Welcome to Tri-Tek Electronics

Signamax 10/100 to 100FX WDM Media Converter, SC/MM, 2km - Tx:1310/Rx:1550 nm - FO-065-1176ALFSMM

Maximize your network's efficiency with the Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters. These innovative converters enable data transmission over a single strand of fiber optic cable, which traditionally requires two strands. By leveraging dual light spectra, they facilitate simultaneous bidirectional signal transmission. This groundbreaking technology effectively doubles your fiber optic network's capacity, offering considerable cost savings by reducing the need for additional fiber optic infrastructure.

Available in both singlemode and multimode models, the Signamax converters can cover distances up to 40 kilometers (24.85 miles). For seamless operation, these WDM Switching Media Converters are designed to be used in A/B pairs. Each converter in this series is equipped with Link Fault Signaling, allowing SNMP managed switches to detect and respond to failures in fiber channels or twisted-pair connections. This feature ensures network resilience by enabling automatic rerouting to backup paths in switches equipped with the Spanning Tree Algorithm.

Key Features:

  • Doubles fiber optic network capacity through single-strand transmission.
  • SC simplex connector for reliable connectivity.
  • DIP switch configuration enhances link fault signaling and fiber auto/force mode.
  • Built-in 10/100BaseT/TX Switch with store-and-forward architecture.
  • USB power option for versatile powering.
  • Supports wall, DIN-rail mounting, or use with media converter rack mount chassis.

Specifications:

Compliance with Standards:

  • IEEE 802.3 10BaseT
  • IEEE 802.3u 100BaseTX
  • IEEE 802.3u 100BaseFX

Fixed Ports:

  • 1 RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port.
  • 1 WDM fiber optic 100BaseFX port, span varies per part number.

LED Status Indicators:

  • Per Unit: Power
  • Per RJ-45 Port: Link/Activity, Full Duplex/Collision; RJ-45 port speed
  • Per Fiber Port: Link/Activity, Full Duplex/Collision

Performance:

  • Latency: < 4.2 μs (LIFO)
  • Throughput per port: 148,809 pps (64-byte packets) at 100Base
  • Speed variations for half/full duplex at 100BaseTX and 10BaseT
  • MAC Address Capacity: 1K; Memory: 256 KB

Fiber Interface Details:

  • Laser Type: VCSEL (Tx), FP Laser (Rx) for P/N 065-1176ALFSMM
  • Wavelengths: Transmit 850 nm, Receive 1310 nm for P/N 065-1176ALFSMM
  • Power: Output and Input levels for P/N 065-1176ALFSMM
  • Sensitivity and Link Power Budget for P/N 065-1176ALFSMM

Electrical Characteristics:

  • 12 V DC power supply, optional USB power connector.

Environmental Requirements:

  • Operating and Storage Temperatures
  • Relative Humidity: 10% to 95% (non-condensing)

Physical Characteristics:

  • Dimensions: 4.33” L x 3.16” W x 0.91” H
  • Weight: 0.33 lb (150 g)

Certifications:

  • CE, FCC, ROHS, VCCI Class A

Warranty:

  • Limited Lifetime
Product form

Maximize your network's efficiency with the Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters. These innovative... Read more

Free local pickup in our store

SKU: SIGFO-065-1176ALFSMM
UPC: FO-065-1176ALFSMM

$690.00 $460.00

    • Shipped today? Order within: Jun 14, 2024 14:00:00 -0700

    Maximize your network's efficiency with the Signamax 10/100 to 100FX Single Fiber Wave Division Multiplexing (WDM) Media Converters. These innovative converters enable data transmission over a single strand of fiber optic cable, which traditionally requires two strands. By leveraging dual light spectra, they facilitate simultaneous bidirectional signal transmission. This groundbreaking technology effectively doubles your fiber optic network's capacity, offering considerable cost savings by reducing the need for additional fiber optic infrastructure.

    Available in both singlemode and multimode models, the Signamax converters can cover distances up to 40 kilometers (24.85 miles). For seamless operation, these WDM Switching Media Converters are designed to be used in A/B pairs. Each converter in this series is equipped with Link Fault Signaling, allowing SNMP managed switches to detect and respond to failures in fiber channels or twisted-pair connections. This feature ensures network resilience by enabling automatic rerouting to backup paths in switches equipped with the Spanning Tree Algorithm.

    Key Features:

    • Doubles fiber optic network capacity through single-strand transmission.
    • SC simplex connector for reliable connectivity.
    • DIP switch configuration enhances link fault signaling and fiber auto/force mode.
    • Built-in 10/100BaseT/TX Switch with store-and-forward architecture.
    • USB power option for versatile powering.
    • Supports wall, DIN-rail mounting, or use with media converter rack mount chassis.

    Specifications:

    Compliance with Standards:

    • IEEE 802.3 10BaseT
    • IEEE 802.3u 100BaseTX
    • IEEE 802.3u 100BaseFX

    Fixed Ports:

    • 1 RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port.
    • 1 WDM fiber optic 100BaseFX port, span varies per part number.

    LED Status Indicators:

    • Per Unit: Power
    • Per RJ-45 Port: Link/Activity, Full Duplex/Collision; RJ-45 port speed
    • Per Fiber Port: Link/Activity, Full Duplex/Collision

    Performance:

    • Latency: < 4.2 μs (LIFO)
    • Throughput per port: 148,809 pps (64-byte packets) at 100Base
    • Speed variations for half/full duplex at 100BaseTX and 10BaseT
    • MAC Address Capacity: 1K; Memory: 256 KB

    Fiber Interface Details:

    • Laser Type: VCSEL (Tx), FP Laser (Rx) for P/N 065-1176ALFSMM
    • Wavelengths: Transmit 850 nm, Receive 1310 nm for P/N 065-1176ALFSMM
    • Power: Output and Input levels for P/N 065-1176ALFSMM
    • Sensitivity and Link Power Budget for P/N 065-1176ALFSMM

    Electrical Characteristics:

    • 12 V DC power supply, optional USB power connector.

    Environmental Requirements:

    • Operating and Storage Temperatures
    • Relative Humidity: 10% to 95% (non-condensing)

    Physical Characteristics:

    • Dimensions: 4.33” L x 3.16” W x 0.91” H
    • Weight: 0.33 lb (150 g)

    Certifications:

    • CE, FCC, ROHS, VCCI Class A

    Warranty:

    • Limited Lifetime

    Reviews

    Signamax 10/100 to 100FX WDM Media Converter, SC/MM, 2km - Tx:1310/Rx:1550 nm - FO-065-1176ALFSMM

    Signamax 10/100 to 100FX WDM Media Converter, SC/MM, 2km - Tx:1310/Rx:1550 nm - FO-065-1176ALFSMM

    0 out of 5 stars

    This product has no reviews yet

    Recently viewed products

    © 2024 Tri-Tek Electronics, Powered by Shopify

      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Venmo
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account