Welcome to Tri-Tek Electronics

Self-Fusing Silcon Rubber Tape 1"x10' Yellow

Philmore 12-3414 Self-Fusing Silicone Rubber Tape 1"x10' Yellow

The Philmore 12-3414 Self-Fusing Silicone Rubber Tape is a high-performance, adhesive-free sealing and insulating tape, ideal for electrical insulation, plumbing repairs, and automotive applications. This 1-inch wide, 10-foot long yellow silicone tape bonds to itself, creating a durable, waterproof, and airtight seal. Its high-temperature resistance and superior dielectric strength make it perfect for professional and DIY use.

Features & Benefits:

  • Self-Fusing: Bonds to itself upon contact, eliminating the need for adhesives.
  • Wide Temperature Range: Operates from -65°F to 500°F, suitable for extreme environments.
  • Superior Electrical Insulation: Insulates up to 8000 volts per layer, ideal for wiring and electrical applications.
  • Weather & Chemical Resistant: Resists UV, oil, and chemicals, ensuring long-term durability.
  • Strong & Durable: Features a 700 PSI tensile strength and 85 PSI tear resistance.
  • Flexible & Easy to Apply: Conforms to irregular surfaces and shapes, ensuring a secure seal.

Applications:

The Philmore 12-3414 Self-Fusing Silicone Rubber Tape is perfect for electrical insulation, wire bundling, plumbing repairs, automotive maintenance, and emergency sealing. It is widely used in HVAC, marine, aerospace, and industrial settings where high-temperature and high-voltage insulation is required.

Example Installation Scenario:

An electrician can use the yellow Philmore 12-3414 tape to insulate and mark high-voltage wiring in an electrical panel, preventing accidental contact. A mechanic can use it to seal exposed wires in an engine compartment, ensuring protection against heat, moisture, and contaminants.

Authorized Distributor:

Tri-Tek Electronics, located in Mesa, AZ, is an authorized distributor of Philmore products. Purchasing from Tri-Tek ensures full manufacturer warranty coverage, competitive pricing, and access to factory support.

Specifications:

  • Part Number: 12-3414
  • Material: Silicone Rubber
  • Color: Yellow
  • Width: 1 inch
  • Length: 10 feet
  • Thickness: 0.020 inches
  • Operating Temperature Range: -65°F to 500°F
  • Dielectric Constant @ 1KHz: 2.95
  • Dielectric Strength: 300 volts/mil (tested to ASTM D-149, when stretched/layered to 0.040" thickness)
  • Volume Resistivity: 3x10¹² Ohm/cm (tested to ASTM D-257)
  • Tensile Strength: 700 PSI (tested to ASTM D-412)
  • Tear Resistance: 85 PSI
  • Hardness: 50 Shore Durometer
  • Resists: UV, Oil, and Chemicals
  • Insulates: 8000 Volts per layer
Product form

Philmore 12-3414 Self-Fusing Silicone Rubber Tape 1"x10' Yellow The Philmore 12-3414 Self-Fusing Silicone Rubber Tape is a high-performance, adhesive-free sealing... Read more

Free local pickup in our store

SKU: PHI12-3414
UPC: 0038975234144

2 in stock

$8.49

    • Shipped today? Order within: Mar 31, 2025 14:00:00 -0700

    Philmore 12-3414 Self-Fusing Silicone Rubber Tape 1"x10' Yellow

    The Philmore 12-3414 Self-Fusing Silicone Rubber Tape is a high-performance, adhesive-free sealing and insulating tape, ideal for electrical insulation, plumbing repairs, and automotive applications. This 1-inch wide, 10-foot long yellow silicone tape bonds to itself, creating a durable, waterproof, and airtight seal. Its high-temperature resistance and superior dielectric strength make it perfect for professional and DIY use.

    Features & Benefits:

    • Self-Fusing: Bonds to itself upon contact, eliminating the need for adhesives.
    • Wide Temperature Range: Operates from -65°F to 500°F, suitable for extreme environments.
    • Superior Electrical Insulation: Insulates up to 8000 volts per layer, ideal for wiring and electrical applications.
    • Weather & Chemical Resistant: Resists UV, oil, and chemicals, ensuring long-term durability.
    • Strong & Durable: Features a 700 PSI tensile strength and 85 PSI tear resistance.
    • Flexible & Easy to Apply: Conforms to irregular surfaces and shapes, ensuring a secure seal.

    Applications:

    The Philmore 12-3414 Self-Fusing Silicone Rubber Tape is perfect for electrical insulation, wire bundling, plumbing repairs, automotive maintenance, and emergency sealing. It is widely used in HVAC, marine, aerospace, and industrial settings where high-temperature and high-voltage insulation is required.

    Example Installation Scenario:

    An electrician can use the yellow Philmore 12-3414 tape to insulate and mark high-voltage wiring in an electrical panel, preventing accidental contact. A mechanic can use it to seal exposed wires in an engine compartment, ensuring protection against heat, moisture, and contaminants.

    Authorized Distributor:

    Tri-Tek Electronics, located in Mesa, AZ, is an authorized distributor of Philmore products. Purchasing from Tri-Tek ensures full manufacturer warranty coverage, competitive pricing, and access to factory support.

    Specifications:

    • Part Number: 12-3414
    • Material: Silicone Rubber
    • Color: Yellow
    • Width: 1 inch
    • Length: 10 feet
    • Thickness: 0.020 inches
    • Operating Temperature Range: -65°F to 500°F
    • Dielectric Constant @ 1KHz: 2.95
    • Dielectric Strength: 300 volts/mil (tested to ASTM D-149, when stretched/layered to 0.040" thickness)
    • Volume Resistivity: 3x10¹² Ohm/cm (tested to ASTM D-257)
    • Tensile Strength: 700 PSI (tested to ASTM D-412)
    • Tear Resistance: 85 PSI
    • Hardness: 50 Shore Durometer
    • Resists: UV, Oil, and Chemicals
    • Insulates: 8000 Volts per layer

    Recently viewed products

    © 2025 Tri-Tek Electronics, Powered by Shopify

      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account