Products

Vertical Cable 263-OSP03-10C06 SC MM OM3 UPC Mechanical Fiber Connector, 900µm Buffered, 6-Pack The Vertical Cable 263-OSP03-10C06 SC Multimode OM3 UPC Mechanical Fiber Connector is a field-installable solution designed for fast, reliable fiber terminations without the need for epoxy or polishing. Engineered for 900µm buffered multimode fiber, this connector provides a practical and efficient option for contractors performing on-site fiber installations and repairs. Tri-Tek Electronics is an authorized distributor of Vertical Cable products, ensuring full manufacturer warranty coverage, factory support, and competitive pricing for installers throughout Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, and Glendale, Arizona. Product Overview The 263-OSP03-10C06 mechanical connector is optimized for OM3 50/125µm multimode fiber and features an SC UPC interface for dependable optical performance. Its mechanical splice design allows quick field termination using standard fiber preparation tools, making it ideal for time-sensitive projects and service calls. Packaged in a convenient 6-piece kit, this solution is well suited for low voltage contractors, data technicians, and network installers who require flexibility and efficiency on job sites. Key Features • SC connector type with UPC polish• OM3 multimode fiber compatibility (50/125µm)• Designed for 900µm buffered fiber• Mechanical splice termination – no epoxy required• Fast field installation• Factory pre-polished ferrule• Supplied in a 6-pack Technical Specifications Connector TypeSC UPC Fiber TypeMultimode OM3, 50/125µm Cable Compatibility900µm Buffered Fiber Polish TypeUPC Termination MethodMechanical splice Packaging6 connectors per package Installation and Usage Scenario In a typical commercial installation in Phoenix or Mesa, a technician preparing to terminate OM3 multimode fiber inside a telecom room or wall-mounted enclosure can use the 263-OSP03-10C06 connector for rapid deployment. After properly stripping and cleaving the 900µm buffered fiber, the installer inserts the fiber into the mechanical connector body and secures it per manufacturer guidelines. This makes the connector ideal for: • Data center expansions• Office network retrofits• School and campus fiber upgrades• Security system backbone terminations• Emergency fiber repairs For Arizona contractors working under tight project deadlines, mechanical connectors eliminate curing time and reduce the need for expensive polishing equipment. Value for Installers and Technicians • Reduces labor time compared to traditional epoxy-and-polish connectors• Minimizes specialized tooling requirements• Provides reliable multimode performance for high-speed networks• Ideal for structured cabling and enterprise environments• Convenient 6-pack for small jobs or service calls Tri-Tek Electronics supports fiber optic professionals with local inventory at our Mesa, AZ retail location. We serve contractors and IT professionals throughout the greater Phoenix area with expert guidance and dependable product availability for fiber infrastructure projects.

Read more less

Dynacom 10600-SC-SM-WH SC Singlemode Simplex Keystone Fiber Coupler – White The Dynacom 10600-SC-SM-WH SC Singlemode Simplex Keystone Fiber Coupler is designed to provide a clean, secure, and professional fiber optic termination point in keystone wall plates, patch panels, and surface mount boxes. Engineered for singlemode (SM) fiber applications, this SC simplex coupler ensures reliable signal continuity in commercial, industrial, and residential low-voltage installations. Tri-Tek Electronics is an authorized distributor of Dynacom products, providing full manufacturer warranty coverage, factory support, and competitive pricing for installers and contractors throughout Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, Glendale, and across Arizona. Product Overview The 10600-SC-SM-WH keystone coupler allows two SC singlemode fiber patch cables to be connected through a standard keystone-style opening. Its white housing blends seamlessly into structured cabling environments where clean, organized cable management is critical. Ideal for: Structured cabling systems Fiber-to-the-desk deployments Telecom rooms and data centers FTTH (Fiber to the Home) applications Commercial AV and low-voltage installations Key Features SC to SC simplex fiber optic coupler Designed for singlemode (SM) fiber Keystone-style snap-in design White housing for clean wall plate installations Precision ceramic alignment sleeve for optimal performance Low insertion loss and high return loss performance Compatible with standard keystone wall plates and patch panels Durable construction for long-term reliability Technical Specifications Configuration Connector Type: SC Fiber Type: Singlemode (SM) Mode: Simplex Mounting Style: Keystone snap-in Performance Insertion Loss: ≤ 0.3 dB (typical) Return Loss: ≥ 50 dB Physical Housing Color: White Alignment Sleeve: Ceramic Body Material: High-impact plastic Installation Example In a Phoenix office build-out, an installer terminates backbone singlemode fiber from the MDF to individual office suites. The Dynacom 10600-SC-SM-WH is snapped into a standard keystone wall plate, allowing a clean SC patch connection from the wall to a network switch or fiber media converter. This setup provides: Easy maintenance access Clean, labeled infrastructure Reduced cable strain Professional finish for client-facing spaces For Arizona low-voltage contractors, this coupler simplifies fiber extensions and patching without requiring field polishing or splicing. Why Buy from Tri-Tek Electronics in Mesa, AZ? Tri-Tek Electronics supports Arizona installers with: Local retail location in Mesa, AZ Expert technical assistance Large in-stock inventory for fast turnaround Trusted support for commercial and residential projects Full manufacturer warranty coverage Whether you're outfitting a Scottsdale data room or installing fiber in a Tempe office renovation, Tri-Tek Electronics ensures dependable products and knowledgeable local service. Applications in Arizona Fiber Installations This SC singlemode simplex keystone coupler is commonly used in: Business park structured cabling projects in Chandler School campus fiber extensions in Glendale Healthcare facilities in Phoenix Residential fiber upgrades in Gilbert Its compatibility with standard keystone infrastructure makes it a practical choice for technicians seeking flexibility and performance.

Read more less

Vertical Cable 263-OSP03-10Y06 SC SM APC Mechanical Fiber Connector, 900µm Buffered, 6-Pack The Vertical Cable 263-OSP03-10Y06 SC Single Mode APC Mechanical Fiber Connector is a professional field-installable termination solution designed for 9/125µm single mode fiber. Built for 900µm buffered fiber, this connector provides fast, reliable terminations without epoxy or polishing—making it ideal for contractors and fiber technicians working in demanding network environments. Tri-Tek Electronics is an authorized distributor of Vertical Cable products, ensuring full manufacturer warranty coverage, factory support, and competitive pricing for installers throughout Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, and Glendale, Arizona. Product Overview The 263-OSP03-10Y06 features an SC APC (Angled Physical Contact) interface, engineered for low back reflection and optimal performance in single mode fiber systems. Its mechanical splice design and factory pre-polished ferrule allow for rapid field termination using standard fiber prep and cleaving tools. This 6-pack configuration is ideal for structured cabling installations, FTTH deployments, telecom rooms, and service calls requiring dependable single mode performance. Key Features • SC connector with APC polish (angled end face)• Single mode fiber compatibility (9/125µm)• Designed for 900µm buffered fiber• Mechanical splice termination – no epoxy required• Factory pre-polished ferrule• Low back reflection performance• Supplied in a 6-pack Technical Specifications Connector TypeSC APC Fiber TypeSingle Mode, 9/125µm Cable Compatibility900µm Buffered Fiber Polish TypeAPC (Angled Physical Contact) Termination MethodMechanical splice Packaging6 connectors per package Installation & Application Scenario For contractors performing FTTH installations or terminating single mode backbone fiber in a commercial building in Phoenix or Mesa, the 263-OSP03-10Y06 provides a quick and efficient solution. After properly stripping and precision cleaving the 900µm buffered fiber, the technician inserts the fiber into the connector body and secures the mechanical splice according to installation procedures. This connector is ideal for: • Fiber-to-the-home (FTTH) installations• Telecom and ISP deployments• Single mode backbone terminations• Security and surveillance fiber links• Enterprise and campus fiber infrastructure The APC polish is especially beneficial in applications requiring reduced return loss, such as long-distance or high-bandwidth single mode systems. Benefits for Installers & Technicians • Eliminates epoxy curing and polishing time• Reduces specialized tooling requirements• Provides low-reflection performance for sensitive applications• Ideal for fast service calls and new installations• Convenient 6-pack for small projects and maintenance work For Arizona fiber professionals, Tri-Tek Electronics maintains local inventory at our Mesa, AZ retail location to help ensure fast project turnaround. We proudly support Phoenix-area low voltage contractors with dependable stock and knowledgeable service. Why Buy from Tri-Tek Electronics • Authorized Vertical Cable distributor• Full manufacturer warranty coverage• Local inventory in Mesa, AZ• Trusted supplier to Phoenix-area fiber installers• Serving Mesa, Chandler, Tempe, Gilbert, Scottsdale, and Glendale

Read more less

Vertical Cable 263-OSP03-10Z06 SC SM UPC Mechanical Fiber Connector, 900µm Buffered, 6-Pack The Vertical Cable 263-OSP03-10Z06 SC Single Mode UPC Mechanical Fiber Connector is a professional field-installable solution designed for terminating 9/125µm single mode fiber quickly and reliably. Engineered for 900µm buffered fiber, this connector eliminates the need for epoxy and polishing, making it ideal for fast-paced fiber installations and service calls. Tri-Tek Electronics is an authorized distributor of Vertical Cable products, ensuring full manufacturer warranty coverage, factory-direct support, and competitive pricing for contractors and fiber technicians throughout Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, and Glendale, Arizona. Product Overview The 263-OSP03-10Z06 features an SC UPC (Ultra Physical Contact) polished interface optimized for single mode applications requiring low insertion loss and dependable signal transmission. Its mechanical splice design incorporates a factory pre-polished ferrule, enabling rapid field termination using standard fiber preparation and cleaving tools. Packaged in a convenient 6-piece kit, this connector is well-suited for telecom rooms, FTTH deployments, enterprise backbone installations, and security system fiber links. Key Features • SC connector with UPC polish• Single mode fiber compatibility (9/125µm)• Designed for 900µm buffered fiber• Mechanical splice termination – no epoxy required• Factory pre-polished ferrule• Low insertion loss performance• Supplied in a 6-pack Technical Specifications Connector TypeSC UPC Fiber TypeSingle Mode, 9/125µm Cable Compatibility900µm Buffered Fiber Polish TypeUPC (Ultra Physical Contact) Termination MethodMechanical splice Packaging6 connectors per package Installation & Application Scenario During a commercial buildout in Phoenix or a campus fiber upgrade in Mesa, technicians often need to terminate single mode fiber quickly inside patch panels or wall-mounted fiber enclosures. After stripping and precision cleaving the 900µm buffered fiber, the installer inserts the fiber into the mechanical connector body and secures the splice according to standard procedures. Typical applications include: • Enterprise backbone terminations• ISP and telecom room installations• Fiber-to-the-home (FTTH) service calls• Surveillance and access control fiber links• Inter-building fiber connections The UPC polish is ideal for general single mode applications where low insertion loss and reliable signal transfer are required. Benefits for Installers & Technicians • Reduces labor time compared to epoxy-and-polish connectors• Eliminates curing and polishing equipment• Provides consistent single mode performance• Ideal for both new construction and retrofit projects• Convenient 6-pack for service vehicles and job sites Tri-Tek Electronics maintains local inventory at our Mesa, AZ retail location to support fiber professionals across the greater Phoenix metro area. Our team helps contractors complete projects efficiently with dependable product availability and knowledgeable support. Why Buy from Tri-Tek Electronics • Authorized Vertical Cable distributor• Full manufacturer warranty coverage• Local Arizona inventory in Mesa• Trusted supplier to Phoenix-area fiber contractors• Serving Mesa, Chandler, Tempe, Gilbert, Scottsdale, and Glendale

Read more less