Products

TeknoCrafters FA3018 LM393 Microphone Noise Decibel Interface 3-PINS Sound Detection Sensor Module The TeknoCrafters FA3018 LM393 Microphone Sound Detection Sensor is a compact, high-sensitivity digital sound sensor designed for sound level monitoring and noise detection in microcontroller-based applications. Utilizing an onboard electret microphone and LM393 comparator chip, this module provides a digital signal output when detected noise levels exceed a user-adjustable threshold. With its straightforward 3-pin interface, this sensor is ideal for integration into Arduino, Raspberry Pi, ESP32, and other microcontroller environments. Whether used in DIY automation, interactive sound installations, or as part of a noise-triggered alert system, the FA3018 offers dependable performance in a small form factor. Key Features Digital Output Signal – Outputs HIGH or LOW depending on noise level detection Integrated Sensitivity Adjustment – Onboard potentiometer allows user to calibrate the detection threshold Voltage Compatibility – Operates on 3.3V to 5V systems, suitable for a variety of controllers Simple 3-Pin Interface – Includes VCC, GND, and Digital OUT for easy connectivity Status Indicators – Power and output LEDs provide real-time visual feedback Compact and Lightweight – Designed for space-constrained projects and prototyping Technical Specifications Specification Description Operating Voltage 3.3V – 5V Output Type Digital (HIGH/LOW) Sensitivity Control Adjustable via onboard potentiometer Interface 3-pin: VCC, GND, OUT Dimensions Approx. 32mm x 17mm x 15mm Example Installation Scenario In a noise-activated alarm system, the FA3018 can be mounted inside a utility box or entrance hallway. When sound levels such as clapping, knocking, or loud voice commands exceed the preset threshold, the module outputs a HIGH signal. This can be used to trigger an alert, power a relay, or send a notification via a connected microcontroller, offering a low-cost, sound-responsive control solution. Benefits for Installers and Technicians Quick Integration – Simplified 3-pin layout makes setup fast and intuitive Calibrated Detection – Adjustable sensitivity helps tailor the module to various environments Highly Compatible – Works with common development platforms including Arduino, Raspberry Pi, and ESP32 Reliable Output – Ensures consistent behavior in sound detection applications Warranty and Support Tri-Tek Electronics is an authorized distributor of TeknoCrafters products, providing complete manufacturer warranty support, direct technical assistance, and factory-backed pricing advantages. Our retail store in Mesa, Arizona, is proud to serve the greater Phoenix area, including Chandler, Tempe, Gilbert, Scottsdale, and Glendale.

Read more less

Jonard Tools BLONGNOSE, Long Nose General Use Pliers Jonard’s long nose pliers are made of ultra strong tool steel and are heat treated for maximum strength and durability. These long nose pliers feature the following: Slim chain nose design for working in confined areas Knurled jaws ensure tight grip every time Ergonomically designed handle with dipped plastic grip for greater comfort and torque   Jaw Length 1-1/2" (38.10mm) Jaw Thickness 3/8" (9.53mm) Jaw Width 3/4" (19.05mm) Material Tool Steel Length 6-7/8" (174.623mm) Weight 0.438 lbs UPC No. 811490012189

Read more less

Wi-Tek WI-CPE800-KIT V2 Long-Range 5GHz Gigabit Wireless Transmitter Elevate your CCTV installations with the Wi-Tek WI-CPE800-KIT V2 Wireless Transmitter! Designed for professionals in the electronics, IT, and low voltage installation fields, this powerful device boasts top-notch specifications to meet your needs. With a 5GHz frequency and 867Mbps speed, it ensures fast and stable wireless transmission, while its impressive 5km coverage range makes it perfect for long-distance installations. Key Features: Frequency: 5GHz Speed: 867Mbps with 802.11ac Coverage: Up to 5km 1*10/100/1000 Base-T LAN Ethernet port 802.3af/at PoE Input Built-in 12dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 29dBm Plug and Play for PTP mode IP65 protection level and 8kV ESD protection Centralized Cloud Management Platform Package Contents: 2 x CPE, 2 x Accessory Set, 1 x Quick Installation Guide, 2 x 24V Adapter, 2 x RJ45 Cables Download Detailed Product Specifications Here.

Read more less

Pan Pacific AD-LGC-9MF, Low Profile D-Sub 9-Pin Port Protector M/F  

Read more less

Pan Pacific AD‑LGC‑H15MM — Low Profile VGA HiDen 15‑Pin Gender Changer (Male ↔ Male) Product Overview The Pan Pacific AD‑LGC‑H15MM is a low profile HiDen (high density) 15‑pin D‑Sub gender changer, with male connectors on both ends. It is designed to couple two female HD15 (VGA-style) ports in a compact footprint, ideal where space is limited or depth behind panels is shallow. This model is part of Pan Pacific’s passive adaptor series, specifically designed for use in environments requiring minimal connector depth and clean inline connectivity. This version of the AD-LGC-H15MM is specified without pin 9, making it ideal for systems that do not require a power signal (such as 5V on pin 9 in some VGA configurations). The omission of pin 9 also reduces potential shorting risks and signal interference in simplified signal-only transmission scenarios. Key Features & Specifications Parameter Description Connector Type D‑Sub HiDensity 15‑pin (HD15) VGA Gender Male ↔ Male (couples two female ports) Profile Low profile (shallow depth for tight installations) Pin 9 Not present / not wired Application Type Inline VGA coupling or panel-mount scenarios Shell Type Metal shell with hex nut spacers for secure fitment Use Cases & Best Practices Tight-Space VGA Panel InstallationsIdeal for mounting behind wall plates, control panels, or rack-mounted faceplates where clearance is minimal. Ensures flush mounting without stressing connectors or causing bulging. Direct VGA Cable CouplingEnables quick connection between two female VGA cables or port jacks without the need for bulky adapters. Maintains a professional, clean install finish. Signal-Only VGA SystemsSuitable for signal-only VGA configurations where pin 9 (typically used for +5V power) is not required. Reduces unnecessary voltage lines in environments where they are not needed. Rack System CablingIn equipment racks or A/V hubs where adjacent ports and limited depth are concerns, this low-profile gender changer minimizes spatial interference and maintains proper cable management. Example Installation Scenario An AV technician is wiring a conference room with a VGA wall plate connected to a projector input. Both ends of the setup use female VGA connectors. The AD‑LGC‑H15MM allows the technician to join these female ends cleanly and securely behind the wall plate. Its low-profile design prevents wall obstruction and stress on the connectors, maintaining both aesthetic and electrical integrity. Another common use case would be within an AV rack, where space between patch panels and rear bulkhead connections is limited. This gender changer fits easily without interfering with other panel-mounted gear or straining connector pins. Tri-Tek Electronics is an authorized distributor of Pan Pacific products. We ensure full manufacturer warranty coverage, factory-direct support, and offer the best industry pricing. Local customers in Mesa, AZ and surrounding areas including Phoenix, Chandler, Tempe, Gilbert, Glendale, and Scottsdale can also benefit from convenient in-store pickup and technical support from our retail location.

Read more less

Pan Pacific AD-LGC-D9NM, Low Profile Null Modem Adaptor  

Read more less

Hosa PHX-106F Low Voltage Adapter - XLR3F to PHX3M The Hosa PHX-106F is a high-quality low-voltage adapter designed to convert an XLR3F (3-pin female XLR) connection to a PHX3M (3-pin Phoenix) connection. This adapter is ideal for integrating professional audio equipment that utilizes XLR connectors with devices that require Phoenix connectors, commonly found in fixed installations such as commercial sound systems and broadcasting setups. Hosa, known for its reliable and durable products, ensures that this adapter meets the highest standards for signal integrity and longevity. Key Features XLR3F to PHX3M Conversion: This adapter allows you to easily convert a 3-pin XLR female connection to a 3-pin Phoenix male connection, making it versatile for various audio installation requirements. Low Voltage Compatibility: Designed specifically for low voltage audio signals, ensuring safe and effective performance in professional and commercial audio systems. Durable Construction: Built with high-quality materials, the PHX-106F is designed to withstand the rigors of continuous use in demanding environments. Compact and Lightweight Design: The adapter's compact size makes it easy to use in tight spaces, while its lightweight design ensures it won't add unnecessary bulk to your setup. Applications Professional Audio Installations: Ideal for integrating XLR-equipped audio equipment with systems that require Phoenix connections, such as commercial audio distribution systems and amplifiers. Broadcasting: Suitable for use in broadcast environments where reliable and secure connections are crucial. Fixed Installations: Perfect for permanent installations in venues, churches, or conference rooms where audio equipment must interface with control systems or amplifiers using Phoenix connectors. Why Choose the Hosa PHX-106F? The Hosa PHX-106F adapter provides a simple yet effective solution for connecting XLR-based audio devices to systems requiring Phoenix connectors. Its robust construction and compatibility with low voltage signals make it a reliable choice for professionals needing a secure and consistent audio connection in various installation scenarios. Authorized Distributor Tri-Tek Electronics is an authorized distributor of Hosa Technology products. We offer full manufacturer warranty coverage, competitive pricing, and expert support. Visit our retail location in Mesa, AZ, to purchase the Hosa PHX-106F and explore our full range of professional audio connectors and adapters.

Read more less

Jonard Tools CP-475 Pulley for Low Voltage Electrical, Network, & COAX Cables (2 pack) The CP-475 is a set of two cable pulleys designed to help install electrical, COAX, network, and other various low voltage cables. With their swivel snap hooks, deep grooves, and anti-friction bearings, these pulleys keeps cables aligned with the direction of the pull, preventing snags and kinks. Holds up to 20 CAT5/6 network cables  Swivel snap hook installs easily and keeps pulley aligned with direction of pull to prevent kinks Anti-friction roller bearings and deep grooves allow cable to be pulled smoothly and easily Made from a high strength ABS plastic and zinc coated steel to provide enhanced durability and longer life Easy to remove the pulley after cable is installed  Includes (2) pulleys Number of Cables Up to 20 Maximum Weight Capacity 120 lb (54.43 kg) Channel Width 1.43" (36.41 mm) Diameter 4.75" (12.07 cm) Pulley Weight .63 lb each (287.58 g) Total Weight 1.27 lb (576.06 g) Length 4.75(12.065cm) Weight 1.27 lb (576.58 g)

Read more less

Vanco LV4, Low Voltage Mounting Bracket - Quad   Details Low Voltage mounting bracket, four gang for installation on existing construction for class 2 wiring only. Single through 4-gang brackets for installations on existing construction. Designed to install low voltage Class 2 only.SPECIFICATIONS: Non-metallic—better than metal and costs less too! For communications, cable TV, computer wiring. Cat 5 listed Adjusts to fit 1/4” to 1” thick wallboard, paneling, or drywall Bracket is its own template for cut out Mounting wings hold bracket securely against wall when screws are tightened

Read more less