiber Interface: Type - Laser Diode, Wavelength - 850 nm nominal, Max Output Power - -4.0 dBm, Min Output Power - -9.5 dBm, Sensitivity - -13.5 dBm, Max Input Power - -13.5 dBm, Link Power Budget - 4.0 dB Electrical Characteristics: 12 V DC, External 100 – 240 V AC 50/60 Hz (Power supply included) Environmental Requirements: Operating Temperature - 32°F to 122°F, Storage Temperature - -13°F to 158°F, Relative Humidity - 10% to 95% (non-condensing) Physical Characteristics: Dimensions - 4.33” L x 3.16” W x 0.91” H, Weight - 0.33 lb Certifications: CE, FCC, ROHS, VCCI Class A Warranty: Limited Lifetime Upgrade your network infrastructure and IP security networks with Signamax Gigabit Ethernet Media Converters. Trust in our reliable fiber optic solutions.

    $550.00 $366.67

  • Signamax 10/100 to 100FX Media Converter - WDM, SC/SM 20km, Tx:1550/Rx:1310 - FO-065-1176BLFS

    Signamax Signamax 10/100 to 100FX Media Converter - WDM, SC/SM 20km, Tx:1550/Rx:1310 - FO-065-1176BLFS

    Enhance your network's efficiency with the Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters. Designed to revolutionize data transmission, these converters enable data typically transmitted over two fiber optic strands to be sent through a single strand, using two distinct light spectra for simultaneous bidirectional signals. This cutting-edge technology effectively doubles your fiber optic network's capacity, offering significant operational cost savings for both carriers and enterprise businesses by reducing or postponing the need for additional fiber optic infrastructure. These versatile converters are available in singlemode and multimode models, capable of spanning up to 40 kilometers (24.85 miles). For optimal functionality, WDM Switching Media Converters should be utilized in A/B pairs. Each unit in this series comes equipped with Link Fault Signaling, empowering SNMP managed switches to detect failures in fiber channels or twisted-pair connections. This feature enables automatic rerouting to a backup path in switches equipped with Spanning Tree Algorithm, ensuring uninterrupted network performance. Features: Doubles fiber optic network capacity by transmitting and receiving over a single fiber strand. Equipped with an SC simplex connector for seamless connectivity. DIP switch configuration for enhanced link fault signaling and fiber auto/force mode. The built-in 10/100BaseT/TX Switch employs a store-and-forward architecture. USB power option for flexible powering solutions. Compatible with wall mounting, DIN-rail mounting, or media converter rack mount chassis. Specifications: Standards Compliance: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX Fixed Ports: 1 RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port. 1 WDM fiber optic 100BaseFX port, varying span per part number. LED Status Indicators: Per Unit: Power Per RJ-45 Port: Link/Activity, Full Duplex/Collision; RJ-45 port speed Per Fiber Port: Link/Activity, Full Duplex/Collision Performance: Latency: < 4.2 μs (LIFO) Throughput per port: 148,809 pps (64-byte packets) at 100Base Speed variations for half/full duplex at 100BaseTX and 10BaseT MAC Address Capacity: 1K; Memory: 256 KB Fiber Interface: Laser Type for specific part numbers Transmit and Receive Wavelengths detailed for P/N 065-1176BLFS Output and Input Power specifications for P/N 065-1176BLFS Sensitivity and Link Power Budget details for P/N 065-1176BLFS Electrical Characteristics: 12 V DC power supply, with an optional USB power connector. Environmental Requirements: Operating and Storage Temperature ranges Relative Humidity: 10% to 95% (non-condensing) Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H Weight: 0.33 lb (150 g) Certifications: CE, FCC, ROHS, VCCI Class A Warranty: Limited Lifetime

    $740.00 $493.33

  • Signamax 10/100 to 100FX WDM Media Converter, SC/MM, 2km - Tx:1310/Rx:1550 nm - FO-065-1176ALFSMM

    Signamax Signamax 10/100 to 100FX WDM Media Converter, SC/MM, 2km - Tx:1310/Rx:1550 nm - FO-065-1176ALFSMM

    Maximize your network's efficiency with the Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters. These innovative converters enable data transmission over a single strand of fiber optic cable, which traditionally requires two strands. By leveraging dual light spectra, they facilitate simultaneous bidirectional signal transmission. This groundbreaking technology effectively doubles your fiber optic network's capacity, offering considerable cost savings by reducing the need for additional fiber optic infrastructure. Available in both singlemode and multimode models, the Signamax converters can cover distances up to 40 kilometers (24.85 miles). For seamless operation, these WDM Switching Media Converters are designed to be used in A/B pairs. Each converter in this series is equipped with Link Fault Signaling, allowing SNMP managed switches to detect and respond to failures in fiber channels or twisted-pair connections. This feature ensures network resilience by enabling automatic rerouting to backup paths in switches equipped with the Spanning Tree Algorithm. Key Features: Doubles fiber optic network capacity through single-strand transmission. SC simplex connector for reliable connectivity. DIP switch configuration enhances link fault signaling and fiber auto/force mode. Built-in 10/100BaseT/TX Switch with store-and-forward architecture. USB power option for versatile powering. Supports wall, DIN-rail mounting, or use with media converter rack mount chassis. Specifications: Compliance with Standards: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX Fixed Ports: 1 RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port. 1 WDM fiber optic 100BaseFX port, span varies per part number. LED Status Indicators: Per Unit: Power Per RJ-45 Port: Link/Activity, Full Duplex/Collision; RJ-45 port speed Per Fiber Port: Link/Activity, Full Duplex/Collision Performance: Latency: < 4.2 μs (LIFO) Throughput per port: 148,809 pps (64-byte packets) at 100Base Speed variations for half/full duplex at 100BaseTX and 10BaseT MAC Address Capacity: 1K; Memory: 256 KB Fiber Interface Details: Laser Type: VCSEL (Tx), FP Laser (Rx) for P/N 065-1176ALFSMM Wavelengths: Transmit 850 nm, Receive 1310 nm for P/N 065-1176ALFSMM Power: Output and Input levels for P/N 065-1176ALFSMM Sensitivity and Link Power Budget for P/N 065-1176ALFSMM Electrical Characteristics: 12 V DC power supply, optional USB power connector. Environmental Requirements: Operating and Storage Temperatures Relative Humidity: 10% to 95% (non-condensing) Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H Weight: 0.33 lb (150 g) Certifications: CE, FCC, ROHS, VCCI Class A Warranty: Limited Lifetime

    $690.00 $460.00

  • Signamax 10/100 to 100FX Media Converter - WDM, SC/SM 20km, Tx:1310/Rx:1550 nm - FO-065-1176ALFS

    Signamax Signamax 10/100 to 100FX Media Converter - WDM, SC/SM 20km, Tx:1310/Rx:1550 nm - FO-065-1176ALFS

    "Discover the Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters, a transformative solution for fiber optic networks. These converters uniquely allow data transmission over a single strand of fiber optic cable, which typically requires two strands, by utilizing dual light spectra for simultaneous two-way signals. This state-of-the-art technology effectively doubles your network's fiber optic capacity, significantly reducing operational expenses for carriers and enterprise businesses by minimizing the need for additional fiber optic infrastructure. Offering versatility, these converters come in both singlemode and multimode models, capable of covering distances up to 40 kilometers (24.85 miles). They operate efficiently in A/B pairs and are integrated with Link Fault Signaling. This function enables SNMP managed switches to detect failures in fiber channels or twisted-pair connections, facilitating automatic rerouting to a backup path in switches equipped with the Spanning Tree Algorithm. Key Features: Increases fiber optic network capacity by facilitating transmission over a single fiber strand. Equipped with an SC simplex connector for optimal connectivity. DIP switch configuration supports link fault signaling and fiber auto/force mode. Features a built-in 10/100BaseT/TX Switch with store-and-forward architecture. USB power option available for flexible installation. Compatible with wall mounting, DIN-rail mounting, or media converter rack mount chassis. Specifications: Standards Compliance: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX Fixed Ports: 1 RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port. 1 WDM fiber optic 100BaseFX port, span varies per part number. LED Status Indicators: Per Unit: Power Per RJ-45 Port: Link/Activity, Full Duplex/Collision; RJ-45 port speed Per Fiber Port: Link/Activity, Full Duplex/Collision Performance Metrics: Latency: < 4.2 μs (LIFO) Throughput per port: 148,809 pps (64-byte packets) at 100Base Speed: 100BaseTX and 10BaseT, varying for half/full duplex MAC Address Capacity: 1K; Memory: 256 KB Fiber Interface: Laser Type: MQW Laser for P/N 065-1176ALFS Wavelengths: Transmit and Receive specifications for P/N 065-1176ALFS Output Power levels and Sensitivity for P/N 065-1176ALFS Electrical Characteristics: 12 V DC, External 100 – 240 V AC 50/60 Hz power supply. Optional USB power connector for versatile powering. Environmental Requirements: Operating and Storage Temperatures Relative Humidity: 10% to 95% (non-condensing) Physical Characteristics: Dimensions: 4.33” L x 3.16” W x 0.91” H Weight: 0.33 lb (150 g) Certifications: CE, FCC, ROHS, VCCI Class A Warranty: Limited Lifetime

    $720.00 $480.00

  • High-Performance 10/100TX to 100FX Media Converter SC/SM, 40 km - Signamax FO-065-1120ED

    Signamax High-Performance 10/100TX to 100FX Media Converter SC/SM, 40 km - Signamax FO-065-1120ED

    Enhance your network's reliability and performance with Signamax FO-065 Series 10/100 to 100FX Media Converters equipped with Link Fault Signaling. These converters provide SNMP managed switches the capability to detect failures in fiber channels or twisted-pair connections, enabling automatic routing to backup paths when using Spanning Tree Algorithm-equipped switches. This intelligent design enhances the functionality of managed switches and offers fail-safe solutions for complex network setups. The built-in 10/100 switch enables fiber cable connections to operate at 100 Mbps, compatible with both 10BaseT and 100BaseTX networks. It remains fully compliant with 100BaseFX standards. Whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, the fiber connection can operate in full duplex mode. The built-in switch also facilitates network segmentation, allowing for maximum fiber distance. Key Features: DIP switch configuration for link fault signaling, fiber auto/force mode, and SFP speed Built-in 10/100BaseT/TX Switch with store-and-forward architecture Supports wall mounting, DIN-rail mounting, or use with media converter rack mount chassis LED indicators for functions, links, and activity Limited lifetime warranty Specifications: APPLICABLE STANDARDS IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX PORTS 1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDIX port 1 – fiber optic 100BaseFX port with varying connectors and span per P/N LED STATUS INDICATORS Per Unit: Power Per RJ-45 Port: Link/Activity, Full Duplex/Collision (FDX/COL); RJ-45 port speed Per Fiber Port: Link/Activity, Full Duplex/Collision (FDX/COL) PERFORMANCE Latency: < 4.2 μs (LIFO) Throughput @ 100Base: 148,809 pps (64-byte packets) Speed: 100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20 Mbps for half/full duplex MAC Address Capacity: 1K; Memory: 256 KB FIBER INTERFACE Type: P/N 065-1120ED: MQW Laser Wavelength: P/N 065-1120ED: 1300 nm nominal (1261 nm max.,1360 nm min.) Max Output Power: P/N 065-1120ED: -5.0 dBm Min Output Power: P/N 065-1120ED: -12.0 dBm Sensitivity: P/N 065-1120ED: -35.0 dBm Max Input Power: P/N 065-1120ED: -5.0 dBm Link Power Budget: P/N 065-1120ED: 23.0 dB ELECTRICAL CHARACTERISTICS 12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included. PHYSICAL CHARACTERISTICS Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm) Weight: 0.33 lb (150 g) ENVIRONMENTAL REQUIREMENTS Operating Temperature: 32°F to 122°F (0°C to 50°C); Storage Temperature: -14°F to 158°F (-10°C to 70°C) Relative Humidity: 5% to 95% (non-condensing) CERTIFICATIONS CE, FCC, ROHS, VCCI Class A WARRANTY Limited Lifetime

    $650.00 $433.33

© 2024 Tri-Tek Electronics, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account