CATV and Satellite Installation Tools
Jonard F Connector Torque Wrench, Speed Head 7/16", 30 in-lb
Jonard Tools TWAS-71630 F Connector Torque Wrench, Speed Head 7/16", 30 in-lb Designed for 7/16" F connectors, this speed head torque wrench skips over the corners of nuts and bolts so no repositioning of the tool is required. This torque wrench features the following: Provides a snug fit when used on 7/16" F Connectors Acts like a ratcheting wrench to allow continuous turning of nuts and bolts Ergonomically designed with an angled head and cushioned grip for maximum leverage and comfort Calibrated to 30 in-lb (3.39 N-m) to consistently meet most manufacturers' recommended torque requirements for their F connectors Audible click indicates when the connector is fully torqued to 30 in-lb Made of high carbon steel with a black oxide finish for maximum durability Lifetime Warranty Head Type Speed Head Torque 30 in-lb (3.39 N-m) Size 7/16" (11.11 mm) Head Angle 15 degrees Material High Carbon Alloy Steel Finish Black Oxide Handle Type Ergonomic Cushion Grip Handle Color Blue Length 6 1/2" (165.1 mm) Weight 0.35 lb (158.76 g)
$37.19 $33.95
Jonard Pocket Continuity Tester and Toner
Jonard Tools PT-300 Pocket Continuity Tester and Toner Designed to identify cables in an MDU and detect troublesome short circuits, this pocket continuity tester and toner is perfect for testing cables up to 5,000 ft (1,500 m) on the go. This tester features the following: Loud tone identifies line carrying signal LED light indicates splitters, DC shorts, and other self-grounding devices in cable Manual ON/OFF switch preserves battery life Voltage protected up to 52V Right angle male push-on connector is ideal for working in confined areas Female push-on connector is perfect for speed toning Accurate up to 5,000 feet (1,500 m) Connect the toner without emitting a tone under discretion Includes (1) AAA 1.5V battery and (1) pocket clip
$29.19 $27.95
Jonard BNC Connector Tool, 12"
• Designed specifically for easy access to BNC connectors in high-density locations • 12" overall length allows for reaching BNC connectors in hard-to-reach places • Ergonomically designed handle provides increased comfort and leverage Introducing the Jonard Tools RBNC-12 BNC Connector Tool, the ultimate solution for technicians, installation professionals, and IT support persons. This 12" BNC Connector Tool is expertly designed to provide easy access to BNC connectors, making it perfect for installing or removing connectors in high-density locations. With its 12" overall length, this tool allows you to effortlessly reach BNC connectors in even the most hard-to-reach places. No more struggling with cramped spaces or awkward angles. The extended length provides the flexibility and convenience you need to get the job done efficiently. But it's not just about length. The RBNC-12 is also equipped with an ergonomically designed handle, ensuring increased comfort and leverage during use. Say goodbye to hand fatigue and hello to a more comfortable and efficient working experience. Crafted from high-quality materials, this BNC Connector Tool is built to last. Its durability and long life guarantee that it will withstand the demands of any professional setting. Trust in the Jonard Tools brand for reliable and top-notch quality. Upgrade your toolkit with the Jonard Tools RBNC-12 BNC Connector Tool. Experience the efficiency and convenience of easy access to BNC connectors, the comfort of an ergonomically designed handle, and the durability of high-quality materials. Get the job done right, every time.
$14.89 $13.95
Jonard Cable Splicer's Kit
Jonard Tools TK-400 Cable Splicer's Kit Featuring an ergonomic cable splicing knife and electrician’s scissors in a comfortable leather pouch, the TK-400 Splicer’s Kit is the perfect compact tool kit for cable splicing needs. Includes: Jonard ES-1964 Electrician's Scissors Jonard KN-7 Ergonomic Cable Splicing Knife Jonard H-40 Leather 2 Pocket Tool Pouch Skinning Notch 18-20 AWG, 22-24 AWG Material Chrome Vanadium Steel, Cutlery Steel
$36.09 $33.95
Jonard Security Sleeve Tool 7/16-in
Jonard Tools SST-716 Security Sleeve Tool - 7/16-Inch The Jonard Tools SST-716 is a security sleeve tool designed specifically for use with 7/16” hex shielded F connectors, providing a secure and precise fit during installation. This tool is ideal for locking security shields onto connectors using a torque wrench, ensuring accurate torque adjustments for reliable connections. Constructed from machined, heat-treated steel with a black oxide finish, the SST-716 is built for durability and long-lasting performance. Key Features: Compatibility: Designed for use with 7/16” hex shielded F connectors, including SS-1D, EZ-NLS security shields, and NSS Notch-Trap sleeves. Torque Wrench Use: Can be paired with a torque wrench for precise torque adjustments, ensuring secure and reliable installation. Durable Construction: Made from machined, heat-treated steel with a black oxide finish, providing maximum durability and corrosion resistance. Knurled Handle: Features a knurled handle for a secure grip, allowing for better control during use. Steel Loop: Equipped with a steel loop for additional leverage and easy storage, enhancing both convenience and usability. Example Usage Scenario: The SST-716 is perfect for cable technicians working on coaxial networks where secure connections are crucial. For example, when installing cable television systems or broadband internet networks, this tool helps lock security shields in place to prevent tampering while ensuring optimal performance of the F connectors. Specifications: Tool Size: 7/16-inch Material: Heat-treated steel with black oxide finish Handle Type: Knurled for secure gripping Compatibility: SS-1D, EZ-NLS, NSS Notch-Trap sleeves Tri-Tek Electronics in Mesa, AZ, is your local distributor for Jonard Tools, offering full warranty coverage and technical support for the SST-716 and other professional installation tools.
$12.99 $11.95
Telecrafter RB-2 Single Cable Clip Gun for Cat 5e and 4.0mm Fiber
Telecrafter RB-3 Single Cable Clip Gun The Telecrafter RB-3 Single Cable Clip Gun is an essential tool for installers and technicians working with various low voltage cable installations. This rugged and reliable clip gun is designed to efficiently secure single cables to walls, ceilings, and other surfaces, ensuring a clean and professional installation. The RB-3 model is known for its ease of use, durability, and compatibility with a wide range of cable types, making it a versatile addition to any toolkit. Features Unique Cable Fastening System: Ensures perfect, error-free cable installation. This system eliminates staple nicks, pinching, compression, accidental hammer blows, and kinked staples. Durable Construction: Built with high-quality materials to withstand heavy use in various environments. Ergonomic Design: Comfortable grip and easy trigger mechanism reduce hand fatigue during extended use. Versatile Application: Suitable for use with Cat 5 and 4mm Fiber Optic cables. Adjustable Tension: Allows for precise control over clip placement and cable security. Quick Reload Mechanism: Facilitates fast and efficient reloading of cable clips. Specifications Model Number: RB-3 Compatible Cable Types: Cat 5, 4mm Fiber Optic Material: High-strength plastic and metal components Clip Size: Adjustable to fit various cable diameters Weight: Lightweight for easy handling Dimensions: Compact size for convenient storage and transport Unique Cable Fastening System The Telecrafter RB-3 Single Cable Clip Gun features a revolutionary cable fastening system that ensures flawless installations. Two independent nails are driven out of the clip housing, securely holding the cable in place without pinching or deforming. This system is perfect for installing cables onto wooden surfaces, eliminating the risk of staple nicks, compression, and accidental damage from hammer blows. The result is a secure, professional finish every time. Example Installation Scenario The Telecrafter RB-3 Single Cable Clip Gun is ideal for residential and commercial cable installations. For example, an installer working on a home network setup can use the RB-3 to secure Cat 5 cables along baseboards and walls, ensuring a neat and unobtrusive installation. The adjustable tension feature allows the installer to set the right amount of pressure, preventing damage to the cables while keeping them firmly in place. Similarly, when installing 4mm Fiber Optic cables, the RB-3 ensures a precise and secure attachment without compromising the cable integrity. Value for Installers and Technicians The RB-3 Single Cable Clip Gun enhances productivity and ensures a professional finish to cable installations. Its ease of use and reliable performance make it a valuable tool for installers looking to maintain high standards in their work. Additionally, the durable construction of the RB-3 ensures long-term reliability, reducing the need for frequent tool replacements. Authorized Distributor Tri-Tek Electronics is an authorized distributor of the Telecrafter RB-3 Single Cable Clip Gun. We ensure full manufacturer warranty coverage and offer the best pricing and factory support. Trust Tri-Tek Electronics for all your installation tool needs. Product Specifications Table Feature Specification Model Number RB-3 Compatible Cable Types Cat 5e, 4mm Fiber Optic Material High-strength plastic and metal Clip Size Adjustable Weight Lightweight Dimensions Compact
$42.79 $39.95
