CCTV Power and Baluns

TTBLN-1KPS, Cat5e CCTV Video Balun Pair Run CCTV or Composite Video over Cat 5e or Cat 6 cable up to 1000'!   Features: 1 Channel passive video transceiver. Receiving and transmitting video signals over UTP cable without using the power supply (CAT5) DC Loop Resistance 52 ohms per 1,000 ft(18 ohms per 100m) Built-in transient protection design Enable cost-effective, point to point transmission appliance Easy Installation Dimensions(mm): 32mm x 21mm x 15mm Weight: 18g Environment: Temperature:-10C~+50C Humidity:0~95%

Read more less

TTBLN-1KPSHD-CBL, HD CCT Video Balun Pair with Cable Lead Run Hi-Def TVI/AHD/960H CCTV or Composite Video over Cat 5e or Cat 6 cable up to 820'! Features: HD-TVI / HD-CVI / AHD / ANALOG (1080P/720P/960H) Real-time Transmission over UTP cat5e/6  Ultra-High Frequency Compatible with all HD-TVI,CVI and AHD analog camera  Push-in Wire Terminals  Built-in Surge and Lightning Protection

Read more less

TTBLN-1KPTHD, HD CCTV Balun Video + Power Set Run Hi-Def TVI/AHD/960H CCTV or Composite Video over Cat 5e or Cat 6 cable up to 820'!   Features: HD-TVI / HD-CVI / AHD / ANALOG (1080P/720P/960H) Real-time Transmission over UTP cat5e/6  Compatible with all HD-TVI,CVI and AHD analog camera  Stackable Design, Extend One Channel to Multi-Channel  RJ45 Jack for UTP cable  Built-in Surge and Lightning Protection

Read more less

DB-12VDC-9-10A, 9 channel 12V DC 10Amp Power Supply Distribution Box Features include: Input 100-240 VAC Output 12V DC, 9 Channels 10 Amp Supply Current Integral Surge Protection Individual LED Power Indication Individual PTC Output Protection Max Amp: 2 Amp/ch The case measures 9.7in x 8.2in x 3.2in.   General Protection: Individual PTC (Positive Temperature Coefficient) Fuse and LED indicator on each output. When a problem occurs, it will only affect the individual output, other outputs continue to work. Short Circuit Protection: When a short circuit occurs, the individual PTC Fuse will cut off the circuit; when the breakdown is corrected, the PTC Fuse will restore the circuit automatically. High Voltage Protection: When high voltage occurs, the built in surge protection will protect the connected device. Over Current Protection: When over current occurs, the power supply will automatically switch to self-protection mode. When corrected it will return to normal state.    

Read more less

DB-12VDC-18-20A, 12VDC-18P/20A 18 PTC Output CCTV Distributed Power Supply Input 110/220 V AC Output 12V DC 18channels 20 Amp Supply Current Integral Surge Protection Individual LED Power Indication

Read more less

DB-12VDC-18RM 1.5U 18-port 12VDC 20A Rack Mounted Power Supply Applications: Security Systems CCTV Systems PTZ, IR Illuminators Video Processors Access Control Features: General Protection: There are individual, re-settable PTC (Positive Temperature Coefficient) fuses and LED indicators on each output. If any PTC fuse breaks down, it will not effect any other output. Short Circuit Protection: In the event of a short circuit, the power supply and connected devices will be protected by the main PTC fuse and each individual PTC fuse. High Voltage Protection: In the event of a high voltage surge, the surge protection will be automatically activated to protect connected devices. Over Current Protection: When there is an over current, power supply will automatically switch to self-protection status by cutting off PTC fuse.   Specifications: Ports 18 Output Voltage DC 12V Output Current 20A Total Fuse Type PTC Max Amps 2A per channel Dimensions 19"W x 8"D x 2.6"H Weight 9.5 lbs.

Read more less

Vigitron 1204VPD, 4 Channel Video Balun & Data/ Power Combiner Hub The Vi1204VPD is a passive transceiver device that combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 4 cameras for up to 750 feet (228 m) and is designed to be installed in the control room. The Vi1204VPD receives low-voltage camera power from any third party multi output class II power supply. Each camera power output is equipped with a self-resetting fuse for extra protection. At the camera end the Vi1053VPD video balun/combiner provides video, power and data on separate outputs. The Vi1204VPD should be installed at the "head-end".  The video connections are through 4 BNC connectors and Coax cables to the DVR. The data connections to the DVR are through 4-pair RJ-45 cables. All equipment follows industry standard EIA/TIA 568B pinouts. The Vi1204VPD is an ideal CCTV component for a structured cabling environment.   Features: • Combines video, power and data into a single RJ-45 4-pair   cable for up to 750 feet (228 m) • Supports up to 4 cameras • Built-in passive transceivers with surge protection • Power present indicator for each camera • 60 dB cross talk and noise immunity • 1U high rack mountable with a Vi0010 panel • Individual 1.5 A self-resetting power fuse for each channel • Can use any third party class II power supply • Designed for structured wiring applications • Limited lifetime warranty  

Read more less

Vigitron Inc. Vi1508VPD, 8-Channel Powered Video-Data-Power (VPD)   The Vi1508VPD is a passive transceiver device that also combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 8 cameras for up to 750 feet (228 m) and is designed to be installed in the control room. The Vi1508VPD has a built-in 8 channel fully isolated class II 28/24 VAC power supply. Each camera power output is equipped with a 2 A glass fuse accessible from front panel for extra protection. At the camera end the Vi1053VPD video balun/combiner provides video, power and data on separate outputs. The video connections are through 8 BNC connectors and to the DVR or matrix switch. The data connections to the DVR are through 4-pair RJ-45 cables. There is a separate data connection for each camera. All equipment follows industry-standard EIA/TIA 568B pinouts. The Vi1508VPD is an ideal CCTV component for structured cabling environment.   Supports up to 8 cameras by providing video, class II power,   and data on a single Cat-5 cable per camera for up to 750   feet (230m) • Built-in passive transceivers with surge protection • 8 isolated camera power individually selectable 24 or 28 VAC   at 1 A max per channel, 6 A aggregated • A glass fuse per channel, accessible from front panel • Use with the Vi1053VPD transceiver at the camera • Power present and fault indicator LEDs for each camera • 60 dB cross talk and noise suppression on video signals • 1U high wall or rack mountable • Designed for structured wiring applications • Limited lifetime warranty    

Read more less

Versitron Vi1003M, Passive Transceiver with Surge Protection - Right Angle - Male BNC The Vigitron Vi1003M is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 feet (228 m). Distances up to 3,000 feet (915 m) can be achieved when it is used with Vigitron active receivers.   It uses category 2-7 twisted pair wires, is easy to install, cost effective and does not require power. The Vi1003M's unique and compact design allows mounting directly to the video source or receiver without any additional cabling. The Vi1003M is compatible with all qualified cameras with built-in twisted pair transmitters. The Vi1003M has built-in surge suppression to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals. The Vi1003M offers quality video in a compact size at a highly affordable price. It is ideal for a wide variety of applications such as security and surveillance.   Features: • Quality video over 750 feet (228 m) of unshielded twisted pair wires • 3,000 feet (915 m) with Vigitron active receivers • NTSC, PAL and SECAM video formats • Support for "up-the-coax" type signals • No power required • Built-in differential surge protection • 60 dB crosstalk and noise immunity • Compact size and easy installation • Compatible with all qualified UTP cameras • Limited lifetime warranty   Download the Vigitron spec sheet (.pdf)

Read more less

Vigitron Vi1053VPD, Video Balun & Data & Power Combiner The Vi1053VPD is a passive device that transports a single channel of video, RS-422/RS-485 data, and camera power over Category 5 cable for distances up to 750 ft. (228 m) when used with passive transceivers. Its extremely compact size makes it possible to be used in a wide variety of applications. It may be used with Vi12xxVPD or Vi15xxVPD series for shorter distances and Vi13xxVPD or Vi14xxVPD series for longer distances.   The Vi1053VPD connects to Category 5 cable via RJ-45. It provides a set of break-out cables; one pair each for power and data and a coax cable with BNC for video. For longer distances, it can be used with Vigitron Multi-Channel VPD Combiners and Active UTP Receivers to centralize power and extend video up to 3,000 ft. (915 m).   The Vi1053VPD has built-in surge suppression to protect video equipment against damaging voltage spikes. Its exceptional noise immunity ensures quality video signals. The Vi1053VPD is an ideal CCTV component for a structured cabling environment.   Features: Combines video, power and data into a single RJ-45 4-pair cable for up to 750 ft. (228 m) NTSC, PAL and SECAM video format Built-in passive transceiver with surge protection Built-in surge protection for video Support for "up-the-coax" type signals 60 dB cross talk and noise immunity Compact size and easy installation Designed for structured wiring applications Limited lifetime warranty   Download the Vigitron spec sheet (.pdf)

Read more less

Vigitron Vi1051VP, UTP Combiner Transceiver   The Vi1051VP is a passive device that transports video and camera power over a single Category 5 cable for distances up to 750 feet (228m). Its extremely compact size makes it possible to be used in a wide variety of applications. It may be used with the Vi1200VPD or Vi1500VPD series for shorter distances and with Vi1300VPD or Vi1400VPD series for longer distances. It connects to category 5 cable via its RJ-45 connector and its 12 VDC power output is available on a 9 inches pigtail wire. For shorter runs, it can be used with Vigitron Vi1200VPD or Vi1500VPD combiner-receiver series. While longer distances can be achieved by using it with Vi1300VPD or Vi1400VPD combiner series and Vigitron active UTP receivers. The Vi1051VP has built-in surge suppression to protect video equipment against damaging voltage spikes. Its exceptional noise immunity ensures quality video signals. The Vi1051VP is an ideal CCTV component for a structured cabling environment.   Features: • Combines video and power into a single RJ-45 4-pair cable   for up to 750 feet (228 m) • NTSC, PAL and SECAM video format • Built-in passive transceiver • Built-in surge protection for video • Support for "up-the-coax" type signals • 60 dB cross talk and noise immunity • Compact size and easy installation • Designed for structured wiring applications • Limited lifetime warranty   Download the Vigitron spec sheet (.pdf)  

Read more less

Vigitron Vi1061 Miniature Video Isolation Transformer The Vigitron Vi1061 is a video isolation transformer designed for base-band composite video signals. The annoying and potentially damaging hum bars on the screen are caused by ground voltage potential differences between your video equipment that is called ground loop. The Vi1061 provides complete isolation between devices and eliminates video hum bars, ground loops, and DC offsets which can degrade picture quality and potentially damage video equipment. The Vi1061 connects easily to your video equipment through coax cables close to the receiving equipment such as monitors. It benefits from a unique packaging that preserves its specifications in different environments. Its wide bandwidth and low insertion loss makes it an ideal solution for eliminating ground loop problems for a wide variety of applications.    Features: Eliminates video ground loop distortions Low insertion loss and constant group-delay Flat frequency and linear phase response NTSC, PAL, and SECAM video formats Support for "up-the-coax" type signals No power required Wide bandwidth from 20 Hz to 5.5 MHz Compact size and easy in-line or wall-mount installation Compact and rugged packaging 500 VDC isolation voltage Limited lifetime warranty

Read more less