Welcome to Tri-Tek Electronics

Project Boxes

10 products


  • Philmore Mfg. Philmore Mfg PB120

    2 in stock

    6-1/4 x 3-3/4 x 2-1/8 Black Project Box

    2 in stock

    $5.39

  • Hammond Mfg. Hammond Mfg 1590C

    2 in stock

    Diecast AU Box 4.7 x 3.7 x 2.06

    2 in stock

    $18.08 $13.29

  • Tapered Square Rubber Foot or Bumper 12 Pack

    Philmore Mfg. Tapered Square Rubber Foot or Bumper 12 Pack

    2 in stock

    Philmore 10-610, Tapered Square Rubber Foot or Bumper 12 Pack For use on chassis boxes and equipment cabinets. Rubber feet/bumpers are self-adhesive and supplied on a backing sheet. Application simply requires peeling individual foot from the backing and sticking it to your cabinet or chassis box. Soft rubber but will not leave marks on hard surfaces. Soft but firm, these items make good bumpers, feet for chassis boxes and spacers for PC boards. All are black in color and about 70 durometer hardness.   Self adhesive and will stick well to a chassis box. Semi-soft rubber does not normally leave marks. Diameter at base: .50" Height: .237"  

    2 in stock

    $2.19

  • Philmore Mfg. Philmore Mfg PB180

    2 in stock

    PROJECT BOX

    2 in stock

    $4.19

  • Philmore Mfg. Philmore Mfg PB190

    1 in stock

    5-3/4 x 3-5/16 x 2.0 Gray Project Box

    1 in stock

    $7.19

  • Diecast Aluminum Enclosure

    Hammond Mfg. Diecast Aluminum Enclosure

    1 in stock

    Hammond Mfg. 1590B Diecast AU Box 4.37" x 2.37" x 1.22" Features: Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Unpainted version is vibra finished for a smooth surface with no sharp edges. Includes screws threaded into factory-tapped holes.  Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

    1 in stock

    $11.28 $8.29

  • Tapered Cylinder Rubber Foot or Bumper 12 Pack

    Philmore Mfg. Tapered Cylinder Rubber Foot or Bumper 12 Pack

    1 in stock

    Philmore 10-602, Tapered Cylinder Rubber Foot or Bumper 12 Pack For use on chassis boxes and equipment cabinets. Rubber feet/bumpers are self-adhesive and supplied on a backing sheet. Application simply requires peeling individual foot from the backing and sticking it to your cabinet or chassis box. Soft rubber but will not leave marks on hard surfaces. Soft but firm, these items make good bumpers, feet for chassis boxes and spacers for PC boards. All are black in color and about 70 durometer hardness.   Shaped like a tapered cylinder, self adhesive and will stick well to a chassis box. May be used with a no. 8 wood screw or machine screw, if necessary. Semi-soft rubber does not normal leave marks. Diameter at base: .870" Height: .40"  

    1 in stock

    $4.39

  • Philmore Mfg. Philmore Mfg PB520

    2 in stock

    PROJECT BOX

    2 in stock

    $7.29

  • Hammond Mfg. Hammond Mfg 1590A

    2 in stock

    Diecast AU Box 3.63 x 1.52 x 1.07

    2 in stock

    $10.54 $7.79

  • Philmore Mfg. Philmore Mfg PB100

    2 in stock

    PROJECT BOX

    2 in stock

    $3.89

© 2024 Tri-Tek Electronics, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account