Cutting and Stripping

Vertical Cable 078-2153/B Replacement Blade for Feed-Thru Crimper  Replacement Blade for EZ Feed Crimping Tool (078-2152/EZC and 078-2154/EZC/S)

Read more less

Platinum tools Replacement blade specifically for the EXO-EX Die™. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand. Replacing blade improves the prefomance of your termination Compatible with EXO-EX Die™ only

Read more less

Platinum Tools 100071C EXO-EX Die for EXO Crimp Frame Used with the EXO Crimp Frame™ to terminate ezEX-RJ45™connectors (typically used in Cat6 and Cat6A). The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45™connectors (ezEX™44 and ezEX™48).  Single cycle crimp and flush trim Easily interchangeable Reversible for ambidextrous operation Connectors lock into tool for correct positioning during crimp Compatible with ezEX™44 and ezEX™48 connectors Terminates larger cables and conductors Cat6 and Cat6A U.S. Patent No. 10,490,963 B2. Foreign patents.

Read more less

Jonard Tools AHC-19 Adjustable Round Hole Cutter w/ Vacuum Port, 9" Designed for cutting round holes in ceilings, walls, and floors without making a mess, the AHC-19 is the perfect tool for installing recessed speakers, lighting, or other round objects. This adjustable hole cutter features the following: Can be hooked up to vacuums, with 2.5" (63.5 mm) diameter hose nozzles, to suck up debris as you go Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (27 mm) thick Cutting depth is adjustable via hex locknut and compression spring Cuts hole sizes from 2.2" to 9" (56 mm - 228.6 mm) in diameter Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris Compression spring absorbs vibrations while cutting Can be used with any variable-speed drill Power drill and vacuum not included with hole cutter Product Includes:1 Cover, 1 Adjustable Hole Cutter, 1 Vacuum Port, 1 Cap, 1 Nut, 1 Set of Replacement Blades, 1 Hex Key, and a Rugged Carry Case   Cut Type Round Hole Works On Plywood, Sheetrock, Plasterboard, Acrylic Sheet Cutting Diameter Range 2.2"- 9" (56 mm-228.6 mm) Vacuum Port Size 2.5" (63.5 mm) Maximum Cutting Depth 1.1" (27 mm) Bit Diameter 0.236” (6.0 mm) Bit Length 2.17” (55 mm) Bit Material Steel Hex Chuck Size/Arbor Size 3/8" (9.53 mm) Dimensions 13" x 4.50" x 13" (33 cm x 33 cm x 11.4 cm) Product Material Steel Weight 6.28 lb (2851.12 g)

Read more less

- The Jonard Tools TK-85 COAX Tool Kit is a must-have for CATV technicians, offering a comprehensive solution for repair and maintenance of CATV cable networks. - The CT-200 Universal Compression Tool included in this kit ensures precise and reliable compression connections for RG59, RG6, RG7, and RG11 cables, saving you time and effort. - With the UST-125 COAX Stripping Tool, you can easily strip RG59, RG6, RG7, and RG11 cables, ensuring clean and accurate cuts every time. Introducing the Jonard Tools TK-85 COAX Tool Kit – the ultimate solution for CATV technicians, installation professionals, and IT support persons. This comprehensive kit is designed to streamline the repair and maintenance of CATV cable networks, ensuring efficient and high-quality results every time. At the heart of the TK-85 COAX Tool Kit is the CT-200 Universal Compression Tool. Engineered with precision and durability in mind, this tool guarantees reliable compression connections for RG59, RG6, RG7, and RG11 cables. Say goodbye to time-consuming and unreliable connections – the CT-200 ensures a perfect fit, saving you valuable time and effort. To further enhance your efficiency, the TK-85 includes the UST-125 COAX Stripping Tool. With its ability to strip RG59, RG6, RG7, and RG11 cables, this tool ensures clean and accurate cuts, eliminating the risk of damage and signal loss. Experience the confidence that comes with precise cable preparation. But that's not all. The TK-85 COAX Tool Kit also features the PT-300 Pocket Continuity Tester & Toner with Voltage Detection. This compact and versatile tool allows you to quickly identify cables, test continuity, and detect voltage presence. It's a true game-changer for troubleshooting and maintenance tasks. With the JIC-2288 High Leverage Diagonal Cutting Pliers and the TWAF-71630 F Connector Torque Wrench, you have all the additional tools needed for a seamless installation experience. And with the H-85 Molded 7 Pocket Tool Pouch, you can keep your tools organized and easily accessible on the job. Invest in the Jonard Tools TK-85 COAX Tool Kit and elevate your CATV cable repair and maintenance game. Experience the efficiency, precision, and quality that only Jonard Tools can deliver. Upgrade your toolbox today and take your professionalism to new heights.

Read more less

Eclipse Tools 200-069 10" Cable Cutters Application: solid/ AWG 4, stranded/ AWG 2, flexible/ AWG 00 and aluminum cable – stranded/ AWG 00 Material: mild steel HRC body: 45°±3°, cutting edge: 60°±5° High leverage jaw Shear cut blades Plastic coated handle Not for use on steel or ACSR Overall length: 9.3"

Read more less

Steren HER-040 Coaxial Cable Stripper for RG58, RG59, RG6 & RG62 The Steren HER-040 is a compact, installer-friendly coaxial cable stripping tool designed for fast and accurate jacket and dielectric removal on the most common coax types used in CCTV, satellite, CATV, and RF installations. Its preset blade geometry allows technicians to achieve clean, repeatable strip lengths without damaging the center conductor or shield. Tri-Tek Electronics is an authorized distributor of Steren products, ensuring full manufacturer warranty coverage, factory support, and reliable local availability. Product Features Designed for RG58, RG59, RG6, and RG62 coaxial cables Dual-blade design strips jacket and dielectric in one operation Preset cutting depth reduces risk of conductor damage Compact, lightweight design for tool pouches and service kits Easy-to-use rotary action for fast terminations Ideal for CCTV, CATV, satellite, and RF cable prep Specifications Manufacturer Part Number: HER-040 Tool Type: Coaxial Cable Stripper Supported Cable Types: RG58, RG59, RG6, RG62 Operation: Manual rotary stripping Application: Coax cable jacket and dielectric removal Typical Applications Preparing coax for BNC, F-type, and RCA connectors CCTV and security camera installations Satellite and CATV service work RF and low-voltage coaxial cabling projects Installation & Use Case Example For low-voltage installers terminating RG59 or RG6 coax in the field, the HER-040 allows quick and consistent cable preparation prior to connector installation. The preset blades help maintain proper strip dimensions, improving connector fit and reducing rework or signal issues. Why Buy from Tri-Tek Electronics? Tri-Tek Electronics supports installers, technicians, and hobbyists with trusted tools and expert advice. With a retail location in Mesa, AZ, Tri-Tek serves Phoenix, Chandler, Tempe, Gilbert, Scottsdale, Glendale, and surrounding Arizona communities with fast local pickup and knowledgeable service.

Read more less