Welcome to Tri-Tek Electronics

Standard Modular Plugs

Standard Modular Plugs

16 products


  • Cat 6 Modular Plugs - No Bar 100/pkg.

    Vertical Cable Cat 6 Modular Plugs - No Bar 100/pkg.

    3 in stock

    Vertical Cable 012-022, Cat 6 Modular Plugs - No Bar 100/pkg.   Features : Category-6  RJ45 Plug for round solid and stranded Cable 50 Micro-Inch Gold Plated Contacts 3 Prong Can be used with CAT6 CMXF Max diameter 0.047″ (1.2mm) Max diameter cable jacket 0.224″ (5.70mm) 100 per bag  

    3 in stock

    $21.39 $19.69

  • RJ-11 Four Contact Plugs, QTY 100 6P4C For Flat Cable

    Pan Pacific RJ-11 Plugs, QTY 100 6P4C For Flat Cable

    2 in stock

    Pan Pacific PT-064, RJ-11 Four Contact Plugs, QTY 100 6P4C For Flat Cable    

    2 in stock

    $6.53 $4.57

  • Modular Plug RJ-11 PL 6 POS Solder ST Cable Mount 4 Terminal 1 Port

    Pan Pacific Modular Plug RJ-11 PL 6 POS Solder ST Cable Mount 4 Terminal 1 Port

    2 in stock

    Pan Pacific PT-064RS, Modular Plug RJ-11 PL 6 POS Solder ST Cable Mount 4 Terminal 1 Port Features & Benefits: RJ11 Modular Plugs for Round Cable (Pkg 100)      

    2 in stock

    $9.19 $6.43

  • Conn RJ-11 PL 6 POS Crimp ST Cable Mount 6 Terminal 1 Port

    Pan Pacific Conn RJ-11 PL 6 POS Crimp ST Cable Mount 6 Terminal 1 Port

    2 in stock

    Pan Pacific PT-066, Conn RJ-11 PL 6 POS Crimp ST Cable Mount 6 Terminal 1 Port  

    2 in stock

    $9.96 $6.97

  • 4P4C Modular Handset Plugs For Flat Cable, 100 Pcs

    Pan Pacific 4P4C Modular Handset Plugs For Flat Cable, 100 Pcs

    2 in stock

    Pan Pacific PT-044, Modular Plug 4P4C For Flat Cable, 100 Pcs  

    2 in stock

    $8.94 $6.26

  • CAT5e Modular Plug 8P8C 50u" UL Staggered 50/Bag

    Pan Pacific CAT5e Modular Plug 8P8C 50u" UL Staggered 50/Bag

    2 in stock

    Pan Pacific PT-05E88Q/50UL, CAT5e Modular Plug 8P8C 50u" UL Staggered 50/Bag  

    2 in stock

    $16.33 $11.43

  • Modular Plug 6P4C For Round Cable RJ11, 100/Bag

    Pan Pacific Modular Plug 6P4C For Round Cable RJ11, 100/Bag

    2 in stock

    Pan Pacific PT-064R, Modular Plug 6P4C For Round Cable RJ11, 100/Bag    

    2 in stock

    $8.16 $5.71

  • Modular Plug 8P8C RJ45 For Flat Cable 50pcs

    Pan Pacific Modular Plug 8P8C RJ45 For Flat Cable 50pcs

    1 in stock

    Pan Pacific PT-088, Modular Plug 8P8C RJ45 For Flat Cable 50pcs    

    1 in stock

    $7.55 $5.29

  • 8P8C RJ45 Modular Plugs For Round Stranded Cat 5e/6 UTP - 50/pkg.

    Pan Pacific 8P8C RJ45 Modular Plugs For Round Stranded Cat 5e/6 UTP - 50/pkg.

    2 in stock

    Pan Pacific PT-088R, Modular Plug 8P8C For Round 2 Prong RJ45 CAT5/6 Connector For Stranded Twisted Pair Cable    

    2 in stock

    $7.96 $5.57

  • 8P8C RJ45 Modular Plugs For Solid UTP Wire - 50/pkg.

    Pan Pacific 8P8C RJ45 Modular Plugs For Solid UTP Wire - 50/pkg.

    7 in stock

    Pan Pacific PT-088RS, Modular Plug 8P8C RJ45 For Solid Wire

    7 in stock

    $9.19 $6.43

  • Shielded Cat 6 / 6A Modular Plugs, Bag of 100 pcs. Shielded Cat 6 / 6A Modular Plugs, Bag of 100 pcs.

    Vertical Cable Shielded Cat‑6/6A RJ45 Modular Plugs (with Loading Bar, Bag of 100)

    1 in stock

    Vertical Cable 012‑021‑100 Shielded Cat‑6/6A RJ45 Modular Plugs (with Loading Bar, Bag of 100) Tri‑Tek Electronics is an authorized distributor of Vertical Cable products and ensures full manufacturer warranty, best pricing, and factory support. We also serve the Phoenix, AZ area (Mesa, Chandler, Tempe, Gilbert, Scottsdale) from our Mesa, AZ retail location. Product Overview The Vertical Cable 012‑021‑100 modular plug is a shielded RJ45 plug designed for use with Cat‑6 and Cat‑6A cabling systems. The “‑100” suffix indicates a bulk packaging of 100 pieces, making it ideal for installers, network technicians, and structured cabling projects. The plugs include a loading bar to simplify wire alignment and reduce termination errors. Key Features & Benefits Shielded / STP Design – Provides protection against electromagnetic interference (EMI) and crosstalk in noisy environments 50 micro‑inches Gold-Plated Contacts – Ensures low contact resistance, durability, and reliable signal integrity over repeated mating cycles 3-Prong Contact Design – Enhances signal contact reliability and ensures consistent termination For 23 AWG (Solid) or Stranded Cable – Optimized for 23 AWG conductors, but supports stranded cable types as well Maximum Insulation Diameter Compatibility – Supports insulating thickness up to 1.5 mm Housing Material – Polycarbonate, transparent, meeting UL94V-2 flammability standards Mechanical & Electrical Specs:  • Insulation Resistance: 100 MΩ  • Termination Resistance (after environmental testing): ≤ 20 mΩ  • Cable‑to‑plug tensile strength: 20 lbs  • Durability (mating cycles): 200 cycles  • Acceptable conductor insulation diameter: 0.045″–0.057″ (≈ 1.15–1.45 mm)  • Maximum outer diameter (cable + jacket): 0.314″ (≈ 8 mm) Applications & Use Cases This plug is well suited for: Field terminations in Cat‑6A or Cat‑6 infrastructure, especially in shielded systems (e.g. F/UTP, SF/UTP) Enterprise network deployments where EMI shielding is required (e.g. in data centers, industrial facilities, near electrical noise sources) Replacement or repair of existing shielded network cabling Installers wiring bulk runs (e.g. large jobs) — the 100‑piece bag helps lower per‑unit cost Installation / Termination Guidance Cable Preparation  • Strip back approximately 1″ (25 mm) of jacket to expose the twisted pairs  • Untwist pairs and arrange per TIA/EIA 568A or 568B wiring standard Use the Loading Bar  • Insert wires into the provided load bar to align conductors precisely and maintain consistent depth  • Position the load bar close to the outer jacket and trim any excess conductor to about ¼″ (6 mm) beyond the bar Insert into Plug and Crimp  • Insert the loaded bar + wires into the plug housing until they seat fully  • Use a proper shielded RJ45 crimp tool to crimp contacts and fold down the cable shield retention tab Ground / Shield Connection  • Ensure the cable shield’s drain wire or foil is properly terminated to the plug’s ground tab Verify and Test  • Use a cable tester to verify all conductor pairs are properly connected and there are no shorts or opens Example Usage Scenario Imagine an enterprise building in Mesa, AZ installing a shielded backbone to support high bandwidth applications. The network technician runs shielded Cat‑6A cabling through conduit near heavy machinery and HVAC equipment (which can introduce EMI). At the far end, she terminates each cable with the Vertical Cable 012‑021‑100 shielded RJ45 plug. Because the plugs include a loading bar and are optimized for 23 AWG conductors, she can terminate multiple runs quickly and reliably. Post‑termination tests show all links pass category 6A performance, with minimal insertion loss thanks to the high‑quality 50 micro‑inch gold contacts. In this scenario, using unshielded plugs would invite potential crosstalk or external interference, so the shielded plug is essential for maintaining network integrity in electrically noisy environments. Why Buy from Tri‑Tek Electronics (Mesa, AZ)? We are an authorized distributor of Vertical Cable, guaranteeing genuine product and full manufacturer warranty support Local presence in Mesa, AZ means faster shipping, easier support, and on‑site consultation for customers in Phoenix and surrounding metro areas Our pricing is competitive for contractors, integrators, and network professionals We can bundle this plug with matching crimp tools and cable accessories for complete termination kits Summary Table Feature Specification / Value Model 012‑021‑100 Plug Type Shielded (STP) RJ45, 8P8C Compatible Cable Type Cat‑6 / Cat‑6A, solid or stranded (23 AWG preferred) Gold‑Plated Contact Thickness 50 micro‑inches Insulation Diameter Supported Up to 1.5 mm Outer Cable Diameter Up to 0.314″ (≈ 8 mm) Mechanical Strength 20 lb tensile, 200 mating cycles Electrical Performance ≤ 20 mΩ termination resistance, 100 MΩ insulation Package 100 plugs per bag

    1 in stock

    $59.00 $43.69

  • RJ45 CAT6A 10Gig Shielded Connector with Liner, Solid 3-Prong RJ45 CAT6A 10Gig Shielded Connector with Liner, Solid 3-Prong

    Platinum Tools RJ45 CAT6A 10Gig Shielded Connector with Liner, Solid 3-Prong

    Pre-order Now

    RJ45 CAT6A 10Gig Shielded Connector with Liner, Solid 3-Prong, Bag of 25 pcs. Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements. Product Features Max cable OD: 8.5mm/0.335" Max conductor OD: 1.35mm/0.053" Individual conductor OD range: 0.042” - 0.053” (1.07mm-1.35mm) Wire gauge range (AWG) 24—22 Designed for both shielded and unshielded cabling 50µ Gold Contacts UL and RoHS compliant

    Pre-order Now

    $48.38 $41.12

© 2025 Tri-Tek Electronics, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account