Professional Microphones
Radio Design Labs Microphone 24 V Phantom Adapter - 2 Channel
Radio Design Labs ST-MPA24, Microphone 24 V Phantom Adapter - 2 Channel The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals. Therefore, the ST-MPA24 can convert any existing mic input into a phantom powered input.Module operation is from a 24 Vdc ground referenced power supply. The ST-MPA24 has an internal pass transistor-regulator filter circuit which permits this incoming voltage to be adjusted to the desired phantom voltage, up to 92% of the supply input voltage. A multi-turn trimming potentiometer is provided to reduce the phantom voltage if desired. In the default fully clockwise position, the ST-MPA24 provides "P24" 24 Vdc phantom voltage conformant to IEC 61938. Features Add Phantom Powered Mics to Standard Inputs Two Phantom Adapters in One Module P24 per IEC 61938 Phantom Conversion with Full Frequency Response Phantom Voltage Adjustable Up to IEC Standard 24 Vdc Highly-Filtered Phantom Power Specifications Channels: 2 Frequency Response: 20 Hz to 100 kHz (± 0.025 dB, 150 Ω source, 1 kΩ load) Phantom Voltage: P24, 24 Vdc Standard for Phantom: IEC 61938: 2013 Ambient Operating Environment: 0° C to 55° C Power Requirement: GROUND-REFERENCED, 24 Vdc @ 35 mA (with 20 mA load) Package Type: Cardboard Box Package Dimensions: 2 x 2 x 4 in. Shipping Weight: 0.2 lbs. WEEE weight: 0.145 lbs. Tariff code: 8518.40.2000
$172.46 $129.34
RDL Adjustable Gain Microphone Preamplifier - 35 to 65 dB gain
Radio Design Labs STM-2, Adjustable Gain Microphone Preamplifier - 35 to 65 dB gain Features: Low-Noise Mic Preamp Adjustable Output Level High or Low Impedance Mic Inputs Mic Input to 2 Line Outputs Two Balanced or Unbalanced Outputs Phantom Capability RF-Filtered Inputs Input: 500 Ω balanced; 5 kΩ unbalanced Phantom: 24 Vdc; IEC 61938: 2013, Filtered Outputs (2): +4 dBu 150 Ω balanced; -10 dBv unbalanced Frequency Response: 50 Hz to 30 kHz (± 1.5 dB) Gain: Adjustable 35 to 65 dB THD+N: < 0.05% (50 dB Gain) CMRR: >50 dB (50 Hz to 20 kHz) Residual Noise: < -70 dB (below +4 dBu 150 Ω source @ 50 dB gain) Headroom: > 20 dB (24 Vdc supply); > 14 dB (12 Vdc supply) Phantom Power Input: 24 to 33 Vdc @ 10 mA maximum Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 25 mA Ambient Operating Environment: 0° C to 55° C Dimensions: Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), Depth: 1.6 in. (3.9 cm) Package Type: Cardboard Box Package Dimensions: 2 x 2 x 4 in. Shipping Weight: 0.195 lbs. WEEE weight: 0.145 lbs. Tariff code: 8543.70.9960
$273.96 $205.47
Atlas Mic Clip 1.25in. to 1in. Taper, Black
Atlas MICCLIPP, Mic Clip 1.25in. to 1in. Taper, Black DESCRIPTION Made from rugged molded plastic; available in black. The MICCLIP can accomodate microphones with a tapered diameter of 1" - 1 1/2". FEATURES Made from Rugged Molded Plastic Accommodates Microphones with a Tapered Diameter of 1" - 1 1/2"
$13.95 $10.49
Shure Shure PGA58-LC Cardioid Dynamic Vocal Microphone w/ On-Off
Shure PGA58-LC Cardioid Dynamic Vocal Microphone w/ On-Off Switch The PGA58 delivers excellent sound for lead and backup vocal performance. Equipped with a discrete On / Off switch. Cable not included. The PGA58 is a professional quality vocal microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments. Download Shure PGA58 Product Specifications (.pdf) Frequency Response 50–16,000 Hz Phantom power required? No Polar Pattern Cardioid Type Dynamic
$68.00 $54.00
Hosa Spring-Clip Microphone Clip
Hosa Technology MHR-122, Spring-Clip Microphone Clip This microphone clip is designed to hold a dynamic microphone. It is ideal for use in touring and other live-sound applications. Features include: • Durability to withstand drops, bumps, and other live-sound hazards • Spring-clip accommodates a wide range of wired and wireless microphones • US and EU threads to accommodate most microphone stands
$10.99 $6.59
