Products

Intellinet 561952 Ultra Long‑Range Outdoor PoE++ Extender Kit Overview The Intellinet 561952 is a high-performance outdoor PoE extension kit designed to dramatically expand the reach of PoE links—up to 1,000 m (3,280 ft)—while maintaining data connectivity and delivering power to downstream devices. This kit includes two modules (one “in” unit and one “out” unit) that must be used together to achieve the maximum range. It supports IEEE 802.3bt (4‑pair PoE, “PoE++”) at the input side (up to 95 W) and provides up to 30 W output for 802.3at-compliant devices, or 15 W for 802.3af devices, depending on length and speed constraints. Its enclosure is rated IP67 for dust and waterproof protection, making it suitable for outdoor or harsh environment deployments. Typical usage includes extending PoE feeds to remote IP cameras, wireless bridges, or access points without needing separate AC power lines. Tri-Tek Electronics is an authorized distributor of Intellinet products and ensures full manufacturer warranty coverage, best pricing, and factory support. Key Features Extends PoE + data up to 1,000 m (3,280 ft) over Cat5e / Cat6 cable Compatible with IEEE 802.3bt (input) and 802.3at / af (output) standards Up to 30 W output at 100 Mbps over moderate distances At lower speeds or longer distances may provide reduced output power (e.g. ~15 W at 10 Mbps) IP67-rated weatherproof housing for outdoor installations No external power supply needed—draws power via PoE on the “in” side Auto-sensing short-circuit / overload / high-voltage protection Plug-and-play installation (no configuration required) Distance vs. Power / Throughput Chart Below is a reference chart indicating how much power (to the powered device, PD) and data rate one might expect at various distances, assuming ideal cable conditions, proper PoE source and minimal losses. Distance (m) Approx Distance (ft) Approx Output Power to PD* Data Rate / Notes 100 m ~328 ft Up to 30 W 100 Mbps link possible 200 m ~656 ft Slightly reduced from 30 W Still 100 Mbps over good cable 300 m ~984 ft ~30 W (ideal conditions) 100 Mbps likely with low-loss cable 500 m ~1,640 ft Lower output May maintain 100 Mbps with quality cable 800 m ~2,625 ft ~15 W Possibly only 10 Mbps 1,000 m ~3,280 ft Minimal Data link may degrade significantly *Output power estimates assume a PoE++ source delivering sufficient input (up to 95 W) and high-quality cabling. Real-world performance will vary based on cable type, terminations, and environmental conditions. Example Installation Scenario A remote IP surveillance camera is located 900 meters (2,950 feet) away from the main network switch. Using the Intellinet 561952 kit, a Cat6 cable is run from a PoE++ switch to the “In” module, and then from the “Out” module to the camera. The extender supports this long-range connection without the need for an AC power source near the camera. Although the data link may reduce to 10 Mbps and power delivery to 15 W, it remains sufficient for many low-power PoE camera models, offering a cost-effective and reliable solution for long-range outdoor deployments. Thanks to the rugged IP67-rated enclosures, both modules can be mounted in pole enclosures or junction boxes without requiring additional environmental protection, making installation simple and durable. Advantages for Installers, Technicians & Integrators Reduced wiring cost: Avoids running separate AC lines in remote areas Extended reach: Supports PoE and data transmission beyond 100 m limits Durability: IP67 weatherproof design ensures longevity in outdoor use Interoperability: Compatible with standard IEEE PoE equipment Ease of Use: No setup or configuration required—plug and deploy

Read more less

Manhattan Computer Products 179935 Ultra Slim Wireless Keyboard Bluetooth 5.0, QWERTY Layout, Black Wireless Keyboard - convenient access to your devices Pairs easily with Bluetooth-enabled devices: tablets, desktops and smartphones Silicone-key system to reduce noise while typing; offers precise keystroke response Sleek, compact design, ideal for small workspaces Use the Manhattan Ultra Slim Wireless Keyboard on your lap, at your desk or anywhere that falls within 33 feet of your Bluetooth® enabled device. The compact design of this wireless keyboard combines all the features you expect in a standard keyboard but takes up 25% less space. The low-profile enclosure comes with crisp, responsive keys. Its function keys let you take advantage of one-touch access to shortcuts such as screen brightness, volume, play/pause and more.The Manhattan Ultra Slim Wireless Keyboard requires just two AAA batteries and is equipped with an intelligent power management system that conserves battery life. When the keyboard is not in use, it will automatically power down. Once you start typing again, it turns back on. When the keyboard is not in use for an extended period of time, use the on/off switch to extend battery life. Specifications: Standards and Certifications CE FCC RoHS WEEE General Bluetooth® version 5.0 78 scissor keys Windows® and Mac® hotkeys Compatible with Windows and Mac OS X and above (except 10.12.26) iOS® and Android™ compatible Electrical Requires 2 AAA batteries Working voltage: 1.8 - 3.3 V Current consumption: 2.3 - 3.6 mA Physical Key cap force: 65 +/– 20 g Total travel: 3.0 +/- 0.3 mm 8,000,000-keystroke switch life, minimum Dimensions: 28.5 x 12 x 1.8 cm (11.2 x 4.7 x 0.7 in.) Weight: 306 g (10.8 oz.) Environment Operating temperature: 0 - 50°C (32 - 122°F) Storage temperature: -10 - 60°C (-14 - 140°F) Operating humidity: 10 - 85% Storage humidity: 10 - 85% Package Contents Ultra Slim Wireless Keyboard Two AAA batteries Quick Instruction Guide > Android is a trademark of Google LLC.

Read more less

SimplifiedMFG RM44C: The Ultimate 4x4 HDMI 2.0b Matrix Switch for Enhanced Video Experiences The RM44C HDMI Matrix Switch is a high-performance, fast-switching 4x4 Matrix that effortlessly routes HDMI signals. It supports video resolutions up to 2160p@60Hz Ultra HD (4:4:4) and a variety of high-resolution audio formats including LPCM7.1, Dolby TrueHD, Dolby Digital Plus, Atmos, and DTS-HD Master Audio. Additionally, it passes HDR High Dynamic Range information (HDR8, 10, 10+, Dolby Vision). Each output offers scaling options for seamless integration with various displays. The built-in CEC control feature enables automated on/off functions for connected displays. The RM44C's features are fully adjustable in the Web GUI, offering both Admin and User login settings. Special Pricing for Contractors/Resellers: Contact us for exclusive rates! Key Features: HDMI2.0, HDCP2.2/HDCP1.4 compliant. Supports video formats up to 4k2k@60Hz with 24bit RGB/YCbCr 4:4:4, YCbCr4:2:2, and up to 4k2k@60Hz with 12bit YCbCr 4:2:0. Built-in Web GUI with Admin and User options. Audio breakout on each output. Built-in CEC editor for display control. Supports a range of video and audio formats, including HDR and Dolby Vision. Smart EDID management. Control via IR Remote Control or on-panel controls. 3-year warranty. Specifications: Frequency Bandwidth: 2.97Gbps. Inputs/Outputs: 4 x HDMI Female. Power Supply: DC 12V, 2.5A. ESD Protection: ± 8kV (air-gap), ± 4kV (contact). Dimensions: 220mm x 105mm x 44mm; Weight: 792g. Operating Temperature: 0°C ~ 40°C; Storage Temperature: -20°C ~ 60°C. Power Consumption: Max 10W / 1.56W Standby.

Read more less

RDL TX-J2 Unbalanced Input Transformer Features: Mix two unbalanced audio signals to mono balanced Combine stereo into mono with balanced output Unbalanced to balanced conversion without gain Hum cancellation on unbalanced line inputs Frequency response 30 Hz to 20 kHz (+/- 1 dB)

Read more less

Hosa Technology PXM-102 Unbalanced Interconnect 1/4" TS to XLR3M Cable The Hosa Technology PXM-102 is a 2-foot unbalanced interconnect cable featuring a 1/4" TS (Tip-Sleeve) male connector on one end and a 3-pin XLR male connector (XLR3M) on the other. This cable is designed for connecting unbalanced audio equipment, such as instruments or line-level sources, to devices with XLR inputs, such as mixers or audio interfaces. The PXM-102 is built with high-quality components to ensure clear signal transmission and durability, making it an excellent choice for both live sound and studio environments. Product Features: Length: 2 feet, ideal for short connections between audio equipment Connector A: 1/4" TS Male (Tip-Sleeve) for unbalanced audio connections Connector B: XLR3M (3-pin XLR Male) for connecting to professional audio equipment Cable Type: Unbalanced, designed for short cable runs where minimal noise and interference are expected Durability: Sturdy construction with molded strain relief for long-lasting performance Application: Perfect for connecting guitars, keyboards, or other unbalanced line-level sources to mixers, audio interfaces, or other XLR-equipped devices Example Installation Scenario The Hosa PXM-102 is perfect for connecting an electric guitar or keyboard with a 1/4" output to a mixing console with an XLR input in a live performance or recording studio setup. Its unbalanced design is suitable for short distances where maintaining signal integrity is crucial, and the 2-foot length is ideal for minimizing cable clutter on stage or in the studio. Tri-Tek Electronics: Your Authorized Distributor Tri-Tek Electronics is proud to be an authorized distributor of Hosa Technology products, including the PXM-102 Unbalanced Interconnect Cable. When you purchase from us, you receive full manufacturer warranty coverage, competitive pricing, and expert factory support. Visit our retail location in Mesa, AZ, to purchase this cable and get advice from our knowledgeable team.

Read more less

Hosa PXF-102 Unbalanced Interconnect Cable – XLR3F to 1/4" TS (2 ft) The Hosa PXF-102 is a professional-grade unbalanced interconnect cable designed to connect equipment with XLR outputs to devices with unbalanced 1/4-inch TS inputs. Ideal for audio professionals, musicians, and technicians, this 2-foot cable ensures reliable signal transmission in various settings, from studio environments to live performances. Key Features: Nickel-Plated Connectors: Provides rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) Conductors: Enhances signal clarity for superior audio quality OFC Spiral Shield: Offers effective EMI and RFI rejection while maintaining flexibility Connector Types: XLR3F to 1/4-inch TS Cable Length: 2 feet Installation Scenario: An audio technician setting up a live sound system can use the Hosa PXF-102 to connect a mixer’s XLR output to an amplifier's unbalanced 1/4-inch TS input. This ensures a clean and reliable signal path, minimizing potential interference and signal degradation. Why Choose Hosa PXF-102: The Hosa PXF-102 is trusted by professionals for its durability and performance. Its high-quality construction ensures consistent audio transmission, making it a valuable addition to any audio setup. Authorized Distributor: Tri-Tek Electronics is an authorized distributor of Hosa Technology products. Purchasing from Tri-Tek ensures full manufacturer warranty coverage, competitive pricing, and dedicated factory support. Visit our retail location in Mesa, Arizona, for personalized service and expert advice.

Read more less

Tri-Tek CST125 6" Compact Plastic Bracket Indoor Camera Mount – Closeout Special The Uniview 6" Compact Plastic Bracket Indoor Camera Mount is a reliable and compact mounting solution for indoor surveillance cameras. Designed for professional installations, this plastic bracket provides a sturdy and lightweight mount suitable for small to medium-sized cameras. Its compact size ensures easy installation in various indoor environments, making it ideal for offices, retail, and residential setups. As a Closeout Special, pricing and availability are limited to stock on hand. Key Features: Compact Design: Perfect for indoor installations with limited space. Durable Plastic Construction: Lightweight yet sturdy. Universal Mount: Compatible with most indoor cameras. Quick and Easy Installation: Simple mounting for professional results. Installation Scenario: A security installer working in a retail store needs a discreet and compact camera mount. The Uniview 6" bracket provides an easy-to-install solution, allowing quick setup in high-traffic areas without occupying much space. Tri-Tek Electronics Advantage: Tri-Tek Electronics offers this Closeout Special with limited stock, providing factory-direct pricing. All sales are final and limited to existing inventory.

Read more less

Radio Design Labs STP-1, Universal Audio Attenuators - 2 Channel The Radio Design Labs STP-1 is a two-channel universal audio attenuator designed to provide precise audio level adjustment. It's equipped with multi-turn trimmers, allowing for fine-tuning without external resistors or jumpers. The STP-1 can operate in high or low impedance, and balanced or unbalanced circuits, making it versatile for various audio setups. It's designed to be cost-effective and eliminates the need for assembling fixed pads. Its connections are designed for easy installation, accepting 14 to 24 gauge wire through a terminal block. For more details, you can visit their product page here.

Read more less

Intelix AVO-CLIP-F, Universal AVO Balun Rackmounting Clip   The Intelix AVO-CLIP-F allows Intelix AvoCat Series and Classic Series baluns to be mounted on a 19 rack tray, standard 35 mm DIN rail, or any other screw-mountable surface. Each AVO-CLIP-F contains a universal mounting bracket, DIN rail converter clip, two mounting screws, and four fasteners.    

Read more less

Jonard Tools CT-200, Universal Compression Tool The Jonard Tools Universal Compression Tool is designed for use on F connectors, BNC connectors, and RCA connectors. The tool is ideal for installing CATV and CCTV network cables and features the following: Dual-head and adjustment dial to accommodate various connectors such as RG6 and RG11 quickly and easily (BNC connectors must be at least 1.5” in length) Guide rule on side of tool to facilitate tool adjustments Made of durable high carbon steel with a black oxide finish Plastic grips provide a comfortable and ergonomic experience Compatible Connectors: PPC: CMP6, CMP6Q, CMP59Q, CMP11, EX6XL, EX59XL, EX59XLHE, EX6XLW9, EX6LP, EX7, EX7N716, EX11, EX11N716, EX320QR, EX320N716, EX6/59, EX6W8, EX59HE, EX6P, EX11N716PLPLUS, CMPRCA6, EXBNC6, EXBNC9167 Thomas & Betts Belden Snap-N-Seal: SNS1P6RMBL, SNS1P6RMBK, SNS1P6RMY, SNS1P6RMR, SNS1P6RMW, SNS1P6RMG Digicon: DS6, DS59, DS59Q, DS11, DS7 Corning Gilbert UltraEase: GF-UE-59, GF-UE-59Q, GF-UE-6, GF-UE-6Q, GF-UE-5.1, RCA-UE, BNC-UE, G-BNCF-FM, GA-BNC-UR-59 HEC, GF-UR-6, GF-UR-59, GAF-UR-11 MH, GF-URS-59 Times Fiber Communications: TFC-QC2-06-3, TFC-QC2-06Q-3, TFC-QC2-06U-3, TFC-QC2K-06-3, TFC-QC2T-06Q-3, TFC-QC2T-06U-3,TFC-QC2Q5-06U-3, TFC-QC2-59-3, TFC-QC2-59Q-3, TFC-QC2K-59-3, TFC-QC2K-59Q-3, TFC-QC2H-59-3, TFC-QC2-11U-3 Cablecon: CX3-F596, CX3-IECF,FM-RG11-CX3, FM-RG7-CX3, FM-56-CX3 3.9, FM-59-CX3 3.7, BNC CX3, F-CX3 Plus many other brands and styles of F, RCA, and BNC connectors!   Connector Type F Short, F Long, BNC, RCA Features U-Shaped Handle, Dual Head and Adjustment Dial Material Carbon Steel Length 6-3/4" (171mm) Weight 1.026 lbs UPC No. 811490012035

Read more less