Products

Philmore MS12B BLK, Phono Jack w/Black Insulator RCA jack mounts in 1/4" hole panel up to 3/16" deep. BLACK insulator. Mounting nut and solder lug included.

Read more less

Philmore MS12B RED, Phono Jack w/Red Insulator RCA jack mounts in 1/4" hole panel up to 3/16" deep. RED insulator. Mounting nut and solder lug included.  

Read more less

TeknoCrafters FA3041 Photosensitive Resistor Sensor Module (KY-018 Class) The TeknoCrafters FA3041 is a compact and efficient photosensitive resistor sensor module, modeled after the KY-018 platform. It integrates a light-dependent resistor (LDR) and a 10kΩ fixed resistor to form a voltage divider circuit, providing an analog voltage output that varies with light intensity. This module is ideal for applications requiring ambient light detection and is compatible with microcontrollers such as Arduino, ESP32, and ESP8266. For Raspberry Pi users, an external analog-to-digital converter (ADC) is necessary due to the lack of native analog input. Tri-Tek Electronics, located in Mesa, Arizona, is an authorized distributor of TeknoCrafters products. We ensure full manufacturer warranty coverage, competitive pricing, and direct factory support. Our retail location serves customers in Phoenix, Chandler, Tempe, Gilbert, Scottsdale, Glendale, and surrounding areas. Features Sensor Type: Light-dependent resistor (LDR) Operating Voltage: 3.3V to 5V Output Type: Analog voltage Fixed Resistor: 10kΩ Dimensions: Approximately 21mm x 15mm x 6mm Pin Configuration: S (Signal): Analog output VCC: Power supply (3.3V to 5V) GND: Ground Example Applications Ambient Light Detection: Automatically adjust lighting systems based on ambient light levels. Security Systems: Detect changes in light intensity to monitor for unauthorized entry. Consumer Electronics: Implement automatic brightness control in displays and indicators. DIY Projects: Create interactive installations that respond to light changes. Educational Tools: Demonstrate principles of light-dependent resistance in physics experiments. Installation Example In a typical Arduino setup, connect the FA3041 module as follows: Signal (S): Connect to analog input pin A0 VCC: Connect to +5V power supply GND: Connect to ground This configuration allows the Arduino to read analog voltage changes corresponding to variations in light intensity, enabling real-time monitoring and control in various applications.

Read more less

Hosa PWD‑401 – Piggyback IEC C13 to NEMA 5‑15P Power Cord (1 ft) Overview The Hosa PWD‑401 is a daisy‑chain style power cord, designed to convert an IEC C14 inlet into a NEMA 5‑15P male plug while preserving the original IEC C13 outlet for chaining additional equipment. It’s especially useful in rack installations, power distribution setups, or any situation where you want to “stack” power connections without losing a receivable input. Key Features & Benefits Piggyback (daisy‑chain) configuration: IEC C13 female + NEMA 5‑15P male 14 AWG, 3‑conductor, Oxygen‑Free Copper (OFC) cable for low resistance Black PVC jacket: flexible, durable, professional appearance Compact 1 ft length—ideal for close spacing in racks or tight installations Designed to maintain an available IEC C13 port for adding another device Suitable for North American / NEMA standard power systems Specifications Parameter Value Cable Length 1 ft (approx. 30 cm) Conductors 3 × 14 AWG, Oxygen‑Free Copper Input Connector IEC C13 (female) Output Connector NEMA 5‑15P (male) Jacket Material PVC, black Use Case Daisy‑chaining in rack enclosures or behind equipment stacks Standard Compliance Meets typical North American power cord safety norms Typical Use / Application Scenario In a pro audio rack, you might have several devices each with an IEC C14 inlet, but limited number of free power outlets. Using a PWD‑401, you can plug it into a device’s C14 inlet, and then use its male NEMA plug to connect to a wall outlet or power conditioner — while still leaving the original C13 accessible to feed another device. You can “stack” multiple PWD‑401 units in line to extend the chain. This is particularly helpful for neat cable routing and reducing the number of dropped outlets in one rack. Tips & Best Practices Ensure that the total current of all chained devices doesn’t exceed the cable’s safe current rating (based on 14 AWG and typical power cord design). Keep the run as short as feasible to reduce voltage drop (1 ft helps minimize this). Use snug, strain-relieved terminations to avoid stress at connection points. Avoid sharp bends close to the connectors—leave some flex radius. For critical or high-current devices, use dedicated power runs rather than chaining multiple loads. Why Buy from Tri‑Tek Electronics? Authorized Reseller — ensures genuine Hosa product, full warranty, and factory support Arizona Availability — in-stock for Mesa / Phoenix area pickup or rapid local shipping Support & Inventory — we maintain stock to support both small fixes and larger installation orders

Read more less

Noble Wire 513, Piggyback Quick-Connect 22-18AWG 100/pk   Push-on, piggy back terminals are female type connectors that mate with male push-on terminals, and have an additional male blade to connect a primary and secondary wire, all in one connection. Push-on, piggy back terminals are popular in auto and marine applications, but are also used in various other electrical applications.

Read more less

Jonard Tools R-5926 Pin Extraction Tool The Jonard Tools R-5926 Pin Extraction Tool is a highly effective tool for removing AMP CPC pins from connector blocks, specifically designed for contact sizes 16-20. This tool simplifies the process of extracting pins by pushing them out from behind the connector block, saving time and effort during installations or repairs. Its smooth built-in plunger ensures that the pin extraction is quick and efficient without damaging the connectors. Key Features: Compatibility: Designed for use with nearly all AMP-style pin connectors, compatible with contact sizes 16-20. Efficient Pin Removal: Smooth built-in plunger mechanism makes the removal of pins quick and easy, ensuring a clean extraction. Precision Design: Allows you to push pins out from the back of connector blocks, providing safe and non-destructive removal. Example Usage Scenario: The R-5926 Pin Extraction Tool is ideal for use in telecommunications, networking, or automotive electrical installations. For example, when working with AMP CPC connectors in a wiring harness, this tool ensures that pins can be removed efficiently without causing damage to the connector block, making it useful for maintenance and repair tasks. Specifications: Contact Size Compatibility: 16-20 Function: Pin extraction for AMP-style connectors Design: Built-in plunger for easy pin removal Tri-Tek Electronics in Mesa, AZ, provides the Jonard Tools R-5926 with full manufacturer warranty and technical support to ensure smooth and reliable performance in your pin extraction needs.

Read more less

Pan Pacific DIN-46100-5S-P, Pkgd DIN Connector 5 Pin / Female Solder Type  

Read more less

Pan Pacific DIN-46000-5P-P, Pkgd DIN Connector 5 Pin/Male Solder Type  

Read more less