Products

Platinum Tools 100003C, EZ-RJ45 Cat5e Connector. 50/pkg.   The Original EZ-RJ45 CAT5e Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Recommended for Data Applications Only Rated to 1 Gb Crimp with one of the EZ-RJ45 Crimp Tools. *Part Numbers 100062, 100054 or 100004 Max Cable Outer Diameter: 0.240” (6.09mm) Max Insulation Diameter (Conductors): 0.040” (1.016mm) Meets ANSI/EIA/TIA/TAA specifications UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant Solid or Stranded, 24 – 23 AWG 50 micron gold plated contacts Color: Clear/Transparent Made in USA  

Read more less

Platinum Tools 100020C EZ-RJ45 Shielded Cat5e/6 (Internal Ground), 50/pkg. The EZ-RJ45® fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45® design with the performance advantage inherent to shielded products to provide an unparalleled solution for the market. EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs. Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance. Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies. Significantly improve Shannon capacity. Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade. Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040") For solid round or stranded wire cables. Made in the USA TAA Compliant

Read more less

Platinum Tools 100011C, EZ-RJ45 Cat6 Combo. Connector/Strain Relief   The Original EZ-RJ45 CAT6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Recommended for Data Applications Only Rated to 1 Gb Crimp with one of the Platinum Tools EZ-RJ45 Crimp Tools. *Part Numbers 100062, 100054 or 100004 Max Cable Outer Diameter: 0.275” (6.98mm) Max Insulation Diameter (Conductors): 0.040” (1.016mm) Meets ANSI/EIA/TIA/TAA specifications UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant Solid or Stranded, 24 – 23 AWG 50 micron gold plated contacts Color: Clear/Transparent Made in USA  

Read more less

Platinum Tools 100010C, EZ-RJ45 Cat6 Connector. 50/pkg. The Original EZ-RJ45 CAT6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Recommended for Data Applications Only Rated to 1 Gb Crimp with one of the Platinum Tools EZ-RJ45 Crimp Tools. *Part Numbers 100062, 100054 or 100004 Max Cable Outer Diameter: 0.275” (6.98mm) Max Insulation Diameter (Conductors): 0.040” (1.016mm) Meets ANSI/EIA/TIA/TAA specifications UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant Solid or Stranded, 24 – 23 AWG 50 micron gold plated contacts Color: Clear/Transparent

Read more less

Platinum Tools 100010B, EZ-RJ45 Cat6 Connector. 100/pkg.   Product Description The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 100054C or the EXO crimp tool frame with the EZ-RJ45 die part number 100072C. Details Max Cable Outer Diameter: 0.275” (6.98mm)   Max Insulation Diameter (Conductors): 0.040” (1.016mm)   Meets ANSI/EIA/TIA/TAA specifications   Solid or Stranded, 24 – 23 AWG   UL Listed and RoHS/FCC compliant   50 micron gold plated contacts   Color: Clear/Transparent   Made in USA

Read more less

Platinum Tools 100003B, EZ-RJ45 Cat5e Connector. 100/pkg. Box.   The Original EZ-RJ45 CAT5e Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Recommended for Data Applications Only Rated to 1 Gb Crimp with one of the EZ-RJ45 Crimp Tools. *Part Numbers 100062, 100054 or 100004 Max Cable Outer Diameter: 0.240” (6.09mm) Max Insulation Diameter (Conductors): 0.040” (1.016mm) Meets ANSI/EIA/TIA/TAA specifications UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant Solid or Stranded, 24 – 23 AWG 50 micron gold plated contacts Color: Clear/Transparent Made in USA  

Read more less

Platinum Tools 202003J, EZ-RJ45® CAT5/5e Connectors. 100/pkg. Jar. The Original EZ-RJ45 CAT5e Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Recommended for Data Applications Only Rated to 1 Gb Crimp with one of the EZ-RJ45 Crimp Tools. *Part Numbers 100062, 100054 or 100004 Max Cable Outer Diameter: 0.240” (6.09mm) Max Insulation Diameter (Conductors): 0.040” (1.016mm) Meets ANSI/EIA/TIA/TAA specifications UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant Solid or Stranded, 24 – 23 AWG 50 micron gold plated contacts Color: Clear/Transparent Made in USA    

Read more less

Platinum Tools 100035C, EZ-RJ45 Cat5e Strain Relief (Clear). 50 The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45® plugs. Two Patent Pending versions are offered for both the Cat5/5e and the Cat6 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords. Prolong patch cord life Maintain bend radiuses required for standards compliance Terminations have a professional finished look Optimizes electrical performance No more snags or hang ups causing tangled messes Easier to unlock the connector when unplugging from jack/port Made in the USA UL and RoHS compliant  

Read more less

Platinum Tools 202010J, EZ-RJ45 Cat6+ Connector. 100/pkg Jar The Original EZ-RJ45 CAT6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Recommended for Data Applications Only Rated to 1 Gb Crimp with one of the Platinum Tools EZ-RJ45 Crimp Tools. *Part Numbers 100062, 100054 or 100004 Max Cable Outer Diameter: 0.275” (6.98mm) Max Insulation Diameter (Conductors): 0.040” (1.016mm) Meets ANSI/EIA/TIA/TAA specifications UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant Solid or Stranded, 24 – 23 AWG 50 micron gold plated contacts Color: Clear/Transparent Made in USA

Read more less

Platinum Tools 100036C, EZ-RJ45® CAT6 Strain Relief The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45® and ezEX-RJ45® plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords. Colors: Clear, White, Blue Maintain bend radiuses required for standards compliance. Prolong patch cord life Terminations have a professional finished look No more snags or hang ups, causing tangled messes Easier to unlock the connector when unplugging from jack/port Optimizes electrical performance UL and RoHS compliant Colors: Clear, White, Blue Made in the USA

Read more less

Platinum Tools 100072C EZ-RJ45® Die for EXO Crimp Frame™ The Platinum Tools 100072C EZ-RJ45® Die is a precision-engineered accessory designed for use with the EXO Crimp Frame™, providing seamless termination of EZ-RJ45® connectors. This die ensures efficient and consistent crimps, making it an essential tool for professional network installers and technicians. Key Features Interchangeable and Reversible Design – The EZ-RJ45® Die can be easily swapped and reversed within the EXO Crimp Frame™, allowing for ambidextrous operation. Single-Cycle Crimp and Flush Trim – Performs crimping and wire trimming in a single step for increased efficiency. Secure Connector Positioning – Locks connectors into place during crimping, ensuring precise alignment and reliable terminations. Wide Compatibility – Designed for EZ-RJ45® connectors, including Cat5e and Cat6, as well as shielded versions with internal and external grounds. Specifications Product Number: 100072C Material: Durable metal construction Compatibility: Works with the EXO Crimp Frame™ Supported Connectors: EZ-RJ45® Cat5e, Cat6, Shielded Cat5e, and Shielded Cat6 (internal and external ground) Patent: U.S. Patent No. 10,490,963 B2 Usage Scenario For network professionals handling structured cabling projects, the Platinum Tools 100072C EZ-RJ45® Die streamlines termination with its single-cycle crimping and flush trim feature. Its reversible design makes it user-friendly for both left- and right-handed technicians, ensuring efficient and accurate terminations for various EZ-RJ45® connectors. This die is an essential component for maintaining high-performance network installations. Tri-Tek Electronics, an authorized distributor of Platinum Tools products, guarantees full manufacturer warranty coverage, competitive pricing, and factory support. Our retail location in Mesa, AZ, serves the Phoenix metropolitan area, including Chandler, Tempe, Gilbert, Scottsdale, and Glendale, ensuring local customers have convenient access to our products and expert service.

Read more less

Platinum Tools 100054C, EZ-RJPRO™ HD Crimp Tool The EZ-RJPRO™ HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors and pair separating splines. Not only will you overcome these connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP. Zero flex frame prevents torque loss during the crimping cycle. Tool steel die head assembly provides 360 degree of connector support during crimp. Clean, ultra flush trim on the EZ-RJ45® extended conductors. Expanded surface area on contact drivers delivers full, uniform crimp force. Built-in cutter and stripper for flat and round cable. Full surface to surface contact delivers uniform crimp force. Laser marked with wiring guide for proper wire sequence. Application The EZ-RJPRO HD Crimp Tool uses the EZ-RJ45 'crimp & trim' system and is designed to handle larger dimensional size cables. EZ-RJ45 CAT5e connectors. EZ-RJ45 Shielded CAT5e connectors. EZ-RJ45 CAT6 connectors. EZ-RJ12/11 connectors and all other RJ45, RJ12 and RJ11 modular plug connectors except AMP.    

Read more less