Products

NTE 54-635, SPST, NO for Closed Loop System, Plunger Switch Contact Rating: 10 W/VA Contact Resistance:   150 milliohms   Contact Material: Ruthenium Oxide over Palladium Switching Voltage: 200 VDC Max Switching Current: 500mA Max Insulation Resistance: 10 Gig ohms Shock Resistance:   30G for 11mS   Vibration Resistance: 20G (10 to 1000Hz) Life Expectancy: 20,000,000 cycles (resistive load, 12VDC, 250mA) Operating Gap:   Terminal Type: Wire Leads Mounting Hole: .375" (9mm) Actuator: Magnet  Download the NTE Spec Sheet (.pdf)

Read more less

Philmore Mfg. 30-17072, SPST, Non Mercury Tilt Switch Current Rating: .5A @ 24V AC Tilt Angle: 15deg Insulation Resistance:   Dielectric Strength:   Contact Material:   Terminal Material:   Terminal Type: .35" Leads Action Normally open or closed. Dependent upon tilt angle. Actuator   Mounting Hole:  

Read more less

NTE 54-629, SPST, Normal Open for Closed Loop System, Reed Switch Contact Rating: 10W/VA Contact Resistance: 150 milliohms Contact Material: Ruthenium Oxide over Palladium Switching Voltage: 200 VDC max. Switching Current: 500mA max. Insulation Resistance: 10 Gig ohms Shock Resistance: 30G for 11mS Vibration Resistance: 20G (10 to 1000Hz) Life Expectancy: 20,000,000 cycles (resistive load, 12VDC, 250mA) Operating Gap: .748” (19mm) min. Terminal Type: Wire Leads Mounting Hole: .375” (9mm) Actuator: Magnet  Download the NTE Spec Sheet (.pdf)  

Read more less

Philmore Mfg. 30-2293, SPST, OFF-(ON), Miniature Push Button Switch Current Rating: 3A@ 125V AC, 1A @ 250V AC Initial Contact Resistance: DC 2.5V-1A, 20 Meg ohm (Max) Insulation Resistance: 500V DC 100 Meg ohm (Min) Dielectric Strength: 1500V AC for 1 minute Contact Material: Brass - Silver Plate Terminal Material: Brass - Silver Plate Terminal Type: Solder Action OFF-(ON) Actuator Red Nylon Mounting Hole: 0.406"

Read more less

Philmore Mfg. 30‑14411 SPST OFF‑(ON) Printed‑Circuit Tactile Switch, 2/Pkg. Product Features & Specifications Switch Type: SPST (Single‑Pole Single‑Throw), momentary action—OFF‑(ON), normally open Electrical Rating: 50 mA @ 125 V AC Initial Contact Resistance: Maximum 100 Megohms Insulation Resistance: Minimum 100 Megohms @ 500 VDC Dielectric Strength: 250 V AC for 1 minute Contact Material: Phosphor Bronze with Silver Cladding Terminal Material: Brass with Silver Cladding Housing Dimensions: 6 mm × 6 mm footprint, 4.5 mm height Mounting Style: Through-hole PCB mount Packaging: sold in 2-pack configuration, contact us for bulk pricing Example Usage Scenario Designed for reliability and ease of installation, the Philmore 30‑14411 tactile switch is ideal for technicians, engineers, and electronics hobbyists working on low-current control systems, test boards, and compact user interfaces. Its momentary OFF‑(ON) action provides a clear tactile response for use in reset circuits, user input points, and embedded device controls. Tri‑Tek Electronics is an authorized distributor of Philmore products. We ensure full manufacturer warranty coverage, factory support, and the best local pricing. Visit our retail location in Mesa, AZ to purchase in person or for expert guidance. We proudly serve Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, and Glendale.

Read more less

Philmore Mfg. 30-10066, SPST. OFF-(ON), Square Push Button Switch, Red Current Rating: 3A@ 125V AC/28V DC, 1A@ 250V AC Initial Contact Resistance: DC 2.5V-1A, 20 Meg ohm (Max.) Insulation Resistance: 500V DC 100 Meg ohm (Min.) Dielectric Strength: 1500V AC for 1 Minute Contact Material: Brass - Silver Plate Terminal Material: Brass - Silver Plate Terminal Type: Solder  Action OFF-(ON) Momentary Normally Open  Actuator Red Nylon Mounting Hole: 0.50"                    

Read more less

Philmore Mfg. 30-10060, SPST, OFF-ON, Round Push Button Switch Current Rating: 3A @ 125V AC, 1A @ 250V AC Initial Contact Resistance: DC 2.5-1A, 20 Meg ohm (Max.) Insulation Resistance: 500V DC 100 Meg ohm (Min.) Dielectric Strength: 1500V AC for 1 minute. Contact Material: Brass - Silver Plate Terminal Material: Brass - Silver Plate Terminal Type: Solder  Action OFF-ON  Actuator Black Nylon Mounting Hole:  0.50"        

Read more less

Philmore Mfg. 30-830 SPST Lighted Mini Push Button Switch The Philmore Mfg. 30-830 is a high-quality single-pole single-throw (SPST) lighted mini push button switch designed for ON-OFF operations. This versatile switch is perfect for a wide range of applications, offering a reliable and efficient solution with a red illuminated actuator. Features Current Ratings: 12A @ 125-250V AC 85°C 10A @ 28V DC Horsepower Ratings: 1/2HP @ 125V AC 1HP @ 250V AC Certifications: UL E45221 CSA LR10990 VDE 10032 Contact Ratings: 12A @ 125-250V AC 12 (2)A @ 250V AC T125 6 (6)A @ 250V AC T105 5E4 (50K Operations) The switch is constructed with a durable Nylon 6.6 body and a polycarbonate rocker for the lighted version. It features a 3mm (.118) contact gap and silver alloy contacts, ensuring excellent conductivity and long-lasting performance. The amber lens button adds to its user-friendly design. Specifications Specification Details Design SPST, ON-OFF Current Ratings 12A @ 125-250V AC 85°C, 10A @ 28V DC Horsepower Ratings 1/2HP @ 125V AC, 1HP @ 250V AC Certifications UL E45221, CSA LR10990, VDE 10032 Contact Ratings 12A @ 125-250V AC, 12 (2)A @ 250V AC T125, 6 (6)A @ 250V AC T105 5E4 (50K Operations) Body Material Nylon 6.6 Rocker Material Opaque: Nylon 6.6, Lighted: Polycarbonate Contact Material Silver Alloy Contact Gap 3mm (.118) Actuator Amber Lens Button Mounting Hole Snap-In Example Installation Scenario The Philmore 30-830 switch is ideal for electronic control panels in automotive and industrial applications. The red light indicator provides clear visual feedback, ensuring easy operation and status monitoring. Its robust construction and versatile ratings make it suitable for both high and low voltage applications. Important Note The built-in light bulb of this switch must be connected to 12 volts AC or DC. The 125-250 volt rating applies only to the switch contacts, not to the light. Disclaimer Tri-Tek Electronics is an authorized distributor of Philmore products, ensuring full manufacturer warranty coverage, best pricing, and factory support.

Read more less

Philmore Mfg. 30-550 SPST Lighted Snap-In Rocker Switch The Philmore Mfg. 30-550 is a robust and reliable single-pole single-throw (SPST) lighted snap-in rocker switch designed for ON-OFF operations. Ideal for a wide range of applications, this switch is equipped with a red illuminated actuator and offers excellent performance with high current ratings and durable materials. Features Current Ratings: 20A @ 12V DC 15A @ 125-250V AC T85 16A @ 125V AC (Res) 16 (4)A @ 250V AC T85 20A @ 28V DC Horsepower Ratings: 1/2HP @ 125V AC 1HP @ 250V AC Certifications: UL E45221 CSA LR10990 VDE 45152 The switch is made from high-quality materials, including a Nylon 6.6 body and silver alloy contacts. It features a polycarbonate red lens for the actuator and a micro action ON-OFF mechanism. The built-in light requires a 12V AC or DC connection, ensuring clear indication of the switch status. Specifications Specification Details Design SPST, ON-OFF Current Ratings 20A @ 12V DC, 15A @ 125-250V AC T85, 16A @ 125V AC (Res), 16 (4)A @ 250V AC T85, 20A @ 28V DC Horsepower Ratings 1/2HP @ 125V AC, 1HP @ 250V AC Certifications UL E45221, CSA LR10990, VDE 45152 Body Material Nylon 6.6 Contact Material Silver Alloy Actuator Red lens - Polycarbonate Mounting Hole Snap-In Contact Gap Micro Action ON-OFF Example Installation Scenario The Philmore 30-550 switch is perfect for automotive applications where a lighted switch is needed to indicate power status clearly. It can also be used in industrial equipment and household appliances, providing reliable performance and easy installation. Important Note The built-in light bulb of this switch must be connected to 12 volts AC or DC. The 125-250 volt rating applies only to the switch contacts, not to the light. Tri-Tek Electronics is an authorized distributor of Philmore products, ensuring full manufacturer warranty coverage, best pricing, and factory support.

Read more less

SPST. ON-OFF, 5a Miniature Toggle Switch   Current Rating: 5A 120V AC/28V DC 2A 250V AC Initial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.) Dielectric Strength: 1000V RMS @ Sea Level Body Material:   Terminal Material: Brass - Silver Plate Terminal Type: Solder  Action ON-OFF  Actuator Metal Mounting Hole: 0.250"

Read more less

Philmore 30-836 SPST ON-OFF Amber Lighted Mini Push Button Switch Overview: Tri-Tek Electronics is an authorized distributor of Philmore products, ensuring full manufacturer warranty coverage, best pricing, and factory support. The Philmore 30-836 Mini Push Button Switch is a Single Pole Single Throw (SPST) switch designed for high durability and reliable performance. It features an ON-OFF operation with an amber light indicator, making it suitable for a wide range of electrical applications. Features and Specifications: Type: Mini Push Button Switch Operation: ON-OFF Light Indicator: Amber Lens Current Rating: 12A @ 125-250V AC (UL E45221) 1/2 HP @ 125V AC 1 HP @ 250V AC 12A @ 125-250V AC (CSA - LR10990) 6 (6)A @ 250V AC T105 (VDE 10032) Contact Gap: 3mm (.118) Contact Material: Silver Alloy Body Material: Nylon 6.6 Actuator Material: Polycarbonate with Amber Lens Light Bulb Voltage: 12V AC or DC (Note: Light bulb must be connected to 12V, not 125V) Approvals and Compliance: UL E45221 CSA LR10990 VDE 10032 Example Installation Scenario: This amber lighted mini push button switch is ideal for use in household appliances, power tools, and other electrical devices where a reliable ON-OFF control with visual feedback is essential. The amber lens provides a clear visual indication of the switch's status, ensuring user-friendly operation. The durable nylon 6.6 body and polycarbonate actuator offer excellent resistance to wear and environmental factors. Value for Installers and Technicians: For installers and technicians, the Philmore 30-836 switch offers reliability and ease of installation. The clear ON-OFF operation with a light indicator ensures straightforward usage, and its high current rating allows it to handle various demanding applications. The switch's robust construction and high-quality materials ensure long-term durability and performance.

Read more less

Philmore Mfg. 30-9851 SPST ON-OFF Heavy Duty Inline Rocker Switch The Philmore Mfg. 30-9851 is a robust SPST (Single Pole Single Throw) ON-OFF inline rocker switch designed for heavy-duty applications. It is ideal for use with a variety of flat and round flexible cords, making it a versatile choice for numerous applications. With its durable construction and easy installation, this switch is a perfect solution for hobbyists, technicians, and manufacturers who require a reliable and user-friendly inline switch for their projects. Features SPST Configuration: Provides a simple ON-OFF function, perfect for controlling a single circuit. Heavy Duty Design: Built to handle demanding environments and ensure long-term reliability. Versatile Cord Compatibility: Suitable for multiple types of flat and round cords. User-Friendly Installation: Includes two screw terminals for secure and straightforward wire connections. Durable Actuator: Features a black rocker actuator with a white legend for clear visibility and ease of use. Specifications Manufacturer: Philmore Manufacturing Part Number: 30-9851 Switch Type: SPST (Single Pole Single Throw) Operation: ON-OFF Current Rating: 10A @ 125VAC Initial Contact Resistance: (Data not provided) Insulation Resistance: (Data not provided) Dielectric Strength: 300V Body Material: (Data not provided) Terminal Material: Brass Terminal Type: Screw Actuator Material: Black plastic with white legend Cord Compatibility: Flat Cords: 18/2, 16/2, SPT-1, SPT-2, and HPM Round Cords: 18/2 type SVT, up to 9/32" O.D. (Outside Diameter) Installation Instructions The Philmore 30-9851 inline rocker switch is designed for quick and easy installation on various types of flexible cords. Follow these steps for installation: Select the Cord: Choose a compatible cord, such as 18/2 or 16/2 flat cord, or 18/2 round cord type SVT with an outer diameter of up to 9/32". Prepare the Cord: Cut one wire and strip the ends, leaving the other wire intact to pass through the switch. Open the Switch Housing: Remove the cover of the switch to expose the screw terminals inside. Connect the Wires: Attach the stripped ends of the cut wire to the screw terminals and tighten the screws to secure the connections. Close the Switch Housing: Replace the cover and ensure it is securely fastened. Applications The Philmore Mfg. 30-9851 inline rocker switch is versatile and suitable for a wide range of applications, including: DIY Electronics Projects: Ideal for hobbyists requiring a durable inline switch for custom electronic setups. Home Appliances: Suitable for controlling small household devices like lamps, fans, and kitchen appliances. Workshop Tools: Perfect for adding ON-OFF control to power tools and other workshop equipment. Outdoor Equipment: Reliable for use in outdoor applications where a robust switch is needed. Example Installation Scenario In a home workshop, the Philmore 30-9851 inline rocker switch can be used to control a power strip for tools. By installing the switch on a compatible cord, such as an 18/2 type SVT round cord, users can easily turn the power strip on and off without unplugging it, enhancing safety and convenience. Why Choose Tri-Tek Express? Tri-Tek Express is an authorized distributor of Philmore products, ensuring you receive genuine Philmore 30-9851 inline rocker switches with full manufacturer warranty coverage. We are dedicated to offering competitive pricing and superior support, making us your trusted source for high-quality electronic components.

Read more less