Products

PI Mfg TTA‑1178 Surface Mount Mini IR Receiver — Closeout Special Overview The PI Manufacturing TTA‑1178 Surface Mount Mini IR Receiver (Dual Band) is a compact, low-profile infrared sensor module designed to receive IR commands from remote controls over both standard and expanded IR bands. As a closeout item, it is offered in limited quantities, while stock lasts. As an authorized distributor, Tri‑Tek Electronics provides full manufacturer warranty coverage and local support for installers, AV integrators, and system designers in the Phoenix / Mesa, AZ region. Key Features Dual‑band infrared reception (supports broad IR remote frequencies) IR pickup range up to ~ 40 feet Blue LED indicator to confirm IR reception 3-meter integral cable (prewired) 3.5 mm stereo mini‑plug connector Tip = Signal Ring = +V Sleeve = Ground Surface‑mountable housing, unobtrusive design Compact footprint ideal for tight installations Typical Use / Installation Example This mini IR receiver is ideal for home theater, custom AV racks, or cabinetry where you wish to place an IR “eye” behind a small window (e.g. plastic or acrylic) or exposed discreetly. You mount the unit in a flush or surface-mount position and route the cable back to your IR control system or IR repeater block. The dual-band design ensures compatibility with a wider variety of remote control frequencies, minimizing “dead zone” issues. For example, in a media cabinet with smoked glass doors, you might install the TTA‑1178 directly behind a small IR-transparent decal or window. The 3 m cable then carries the IR signal back to your IR processor or system controller. Specifications Parameter Specification IR Frequency / Band Dual band (wide remote compatibility) Range ~ 40 ft Indicator Blue LED (IR reception confirmation) Cable Length 3 meters Connector 3.5 mm stereo mini‑plug Pinout Tip = Signal, Ring = +V, Sleeve = Ground Mounting Surface mount housing (low profile) Warranty Full manufacturer warranty via Tri‑Tek Electronics Special Note Closeout item — limited inventory Important Notes & Recommendations Because this is a closeout product, once current inventory is depleted, it will not be restocked. Use care when routing the IR cable: avoid sharp bends and maintain good grounding to reduce noise or interference. The LED confirmation helps with alignment and setup: place the receiver eye where the LED is visible during commissioning. If mounting behind a cover or window, ensure the covering material is IR‑transparent (e.g. thin acrylic, IR-permeable plastic) to avoid signal attenuation. In long cable runs, verify voltage at the receiver end and avoid excessive voltage drop. Why Buy Through Tri‑Tek Electronics? Authorized distributor status ensures full factory warranty, product authenticity, and support. Local AZ presence in Mesa / Phoenix ensures faster delivery, easier returns, and local technical assistance. Closeout pricing advantage—you benefit from reduced cost while quality remains factory-grade. Would you like me to prepare a wiring diagram, high‑res render of the unit for your web page, or a printable installation guide?

Read more less

Steren 905-308, Surge Supressor 6-Outlet Wall Mount   Steren 905-308 Surge Supressor 6-Outlet Wall Mount Tap Phone Modem Fax Surge Protector 420 Joules 3-Line Protection LED Indicator Light 120 VAC UL Listed Plug-In wall mounted surge protector. Specifications: 3-wire NEMA 5-15 grounded outlets High impact ABS plastic housing 120 VAC, 15 A, 1875 W EMI-RFI Noise Filtration 420 Joules Response Time < 1 ns UL Listed  

Read more less

Switch Craft 3C XLR Inline Jack The Switchcraft AAA3FZ is a premium 3-pin XLR female connector, part of Switchcraft's renowned AAA Series. Known for its robust design and reliable performance, this connector is ideal for professional audio applications, including live sound, recording studios, and broadcast environments. The AAA3FZ features Switchcraft’s unique low-profile design and the company's easy-to-assemble "Z" series components, which ensure secure and durable connections. Product Features: Connector Type: 3-pin XLR Female Series: AAA Series (also known as the "Z" series) Design: Low-profile design with a compact, lightweight construction for easy integration into tight spaces Contacts: Precision-machined, silver-plated contacts for optimal signal integrity and minimal signal loss Housing: Rugged metal shell designed to withstand heavy use and resist wear and tear Assembly: Simple, no-solder design for quick and easy cable assembly Application: Ideal for use in professional audio environments, such as live sound, recording studios, and broadcast setups Example Installation Scenario The Switchcraft AAA3FZ connector is perfect for assembling custom microphone cables in a recording studio. Its easy-to-assemble design allows for quick setup, while the durable construction ensures that the connector will hold up under frequent use. This connector is especially useful in environments where reliable, high-quality audio connections are critical. Tri-Tek Electronics: Your Authorized Distributor Tri-Tek Electronics is an authorized distributor of Switchcraft products, including the AAA3FZ XLR Female Connector. When you purchase from us, you benefit from full manufacturer warranty coverage, competitive pricing, and expert factory support. Visit our retail location in Mesa, AZ, to purchase this connector and receive personalized advice from our knowledgeable staff.

Read more less

Switchcraft AAA3FZ, 3-Pin XLR Female Mic Connector Cable Mount Product Overview The Switchcraft AAA3FZ is a premium 3-Pin XLR Female Mic Connector, designed for professional audio applications requiring high-quality signal transmission and reliable performance. This cable mount connector is part of Switchcraft's renowned AAA Series, known for its rugged durability and superior engineering. It is an essential component for building or repairing XLR cables used in audio systems, microphones, and other equipment. Switchcraft, a leading manufacturer of connectors and audio components, ensures that the AAA3FZ provides excellent connectivity with minimal signal loss, making it a top choice for audio professionals, installers, and technicians. Features Connector Type: 3-Pin XLR Female Mounting Style: Cable Mount Durable Construction: Metal shell provides long-lasting durability Easy Assembly: Solder-style terminals for secure wire connections Gold-Plated Contacts: Ensures excellent conductivity and resistance to corrosion Compact Design: Ideal for tight spaces and professional setups Color: Black (with optional color-coded boots for easy identification) Specifications Connector Type: XLR Female Number of Pins: 3 Termination: Solder terminals Shell Material: Metal with nickel plating Contact Material: Gold-plated for optimal conductivity Current Rating: 15A Operating Temperature: -55°C to +85°C Dimensions: Standard XLR size compatible with most XLR plugs Installation Scenario The Switchcraft AAA3FZ is ideal for assembling custom microphone cables, especially in live sound environments where reliability is paramount. For example, this connector can be used in a home studio to create custom-length XLR cables that connect microphones to audio interfaces or mixers, ensuring clean, high-quality audio capture with minimal interference. Its durable design makes it suitable for on-the-road use in demanding environments such as touring or event production. Why Choose Switchcraft AAA3FZ? Professional-Grade Quality: Trusted by audio professionals worldwide for its reliability and performance. Easy to Use: Designed for straightforward installation with solder-style terminals. Long-Lasting Durability: Built to withstand rigorous use in professional audio environments. Versatility: Suitable for a wide range of applications, from home studios to large-scale live events. As an authorized distributor of Switchcraft products, Tri-Tek Electronics ensures that you receive the full manufacturer's warranty and the best support and pricing available. Visit our retail location in Mesa, AZ, or shop online for expert assistance with your audio connectivity needs. The Switchcraft AAA3FZ is a premium 3-Pin XLR Female Mic Connector, designed for professional audio applications requiring high-quality signal transmission and reliable performance. This cable mount connector is part of Switchcraft's renowned AAA Series, known for its rugged durability and superior engineering. It is an essential component for building or repairing XLR cables used in audio systems, microphones, and other equipment. Switchcraft, a leading manufacturer of connectors and audio components, ensures that the AAA3FZ provides excellent connectivity with minimal signal loss, making it a top choice for audio professionals, installers, and technicians. Features Connector Type: 3-Pin XLR Female Mounting Style: Cable Mount Durable Construction: Metal shell provides long-lasting durability Easy Assembly: Solder-style terminals for secure wire connections Gold-Plated Contacts: Ensures excellent conductivity and resistance to corrosion Compact Design: Ideal for tight spaces and professional setups Color: Black (with optional color-coded boots for easy identification) Specifications Connector Type: XLR Female Number of Pins: 3 Termination: Solder terminals Shell Material: Metal with nickel plating Contact Material: Gold-plated for optimal conductivity Current Rating: 15A Operating Temperature: -55°C to +85°C Dimensions: Standard XLR size compatible with most XLR plugs Installation Scenario The Switchcraft AAA3FZ is ideal for assembling custom microphone cables, especially in live sound environments where reliability is paramount. For example, this connector can be used in a home studio to create custom-length XLR cables that connect microphones to audio interfaces or mixers, ensuring clean, high-quality audio capture with minimal interference. Its durable design makes it suitable for on-the-road use in demanding environments such as touring or event production. Why Choose Switchcraft AAA3FZ? Professional-Grade Quality: Trusted by audio professionals worldwide for its reliability and performance. Easy to Use: Designed for straightforward installation with solder-style terminals. Long-Lasting Durability: Built to withstand rigorous use in professional audio environments. Versatility: Suitable for a wide range of applications, from home studios to large-scale live events. As an authorized distributor of Switchcraft products, Tri-Tek Electronics ensures that you receive the full manufacturer's warranty and the best support and pricing available. Visit our retail location in Mesa, AZ, or shop online for expert assistance with your audio connectivity needs.

Read more less

PHC Enterprises SW-122T3 Switching 12VDC 2.2A w/Screw Terminals The PHC Enterprises SW-122T3 is a robust and reliable 12V DC switching power supply designed for a wide range of low-voltage applications. Featuring screw terminals for easy and secure connections, this power supply ensures efficient and stable performance, making it an ideal choice for both professional installers and DIY enthusiasts. The SW-122T3 is engineered to deliver 2.2A of continuous current, providing ample power for various electronic devices and systems. As an authorized distributor, Tri-Tek Electronics guarantees that all PHC Enterprises products come with full manufacturer warranty coverage, ensuring the best pricing and factory support. Key Features Input Voltage: 100-240V AC, 50/60Hz Output Voltage: 12V DC Output Current: 2.2A continuous Connections: Screw terminals for secure and easy installation Efficiency: High efficiency with minimal heat generation Protections: Over-voltage, over-current, and short-circuit protections Certifications: UL, CE, RoHS compliant Specifications Feature Specification Input Voltage 100-240V AC, 50/60Hz Output Voltage 12V DC Output Current 2.2A Power Efficiency >85% Dimensions 80mm x 50mm x 35mm Weight 150g Operating Temperature -20°C to +50°C Storage Temperature -40°C to +85°C Humidity 20% to 90% non-condensing Mounting Type Surface mountable Protection Class Class II Applications The PHC Enterprises SW-122T3 is perfect for a variety of applications including: Security Systems: Powering cameras, sensors, and control panels. LED Lighting: Suitable for low-voltage LED strips and modules. Home Automation: Ideal for smart home devices and controllers. Industrial Equipment: Reliable power source for industrial control systems. Electronics Projects: Great for hobbyists and prototype development. Installation Example For a typical installation, the SW-122T3 can be mounted on a flat surface inside a protective enclosure. The screw terminals make it straightforward to connect the power supply to your devices. For instance, in a security system setup, the SW-122T3 can provide a steady 12V DC to multiple cameras and sensors, ensuring uninterrupted surveillance. Why Choose Tri-Tek Electronics? As a trusted partner of PHC Enterprises, Tri-Tek Electronics offers authorized distribution of the SW-122T3 power supply. This ensures that you receive genuine products with complete manufacturer warranty and support. Our commitment to quality and customer satisfaction means you can count on us for the best service and value.

Read more less

3M 952, T-Tap Self-Stripping Disconnect 18-14AWG, Bag of 10 pcs. Upgrade your electrical connections with 3M 952 T-Tap Disconnects. Designed to easily self-strip and connect 18-14AWG wires, this bag of 10 offers convenient, secure, and reliable connectivity. Perfect for DIY or professional use, enhance your projects with 3M quality and expertise.

Read more less

Eclipse Tools 800-035 T08 Star Tip Screwdriver – Closeout Special The Eclipse Tools 800-035 T08 Star Tip Screwdriver is a high-quality precision tool designed for professionals and DIY enthusiasts alike. This T08 star tip screwdriver features a durable, ergonomic handle for a comfortable grip, providing maximum control and torque during use. Ideal for use on electronics, small appliances, and other equipment that requires star or Torx screws, the Eclipse 800-035 ensures precision and reliability for any task. Built with a hardened steel tip for long-lasting durability, this screwdriver is designed to withstand daily use in demanding environments. Its compact size makes it a perfect addition to any technician's toolkit. Product Features: T08 Star Tip: Precision-machined for a perfect fit with T08 star/Torx screws. Durable Construction: Made with a hardened steel tip for long-lasting performance. Ergonomic Handle: Provides a comfortable, non-slip grip for maximum control and torque. Ideal for Electronics and Small Devices: Perfect for working on electronics, small appliances, and equipment requiring T08 star screws. Compact Size: Easy to carry and store in toolboxes or pockets. Specifications: Model Number: 800-035 Tip Type: T08 Star/Torx Material: Hardened steel tip with an ergonomic handle Usage: Designed for electronics, appliances, and devices requiring T08 star screws Closeout Special: This is a Closeout Special, and availability is limited to stock on hand. Once stock is gone, this product will no longer be available, so don't miss your chance to secure this high-quality screwdriver at a great price. Example Installation Scenario: The Eclipse Tools 800-035 T08 Star Tip Screwdriver is ideal for use in electronics repair. Whether you’re working on laptops, mobile devices, or small appliances that utilize T08 star screws, this precision screwdriver offers the perfect fit and grip, allowing for efficient and accurate repairs. Its ergonomic handle provides comfort during long repair sessions, making it a valuable tool for technicians. Warranty and Authorized Distributor: Tri-Tek Electronics is an authorized distributor of Eclipse Tools, ensuring that you receive full manufacturer warranty coverage, competitive pricing, and factory support with your purchase. This closeout deal is only available while supplies last.

Read more less

Sunray Lighting's 1819 Miniature Incandescent Lamp 🔹 Designed for long-lasting performance🔹 Easy to install with a miniature bayonet (BA9s) base and T3.25 bulb shape. 🔹 Operates at 28 volts and .04 amps, perfect for automotive use. 🔹 Average life rating of 2,500 hours ensures durability in all weather conditions. 🔹 Closeout special - limited price and availability based on stock on hand. Product Specifications: - Brand: Sunray Lighting - Model: 1819 - Base Type: Miniature bayonet (BA9s) - Bulb Shape: T3.25 - Voltage: 28 volts - Current: 0.04 amps - Average Life: 2,500 hours Tri-Tek Electronics is an authorized distributor of Sunray Lighting, ensuring you receive top-quality products and excellent customer service. Don't miss out on this exceptional value - order now before stock runs out!

Read more less

Manufacturer: Eclipse Tools Manufacturer Part Number: 800-052 Description: The Eclipse Tools 800-052 Folding Security Torx Set is the ultimate companion for electronics technicians, IT professionals, and low voltage installers. This versatile set includes eight chrome-plated folding security star tip keys, ranging from T9 to T40, ensuring you have the right tool for any job. Key Features: • Folding Design: The folding design of these star tip keys allows for easy storage and portability, making them perfect for on-the-go professionals. • High-Quality Construction: Each key in this set is chrome-plated for enhanced durability and corrosion resistance, ensuring they will withstand the test of time. • Wide Range of Sizes: With sizes ranging from T9 to T40, this set covers a wide range of applications, making it a must-have for any professional toolbox. Product Details: The Eclipse 800-052 Folding Security Torx Set includes the following folding security star tip keys: T9H, T10H, T15H, T20H, T25H, T27H, T30H, and T40H. These keys are chrome-plated for maximum durability and come in a green lacquered case for easy storage and organization. Whether you're working on electronics, IT equipment, or low voltage installations, this folding security torx set is designed to meet your needs. The folding design allows for convenient storage in your pocket or toolbox, so you can always have the right tool on hand. The chrome-plated construction ensures that these keys will withstand heavy use and resist corrosion, providing you with reliable performance for years to come. Tri-Tek Electronics is proud to be an authorized distributor of Eclipse Tools, a trusted brand known for their high-quality and reliable products. With the Eclipse 800-052 Folding Security Torx Set, you can trust that you're getting a tool that will help you get the job done efficiently and effectively. Invest in the Eclipse 800-052 Folding Security Torx Set and experience the convenience, durability, and versatility that this essential tool offers. Upgrade your toolbox today and tackle any task with confidence.

Read more less

Philmore 10-602, Tapered Cylinder Rubber Foot or Bumper 12 Pack For use on chassis boxes and equipment cabinets. Rubber feet/bumpers are self-adhesive and supplied on a backing sheet. Application simply requires peeling individual foot from the backing and sticking it to your cabinet or chassis box. Soft rubber but will not leave marks on hard surfaces. Soft but firm, these items make good bumpers, feet for chassis boxes and spacers for PC boards. All are black in color and about 70 durometer hardness.   Shaped like a tapered cylinder, self adhesive and will stick well to a chassis box. May be used with a no. 8 wood screw or machine screw, if necessary. Semi-soft rubber does not normal leave marks. Diameter at base: .870" Height: .40"  

Read more less

Philmore 10-610, Tapered Square Rubber Foot or Bumper 12 Pack For use on chassis boxes and equipment cabinets. Rubber feet/bumpers are self-adhesive and supplied on a backing sheet. Application simply requires peeling individual foot from the backing and sticking it to your cabinet or chassis box. Soft rubber but will not leave marks on hard surfaces. Soft but firm, these items make good bumpers, feet for chassis boxes and spacers for PC boards. All are black in color and about 70 durometer hardness.   Self adhesive and will stick well to a chassis box. Semi-soft rubber does not normally leave marks. Diameter at base: .50" Height: .237"  

Read more less

Triplett LVPRO10 TDR/Cable Tester Overview The Triplett LVPRO10 is an all-in-one TDR (Time Domain Reflectometry) cable tester designed for LAN installers, network technicians, and repair professionals. It delivers comprehensive diagnostics for both twisted-pair and coaxial cables, combining precision fault detection, tracing, and PoE analysis into a single, rugged handheld device. Tri-Tek Electronics, located in Mesa, AZ, proudly offers this model with full manufacturer warranty, competitive pricing, and expert factory support—ensuring a reliable tool for installers and technical professionals. Key Features Dual Cable Support: Tests and traces UTP twisted-pair (Cat 5E/6/6A/8) and coaxial (50Ω, 75Ω, 93Ω) cables with high accuracy. Fault Diagnostics: Identifies opens, shorts, reversals, split pairs, and verifies cable continuity. Length Measurement: Measures cable length up to approximately 500m (1,640 ft) with ±4% or ±2 ft (0.6 m) accuracy. PoE Detection & Ethernet Port Testing: Detects Power over Ethernet (standards 802.3AF, AT, BT) and validates port functionality via Ethernet analysis. Tone-Tracing Capability: Includes a tone mode to trace specific cables within bundled runs. Built-In Ports & Display: Equipped with RJ11, RJ45, and coax connectors and a 2.8-inch backlit graphical LCD for clear readings in all conditions. Safety & Convenience: Features 70 VDC protection, auto power-off, and a tracer probe with NCV detection (> 40 V), flashlight, wiremap indicators, low-battery alert, and headphone jack—ideal for noisy or dim environments. Download LVPRO10 User Manual (.pdf) Specifications Specification Details Cable Types Twisted-pair (Cat 5E/6/6A/8), Coax (50/75/93Ω) Fault Detection Continuity, opens, shorts, reversals, split pairs Length Range & Accuracy Up to 500 m (1,640 ft); ±4% or ±2 ft (0.6 m) PoE Detection 802.3AF, 802.3AT, 802.3BT Ports RJ11, RJ45, Coax Display 2.8″ backlit graphical LCD Safety Features 70 VDC input protection; auto power-off Tracer Probe Features NCV detection > 40 V, flashlight, indicators, earphone jack Power Requires 4 × AAA batteries (included) Accessories Included Tracer probe with charging cable, remote adapter, RJ11/RJ45 cables, alligator RJ11 cable, F-to-F adapter, carrying bag Warranty 1-year manufacturer warranty Weight (approximate) ~1.2 lbs Included in the Box LVPRO10 Tester (Remote & Receiver) Tracer probe with charging cable Remote adapter RJ45 and RJ11 adapter cables RJ11 cable with alligator clips F-to-F-connector adapter Four (4) AAA batteries Carrying bag Usage Scenario Example During structured cabling installation in a commercial office, the LVPRO10 simplifies troubleshooting and verification: Trace the intended cable within crowded conduit runs using tone mode and the tracer probe. Validate cable health and length via TDR measurements to ensure run integrity. Detect PoE presence on Ethernet drops to verify power supply capability before equipment install. Confirm port wiring and detect any miswiring, reversals, or split-pair faults in under a minute. Operate in dimly lit junction boxes using the built-in flashlight and get audio feedback through the earphone jack in noisy environments. This single handheld tool reduces job site complexity, expedites diagnostics, and ensures reliable network infrastructure deployment—ideal for technicians, installers, and field service teams.

Read more less