Desoldering Tools and Supplies

Eclipse Tools SS-989E 2 IN 1 SMD Hot Air Rework Station Tri-Tek Electronics is an authorized distributor of Eclipse Tools products, ensuring full manufacturer warranty coverage and best pricing and factory support. Product Overview The Eclipse Tools SS-989E 2 IN 1 SMD Hot Air Rework Station is a high-performance tool designed for precise and efficient reworking of surface mount devices (SMD). It features accurate temperature control, a microprocessor-controlled system, and a closed circuit sensor design, making it suitable for professional and DIY electronics repair and assembly. Features and Specifications Accurate Temperature Control: Ensures precise reworking of components. Microprocessor Controlled: Offers reliable and stable temperature control. Temperature Calibration Function: Allows for easy adjustments and calibration. Certified Safety Standards: Complies with CE, ESD, and RoHS standards. High-Quality Components: AWG 20 (0.5mm²) UL Certified Wires Silicone handpiece cord wire heat-resistant up to 200°C High Power and Fast Warm-Up: Alumina Ceramic Soldering Iron Heating Element for quick heat-up. Metal Heating Core for the hot air gun. Energy Saving: Individual function starts save energy, or share function by two users simultaneously. Adjustable Settings: Customizable temperature and air flow for various components like QFP, SOP type IC devices. Interchangeable Parts: Compatible with most branded hot air nozzles and tips. Auto Cool-Off Process: Prolongs the service life by keeping the blower on until the nozzle cools down. Specifications Model: SS-989E Power Consumption: 700W Soldering Power: 60W Soldering Iron Temperature Range: 200°C ~ 480°C (392°F ~ 896°F) Hot Air Temperature Range: Room temperature ~ 480°C (896°F) Soldering Iron Heating Element: Alumina Ceramic Hot Air Heating Element: Metal Heating Core Pump/Motor Type: Diaphragm Pump Air Capacity: 24L/min (max) Equipment Noise: 45dB Temperature Display: LED Power Input: AC 110V~120V 60Hz Dimensions: 10(L) x 7.5(W) x 5.5(H) in. Weight: 9.25 lbs (with hot air gun) Accessories Included Hot Air Gun: AC110~120V x 1pcs (9SS-900NE-HG) Soldering Iron: AC 24V/60W x 1pcs (9SS-900N-SI) Soldering Stand: x 1pcs Nozzles: Nozzle 9SS-900-A1 (∅2.2mm) x 1pcs Nozzle 9SS-900-A2 (∅6.6mm) x 1pcs Nozzle 9SS-900-A3 (∅8.5mm) x 1pcs Example Use Scenario The SS-989E is ideal for reworking QFP and SOP type IC devices. For example, it can be used to remove and replace faulty ICs on a printed circuit board (PCB) in a professional electronics repair shop. The adjustable temperature and air flow ensure that components are reworked without damage, and the auto cool-off feature prolongs the tool's lifespan. Why Choose the Eclipse Tools SS-989E 2 IN 1 SMD Hot Air Rework Station? Accurate and Reliable: Provides precise temperature control for professional results. High-Quality Construction: Built to last with certified safety standards. Versatile Use: Suitable for a wide range of SMD reworking tasks. Energy Efficient: Save energy with individual or shared function starts. Comprehensive Kit: Includes all necessary accessories for immediate use.

Read more less

Eclipse Tools SS-969E SMD Hot Air Solder Rework Station Product Overview The Eclipse Tools SS-969E SMD Hot Air Solder Rework Station is a professional-grade tool designed for the precise repair and rework of surface-mount devices (SMDs). Ideal for electronics technicians, engineers, and hobbyists, this station offers a reliable solution for desoldering and reflowing components on circuit boards, making it an essential tool for modern electronics work. The SS-969E features a high-performance hot air gun with adjustable temperature and airflow settings, allowing for precise control during delicate operations. This rework station is engineered to meet the demands of high-quality soldering and desoldering tasks, ensuring efficiency and safety in various applications. Tri-Tek Electronics, an authorized distributor of Eclipse Tools, guarantees full manufacturer warranty coverage, the best pricing, and factory support, making this product a trusted choice for professionals. Key Features Adjustable Temperature Range: 100°C to 480°C (212°F to 896°F), providing flexibility for various soldering tasks. Adjustable Airflow: 1 to 120 liters per minute, ensuring optimal control for different component sizes. Digital Display: Easy-to-read digital screen for precise temperature and airflow adjustments. Rapid Heating: The station heats up quickly, reducing downtime and improving productivity. Auto Cool Down Function: Automatically cools the heating element to extend the tool's lifespan. ESD Safe Design: Protects sensitive components from electrostatic discharge. Lightweight and Ergonomic Hot Air Gun: Designed for comfort during prolonged use. Multiple Nozzles Included: Comes with a variety of nozzles to accommodate different SMD components. Installation Scenario A technician performing a rework on a densely populated PCB (Printed Circuit Board) can rely on the Eclipse SS-969E to safely remove and replace tiny SMD components without damaging adjacent parts. The adjustable temperature and airflow settings allow for precision in handling components like QFPs, PLCCs, and BGAs, making it an indispensable tool for complex rework tasks. Applications Surface-Mount Device (SMD) Rework: Ideal for removing and reflowing SMD components on PCBs. Desoldering: Efficiently removes solder from component leads and pads. Heat Shrinking: Perfect for shrinking heat shrink tubing in electronics projects. Conformal Coating Removal: Can be used to remove coatings without damaging the underlying components. Specifications Model: SS-969E Temperature Range: 100°C to 480°C (212°F to 896°F) Airflow Rate: 1-120 L/min Display: Digital temperature and airflow display Power Consumption: 270W Weight: 1.5 kg (3.3 lbs) Included Accessories: Various nozzles for different component sizes ESD Safe: Yes Why Choose Tri-Tek Electronics? Tri-Tek Electronics, based in Mesa, AZ, is your trusted source for the Eclipse Tools SS-969E SMD Hot Air Solder Rework Station. As an authorized distributor, we ensure that you receive full manufacturer warranty coverage, the best pricing, and dedicated factory support. Whether you're a professional technician or an electronics hobbyist, Tri-Tek Electronics is committed to providing high-quality products and exceptional customer service.

Read more less

Eclipse Enterprises 900-004, Anti-Static Mini-Tip Metal Desoldering Pump with Replaceable Tip   Metal Body Construction Dual Spring Loaded Piston Single Hand Operation 30 Cm-Hg Suction Self-Cleaning, Non-Clogging Tip Replaceable Anti-Static Tip (900-008)  

Read more less

Eclipse DP-366J, Desoldering Pump ( See-Through Barrel)   Product Features: Desoldering pump with high vacuum force for circuit boards High suction power Piston with double O-rings avoids the air leakage and maximizes suction power Suction capability: 32cm-Hg, quick and easy to clean solder residues Easy clearance Transparent tube is easy to check the volume of solder residues Replacement tip with heat-resistant Teflon User-oriented design Nonslip handle design to hold the pump tightly Compact size for one hand operation Ideal desoldering tool to rework or repair circuit boards

Read more less

Eclipse DP-366P, Desoldering Pump   Big Blue Desoldering Pump with High Suction Force and Exposed Plunger Product Features: Big blue desoldering pump Larger design High suction force Exposed plunger  

Read more less

MG Chemicals MG424 5 Ft. SUPERWICK - #2 Yellow Non-Static 0.05" Diameter The MG Chemicals MG424 SUPERWICK is a high-performance desoldering braid designed for efficient and precise removal of solder. This 5-foot, #2 yellow braid features a 0.05-inch diameter and is non-static, making it ideal for use in sensitive electronic environments. The SUPERWICK braid is perfect for rework and repair tasks, providing reliable and clean desoldering with minimal residue. Features High Efficiency: Excellent wicking action for quick and effective solder removal. Non-Static: Safe for use with sensitive electronic components. Precise Diameter: 0.05-inch diameter suitable for a wide range of applications. Color-Coded: #2 yellow braid for easy identification. Length: 5 feet, providing ample material for multiple uses. Specifications Length: 5 feet Color: Yellow (#2) Diameter: 0.05 inches (1.27 mm) Material: Copper braid Flux: Rosin Non-Static: Yes Example Use Scenario The MG Chemicals MG424 SUPERWICK is ideal for repairing a PCB where excess solder needs to be removed from solder joints. For instance, when replacing a damaged component, the SUPERWICK effectively removes the old solder, allowing for a clean and precise installation of the new component. This braid is particularly useful in applications where sensitive electronic components are involved, ensuring that no static electricity is introduced during the desoldering process. How to Use MG Chemicals MG424 SUPERWICK Preparation: Ensure the work area is clean and well-lit. Secure the PCB or component to prevent movement during the desoldering process. Application: Select the appropriate size of SUPERWICK for the job. Place the end of the braid over the solder joint to be desoldered. Heating: Heat your soldering iron to the appropriate temperature. Place the soldering iron tip on top of the braid, directly over the solder joint. Allow the heat to transfer through the braid to the solder, which will then be wicked up into the braid. Removal: Once the solder has been absorbed, remove the braid and soldering iron from the joint. Cut off and discard the used section of the braid. Cleaning: Inspect the area to ensure all solder has been removed. If necessary, repeat the process with a fresh section of braid until the joint is clean. Additional Information Tri-Tek Electronics is an authorized distributor of MG Chemicals products, ensuring you receive full manufacturer warranty coverage and the best pricing and factory support.

Read more less

MG Chemicals MG442 25 Ft. SUPERWICK - #2 Yellow Non-Static 0.05" Diameter The MG Chemicals MG442 SUPERWICK is a high-performance desoldering braid designed for efficient and precise removal of solder. This 25-foot, #2 yellow braid features a 0.05-inch diameter and is non-static, making it ideal for use in sensitive electronic environments. The SUPERWICK braid is perfect for rework and repair tasks, providing reliable and clean desoldering with minimal residue. Features High Efficiency: Excellent wicking action for quick and effective solder removal. Non-Static: Safe for use with sensitive electronic components. Precise Diameter: 0.05-inch diameter suitable for a wide range of applications. Color-Coded: #2 yellow braid for easy identification. Length: 25 feet, providing ample material for multiple uses. Specifications Length: 25 feet Color: Yellow (#2) Diameter: 0.05 inches (1.27 mm) Material: Copper braid Flux: Rosin Non-Static: Yes Example Use Scenario The MG Chemicals MG424 SUPERWICK is ideal for repairing a PCB where excess solder needs to be removed from solder joints. For instance, when replacing a damaged component, the SUPERWICK effectively removes the old solder, allowing for a clean and precise installation of the new component. This braid is particularly useful in applications where sensitive electronic components are involved, ensuring that no static electricity is introduced during the desoldering process. How to Use MG Chemicals MG442 SUPERWICK Preparation: Ensure the work area is clean and well-lit. Secure the PCB or component to prevent movement during the desoldering process. Application: Select the appropriate size of SUPERWICK for the job. Place the end of the braid over the solder joint to be desoldered. Heating: Heat your soldering iron to the appropriate temperature. Place the soldering iron tip on top of the braid, directly over the solder joint. Allow the heat to transfer through the braid to the solder, which will then be wicked up into the braid. Removal: Once the solder has been absorbed, remove the braid and soldering iron from the joint. Cut off and discard the used section of the braid. Cleaning: Inspect the area to ensure all solder has been removed. If necessary, repeat the process with a fresh section of braid until the joint is clean. Additional Information Tri-Tek Electronics is an authorized distributor of MG Chemicals products, ensuring you receive full manufacturer warranty coverage and the best pricing and factory support.

Read more less

MG Chemicals 427 SUPERWICK #5 Brown Non-Static Solder Wick 0.125" Diameter 5ft. The MG Chemicals 427 SUPERWICK #5 Brown Non-Static Solder Wick is designed for efficient and precise removal of solder in electronic repair and rework tasks. This 5-foot desoldering braid features a 0.125-inch diameter and is non-static, making it safe and ideal for use with sensitive electronic components. Features High Efficiency: Excellent wicking action for quick and effective solder removal. Non-Static: Safe for use with sensitive electronic components. Precise Diameter: 0.125-inch diameter suitable for a wide range of applications. Color-Coded: #5 brown braid for easy identification. Length: 5 feet, providing ample material for multiple uses. Specifications Length: 5 feet Color: Brown (#5) Diameter: 0.125 inches (3.2 mm) Material: Copper braid Flux: Rosin Non-Static: Yes Example Use Scenario The MG Chemicals 427 SUPERWICK is ideal for desoldering larger components from PCBs. For instance, when replacing a large through-hole component such as a power transistor, the SUPERWICK effectively removes the excess solder, allowing for clean and precise installation of the new component. This braid is particularly useful in applications involving sensitive electronic components, ensuring that no static electricity is introduced during the desoldering process. How to Use MG Chemicals 427 SUPERWICK Preparation: Ensure the work area is clean and well-lit. Secure the PCB or component to prevent movement during the desoldering process. Application: Select the appropriate size of SUPERWICK for the job. Place the end of the braid over the solder joint to be desoldered. Heating: Heat your soldering iron to the appropriate temperature. Place the soldering iron tip on top of the braid, directly over the solder joint. Allow the heat to transfer through the braid to the solder, which will then be wicked up into the braid. Removal: Once the solder has been absorbed, remove the braid and soldering iron from the joint. Cut off and discard the used section of the braid. Cleaning: Inspect the area to ensure all solder has been removed. If necessary, repeat the process with a fresh section of braid until the joint is clean. Additional Information Tri-Tek Electronics is an authorized distributor of MG Chemicals products, ensuring you receive full manufacturer warranty coverage and the best pricing and factory support.

Read more less

MG Chemicals 444 SUPERWICK #4 Blue Non-Static Solder Wick 0.10" Diameter 25ft. The MG Chemicals 444 SUPERWICK #4 Blue Non-Static Solder Wick is designed for efficient and precise removal of solder in electronic repair and rework tasks. This 25-foot desoldering braid features a 0.10-inch diameter and is non-static, making it safe and ideal for use with sensitive electronic components. Features High Efficiency: Excellent wicking action for quick and effective solder removal. Non-Static: Safe for use with sensitive electronic components. Precise Diameter: 0.10-inch diameter suitable for a wide range of applications. Color-Coded: #4 blue braid for easy identification. Length: 25 feet, providing ample material for extensive use. Specifications Length: 25 feet Color: Blue (#4) Diameter: 0.10 inches (2.54 mm) Material: Copper braid Flux: Rosin Non-Static: Yes Example Use Scenario The MG Chemicals 444 SUPERWICK is ideal for desoldering components from PCBs, such as removing a faulty multi-pin IC from a motherboard. By using the SUPERWICK, technicians can efficiently wick away the solder, allowing for clean and precise component removal. This braid is particularly useful in applications involving sensitive electronic components, ensuring no static electricity is introduced during the desoldering process. How to Use MG Chemicals 444 SUPERWICK Preparation: Ensure the work area is clean and well-lit. Secure the PCB or component to prevent movement during the desoldering process. Application: Select the appropriate size of SUPERWICK for the job. Place the end of the braid over the solder joint to be desoldered. Heating: Heat your soldering iron to the appropriate temperature. Place the soldering iron tip on top of the braid, directly over the solder joint. Allow the heat to transfer through the braid to the solder, which will then be wicked up into the braid. Removal: Once the solder has been absorbed, remove the braid and soldering iron from the joint. Cut off and discard the used section of the braid. Cleaning: Inspect the area to ensure all solder has been removed. If necessary, repeat the process with a fresh section of braid until the joint is clean. Additional Information Tri-Tek Electronics is an authorized distributor of MG Chemicals products, ensuring you receive full manufacturer warranty coverage and the best pricing and factory support.

Read more less