Products

Radio Design Labs ST-DA3, Line Level Distribution Amplifier - 1x3 The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wide-band circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known. The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 VDC or bipolar DC power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.   Input: 20 kΩ balanced or unbalanced Input Signal: -15 dBV to +21 dBu (for +4 dBu output) Maximum Input Level: +24 dBu Outputs (3): 150 Ω balanced or 75 Ω unbalanced Output Signal:   Balanced: +4 dBu nominal balanced; Unbalanced: 6 dB below balanced line level Maximum Output Level: +25 dBu Frequency Response: 10 Hz to 100 kHz (+/- 0.05 dB) THD+N: < 0.002% (unity gain) IMD: < 0.003% (unity gain) Noise below +4 dBu: < -98 dB (unity gain) Headroom: > 20 dB (above +4 dBu) Gain: Unity +/- 17 dB (adjustable) CMRR: > 60 dB (50 Hz to 120 Hz) Power Requirement: GROUND-REFERENCED or FLOATING, 24 to 33 Vdc @ 70 mA    

Read more less

RDL TX-LM2 Line Level to Mic Level Transformer Features: Matches balanced 600 Ω phone (or other line) into mic or line input Dual outputs:Unbalanced line-level and balanced mic-level Frequency response: 20 Hz to 20 kHz (+/- 0.5 dB) THD: < 0.05% (1 kHz)

Read more less

Warrior Wrap WW-RSL-15 Linered Rubber Splicing Tape - 1.5" Width The Warrior Wrap WW-RSL-15 Linered Rubber Splicing Tape is a high-performance, self-fusing tape designed for electrical insulation and splicing applications. With a width of 1.5 inches, this tape offers excellent conformability and adhesion, making it ideal for use in a variety of environments and conditions. The linered design ensures easy handling and application, providing superior protection and durability for electrical connections. Tri-Tek Electronics, an authorized distributor of Warrior Wrap products, guarantees full manufacturer warranty coverage, ensuring you receive the best pricing and factory support. Features High Performance: Provides excellent electrical insulation and splicing. Self-Fusing: Creates a solid bond without the need for additional adhesives. Linered Design: Ensures easy handling and application. 1.5-Inch Width: Offers ample coverage and flexibility. Durable Construction: Designed to withstand harsh conditions. Specifications Model Number: WW-RSL-15 Width: 1.5 inches Length: 22 feet Material: Rubber Color: Black Application: Electrical insulation and splicing Temperature Range: -18°C to 90°C (0°F to 194°F) Dielectric Strength: 400 V/mil Example Installation Scenario Consider using the Warrior Wrap WW-RSL-15 Linered Rubber Splicing Tape for insulating a high-voltage cable splice in an industrial setting. The self-fusing property ensures a secure and robust insulation layer, while the 1.5-inch width provides sufficient coverage. The tape’s durability and resistance to environmental factors make it suitable for both indoor and outdoor applications. Value for Installers and Technicians For installers and technicians, the Warrior Wrap WW-RSL-15 is an essential tool for ensuring reliable and safe electrical connections. Its high dielectric strength and self-fusing nature offer superior performance in demanding conditions, making it a go-to choice for professional electrical insulation and splicing tasks. Product Specifications (Reference from NSI Industries) Width: 1.5 inches Length: 22 feet Material: Rubber Color: Black Temperature Range: -18°C to 90°C (0°F to 194°F) Dielectric Strength: 400 V/mil

Read more less

WarriorWrap WW-HR-10 Linerless Rubber Splice Tape, Black, 1" x 30' Tri-Tek Electronics, an authorized distributor of WarriorWrap products, is pleased to offer the WW-HR-10 Linerless Rubber Splice Tape. This high-performance, ethylene propylene rubber (EPR) based tape is designed for high-voltage insulation applications, providing excellent electrical, chemical, and physical properties. For cross-referencing, the WarriorWrap WW-HR-10 is equivalent to 3M Scotch® Linerless Rubber Splicing Tape 130C (3M-130C). Key Features: Self-Bonding and Linerless Design: Facilitates quicker application speeds compared to tapes with liners, ensuring a uniform, void-free build-up. Outstanding Electrical Properties: Provides reliable high-voltage insulation, making it suitable for splicing and terminating cables up to 69 kV. Durable and Resistant: Exhibits excellent resistance to moisture, corrosion, UV radiation, and chemicals, ensuring longevity in various environments. High Thermal Conductivity and Flame Retardant: Effectively dissipates heat and resists flames, operating efficiently within a temperature range of 20°F to 176°F (-7°C to 80°C). Lead-Free Composition: Environmentally friendly, adhering to safety and health standards. Specifications: Material: Ethylene Propylene Rubber (EPR) Color: Black Dimensions: 1 inch width x 30 feet length Thickness: 30 mils (0.76 mm) Operating Temperature: 20°F to 176°F (-7°C to 80°C) Voltage Rating: Suitable for applications up to 69 kV Certifications: Meets industry standards for high-voltage insulating tapes Application & Installation: The WarriorWrap WW-HR-10 is ideal for primary insulation in high-voltage splicing and terminating of solid dielectric insulated cables. Its self-bonding nature allows for rapid application without the need for a liner, ensuring a secure and void-free insulation layer. The tape's flexibility and conformability make it suitable for use in various environments, providing reliable performance in both indoor and outdoor settings. By choosing Tri-Tek Electronics in Mesa, AZ, you are assured of full manufacturer warranty coverage, competitive pricing, and exceptional factory support. Our commitment to quality ensures that professionals in Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, Glendale, and surrounding areas receive top-tier products and support for all their electrical needs.

Read more less

WarriorWrap WW-HR-20 Linerless Rubber Splice Tape, Black, 2" x 30' Tri-Tek Electronics, an authorized distributor of WarriorWrap products, is pleased to offer the WW-HR-20 Linerless Rubber Splice Tape. This high-performance, ethylene propylene rubber (EPR) based tape is designed for insulating and jacketing splices on power cables ranging from 600 volts to 69,000 volts. For cross-referencing, the WarriorWrap WW-HR-20 is equivalent to 3M Scotch® Linerless Rubber Splicing Tape 130C (3M-130C). Key Features: Self-Bonding and Linerless Design: Facilitates quicker application speeds compared to tapes with liners, ensuring a uniform, void-free build-up. Outstanding Electrical Properties: Provides reliable high-voltage insulation, suitable for splicing and terminating cables up to 69 kV. Durable and Resistant: Exhibits excellent resistance to moisture, corrosion, UV radiation, and chemicals, ensuring longevity in various environments. High Thermal Conductivity and Flame Retardant: Effectively dissipates heat and resists flames, operating efficiently within a temperature range of 20°F to 176°F (-7°C to 80°C). Lead-Free Composition: Environmentally friendly, adhering to safety and health standards. Specifications: Material: Ethylene Propylene Rubber (EPR) Color: Black Dimensions: 2 inch width x 30 feet length Thickness: 30 mils (0.76 mm) Operating Temperature: 20°F to 176°F (-7°C to 80°C) Voltage Rating: Suitable for applications up to 69 kV Certifications: Meets industry standards for high-voltage insulating tapes Application & Installation: The WarriorWrap WW-HR-20 is ideal for primary insulation of high-voltage splices and terminations, as well as for building stress cones and jacketing on power cables from 600 volts to 35,000 volts. Its self-bonding nature allows it to conform easily to irregular shapes, ensuring a secure and moisture-resistant seal. By choosing Tri-Tek Electronics in Mesa, AZ, you are assured of full manufacturer warranty coverage, competitive pricing, and exceptional factory support. Our commitment to quality ensures that professionals in Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, Glendale, and surrounding areas receive top-tier products and support for all their electrical needs.

Read more less

MG Chemicals Lint-Free Foam Swabs (813-10) Product Overview The MG Chemicals Lint-Free Foam Swabs (813-10) are precision cleaning tools designed for electronic maintenance. These swabs feature a 100% urethane foam head with 100 PPI porosity, securely bonded to a 6" birch shaft, ensuring durability and effective cleaning. Features and Benefits Lint-Free: Prevents contamination during cleaning. Shred-Resistant: Ensures longevity and reliability. 100% Urethane Foam Head: Provides thorough cleaning with 100 PPI porosity. Strong Birch Shaft: Allows for extra strength when applying pressure. Versatile Applications: Suitable for use on PCBs, electronic equipment, connectors, and office equipment. Technical Specifications Head Material: 100% urethane foam Porosity: 100 PPI Shaft Material: Birch wood Length: 6 inches Application Scenario Perfect for cleaning sensitive electronic components, the 813-10 swabs are ideal for removing dust and residues from PCBs during repair and maintenance, ensuring optimal performance and longevity of the equipment. Why Choose Tri-Tek Electronics? As an authorized distributor of MG Chemicals products, Tri-Tek Electronics ensures full manufacturer warranty coverage, competitive pricing, and factory support, guaranteeing authentic and high-quality products. For more detailed specifications and the product datasheet, please visit MG Chemicals​ (MG Chemicals)​.

Read more less

MG Chemicals 8281-110: Lint-Free Wipes for Electronics Product Overview The MG Chemicals 8281-110 Lint-Free Wipes are designed for critical cleaning tasks in electronics and other sensitive applications where the presence of lint or other contaminants can compromise the integrity of components. These wipes are ideal for cleaning electronic assemblies, precision instruments, optical devices, and other equipment requiring a clean, particle-free environment. The MG 8281-110 wipes are made from a blend of cellulose and polyester, providing a high level of absorbency and durability. They are soft, non-abrasive, and come in a convenient 110-count pack, making them an essential tool for maintaining cleanliness in any high-tech environment. Features Lint-Free: Specially designed to leave no lint or residues on surfaces. High Absorbency: Efficiently absorbs liquids, making it perfect for cleaning spills and applying cleaning solutions. Soft and Non-Abrasive: Safe for use on delicate surfaces without scratching or damage. Durable: Made from a cellulose and polyester blend for strength and durability. Multipurpose Use: Suitable for a variety of applications, including electronics, optics, and laboratory environments. Convenient Packaging: Comes in a 110-count pack for easy dispensing and use. RoHS Compliant: Free from hazardous substances, adhering to environmental and safety standards. Specifications Part Number: 8281-110 Count: 110 wipes per pack Material: Cellulose and polyester blend Wipe Size: 9" x 9" (22.9 cm x 22.9 cm) Color: White Packaging: Resealable bag Country of Origin: Canada Applications The MG 8281-110 Lint-Free Wipes are ideal for various applications including: Electronics Cleaning: Wiping down PCBs, electronic components, and assemblies. Optics Cleaning: Cleaning lenses, mirrors, and other optical devices without leaving residues. Laboratory Use: Suitable for maintaining cleanliness in lab environments. Maintenance of Precision Instruments: Cleaning sensitive equipment in medical, aerospace, and industrial sectors. General Purpose Cleaning: Ideal for any application requiring a lint-free, clean wipe. Example Installation Scenario In an electronics manufacturing setting, the MG 8281-110 Lint-Free Wipes are invaluable for cleaning printed circuit boards (PCBs) before and after soldering. The wipes effectively remove flux residues, dust, and other contaminants without leaving lint or particles behind, ensuring that the PCB remains clean and that solder joints are reliable. This helps to prevent defects and ensures the longevity and performance of electronic products. How to Use Remove Wipe from Package: Open the resealable bag and take out a wipe. Apply Cleaning Solution: If needed, apply a small amount of cleaning solution to the wipe. Wipe Surface: Gently wipe the surface to remove dust, dirt, and residues. Dispose of Wipe: After use, dispose of the wipe in accordance with local waste regulations. Reseal Package: Close the bag to keep remaining wipes clean and dry. Authorized Distributor Tri-Tek Electronics is an authorized distributor of MG Chemicals products, including the MG 8281-110 Lint-Free Wipes. We offer full manufacturer warranty coverage, competitive pricing, and expert factory support for all MG Chemicals products.

Read more less

MG Chemicals 407C-125ML Liquid Audio / Video Head Cleaner The MG Chemicals 407C-125ML Liquid Audio / Video Head Cleaner is a specialized cleaning solution designed to maintain and restore the performance of audio and video heads. This cleaner effectively removes oxides, dirt, and other contaminants that can degrade the quality of audio and video equipment. Suitable for use on VCRs, tape recorders, camcorders, and other magnetic tape equipment, the 407C-125ML ensures optimal performance and longevity of your devices. Features and Benefits Effective Cleaning: Removes oxides, dirt, and other contaminants that impair audio and video quality. Safe for Use: Formulated to be gentle on delicate audio and video heads, preventing damage during cleaning. Residue-Free Formula: Ensures no residues are left behind, maintaining clean and efficient heads. Quick Drying: Evaporates rapidly, reducing downtime and allowing for immediate use of equipment. Versatile Application: Suitable for a wide range of audio and video equipment, including VCRs, tape recorders, and camcorders. Specifications Type: Audio / Video Head Cleaner Volume: 125ml (4.23 fl oz) Color: Clear Odor: Mild Flash Point: < -18°C (0°F) Shelf Life: 3 years Example Use Scenario A technician is performing routine maintenance on a VCR to ensure it delivers high-quality video playback. Using the MG Chemicals 407C-125ML Liquid Audio / Video Head Cleaner, the technician applies the cleaner to the VCR heads, effectively removing any accumulated oxides and dirt. This process restores the clarity and quality of the video output, ensuring the VCR performs optimally. Authorized Distributor Tri-Tek Electronics is an authorized distributor of MG Chemicals products. Purchasing from Tri-Tek Electronics ensures you receive full manufacturer warranty coverage, the best pricing, and factory support.

Read more less

MG Chemicals 407D-125ML Audio/Video Head Cleaner - 4.2 fl. oz The MG Chemicals 407D-125ML Audio/Video Head Cleaner is a precision cleaning solution designed specifically for the maintenance of audio and video playback and recording equipment. This cleaner effectively removes oxides, oils, and other contaminants from magnetic and optical read/write heads, enhancing the performance and longevity of your equipment. Packaged in a 4.2 fl. oz (125 ml) bottle, it is an essential tool for professionals in the broadcasting, recording, and media playback industries. Features and Benefits: Effective Cleaning: Safely and thoroughly cleans magnetic and optical heads, capstans, and pinch rollers. Improves Performance: Regular use helps maintain optimal performance and extends the life of audio and video equipment. Safe for Use: The formula is safe on plastics and rubber and evaporates quickly without leaving any residue. Easy Application: Comes in a convenient bottle with application instructions to ensure proper use. Specifications: Product Type: Audio/Video Head Cleaner Volume: 4.2 fl. oz (125 ml) Form: Liquid Packaging: Bottle Application Example: The MG Chemicals 407D-125ML is ideal for use in a professional video editing studio. Regular cleaning of video playback and recording heads can prevent the loss of quality in playback and recording, essential for maintaining high production standards. For example, cleaning the heads of a video cassette recorder ensures clear and crisp playback and recording, free from artifacts caused by dirty or contaminated heads. Tri-Tek Electronics Advantage: As an authorized distributor, Tri-Tek Electronics provides full manufacturer warranty coverage, best pricing, and factory support for the MG Chemicals 407D-125ML Audio/Video Head Cleaner. Customers benefit from our commitment to quality and reliability in all products, ensuring top performance in their professional or home audio/video setups. Note: Always follow the recommended application instructions provided by MG Chemicals. Ensure that the equipment is powered off and unplugged during cleaning to avoid any risk of electrical shock or damage to the equipment.

Read more less

MG Chemicals 4226A-55ML High Voltage Clear Insulating Varnish, 2 oz Bottle The MG Chemicals 4226A-55ML High Voltage Clear Insulating Varnish is a versatile protective coating designed to shield electrical and electronic components from moisture, dust, chemicals, and other environmental contaminants. This varnish is specifically formulated for high voltage applications, offering excellent dielectric strength and reliable insulation. Its clear finish makes it ideal for protecting delicate surfaces, such as dry transfer lettering, while maintaining their appearance. In addition to its primary use in high-voltage applications, this varnish is also perfect as a protective overcoat for dry transfer lettering on electronic devices and panels. It forms a durable, flexible barrier that prevents the lettering from smudging, fading, or peeling, ensuring long-term readability and professional appearance. Features and Benefits High Dielectric Strength: Provides excellent insulation and protection in high voltage environments. Clear Finish: Protects surfaces without altering their appearance, making it ideal for overcoating dry transfer lettering. Versatile Application: Suitable for use on metals, plastics, glass, and as a protective layer over dry transfer lettering. Moisture and Chemical Resistant: Shields components and lettering from moisture, dust, and chemicals, enhancing durability. Fast-Drying: Quick-drying formula reduces downtime and allows for prompt handling of coated items. Durable and Flexible: Adheres well to various surfaces and resists cracking under mechanical stress, preserving both electrical components and lettering. Technical Specifications Volume: 55 mL (2 oz) Color: Clear Dielectric Strength: 1,100 V/mil (43.3 kV/mm) Temperature Range: -40°C to 155°C (-40°F to 311°F) Drying Time: Tack-free in 15 minutes at room temperature Application Method: Brush, dip, or spray Solvent Base: Xylene, Toluene, and Acetone Example Installation Scenario A technician working on a custom control panel might use MG Chemicals 4226A-55ML to insulate high-voltage connections and protect dry transfer lettering. After applying the lettering to label the panel’s controls, the technician applies a thin, even coat of the clear varnish over the lettering. This protects the labels from wear and tear while also insulating the electrical components, ensuring the panel remains fully functional and clearly labeled in challenging environments. Authorized Distributor Tri-Tek Electronics is an authorized distributor of MG Chemicals products. We guarantee full manufacturer warranty coverage and offer the best pricing and factory support. Visit our retail location in Mesa, AZ, or contact us for more information on how this product can meet your specific needs. MG Chemicals 4226A Technical Data Sheet (.pdf)

Read more less

MG Chemicals Liquid Rosin Flux 835-100ML 4.2 Oz    MG Chemicals Liquid Rosin Flux 835-100ML is a premium solution designed for high-quality soldering applications. This rosin flux is essential for improving soldering performance by cleaning and preventing metal oxidation during the soldering process, which allows for better flow and adhesion of the solder. Ideal for both professional and DIY electronics projects, this product ensures strong, reliable solder joints. Features and Benefits: High Purity Formula: Provides excellent wetting properties for efficient soldering. Non-Corrosive and Non-Conductive Residue: Ensures long-term reliability and performance of electronic circuits. Easy Application: Comes in a convenient 4.2 oz (100 ml) bottle with a brush applicator for precise application. Versatile Use: Suitable for a variety of applications including electrical repairs, circuit board soldering, and more. Compliance with Standards: Conforms to ASTM D-4236; RoHS compliant. Specifications: Product Type: Liquid Rosin Flux Volume: 4.2 oz (100 ml) Form: Liquid Color: Amber Solids Content: 25% by weight Specific Gravity: Approximately 0.890 at 25°C Flash Point: 46°C (115°F) Application Example: An ideal use case for the MG Chemicals Liquid Rosin Flux 835-100ML would be during the repair of a vintage radio, where precise and reliable soldering is necessary to ensure the functionality and durability of the radio's circuit connections. The liquid rosin flux can be applied to the contacts before soldering to enhance the solder's ability to wet the surfaces and form a strong bond, essential for the radio's performance and longevity. Tri-Tek Electronics Advantage: As an authorized distributor of MG Chemicals products, Tri-Tek Electronics ensures full manufacturer warranty coverage, best pricing, and factory support. This product is backed by extensive research and conforms to high-quality standards, making it an invaluable tool for installers and technicians aiming for top-tier results in their soldering projects. Note: Always ensure that the work area is well-ventilated when using chemical products for soldering. Follow all safety guidelines provided by MG Chemicals for the safest and most effective use of this product.

Read more less

- Reliable 15A Slo Blo Glass 5 x 20 Fuse - Pack of 5 for convenience and value - Suitable for electronics technicians, IT professionals, and low voltage installers Upgrade your fuse game with the Littelfuse 0218015P 15A Slo Blo Glass 5 x 20 Fuse 5/pkg. 🌟 Designed for professionals like electronics technicians, IT experts, and low voltage installers, this fuse offers top-notch performance and reliability. Here's why it's a must-have for your toolkit: - **Reliable Protection**: The 15A Slo Blo Glass fuse ensures your circuits are well-protected from power surges and overloads. - **Convenient Pack**: With 5 fuses in each pack, you'll always have spares on hand for quick replacements. - **Trusted Brand**: As an authorised distributor of Littelfuse products, Tri-Tek Electronics guarantees you're getting the real deal every time. Don't settle for subpar fuses. Trust the Littelfuse 0218015P to keep your electronics safe and running smoothly. Order yours today and experience the difference! 🛠️

Read more less