Products

Philmore Mfg. 30-10034, 4PDT, ON-ON, Mini Toggle Switch Current Rating: 5A@ 120V AC/28V DC, 2A@ 250V AC Initial Contact Resistance: 2-4V DC 1A 10m ohm Insulation Resistance: 1000 Meg ohm (Min.) Dielectric Strength: 1000V RMS @ Sea Level Contact Material: Coin Silver - Silver Plate Terminal Material: Brass - Silver Plate Terminal Type: Solder Action ON-ON Actuator Metal Mounting Hole: .25"

Read more less

4TB Seagate SkyHawk Surveillance Internal Hard Drive Perfect For: SMB-surveillance DVR and NVR Form Factor: 3.5-inch Internal HDD Capacity: 4 TB # of HD Cameras Supported: 1 to 64 Workload Rating: 180TB/yr Rescue Service Recovery Services: Optional Warranty: 3 years These drives provide the following key features: 24x7 capability Balance technology to support multiple drives in a system Compliant with RoHS requirements in China and Europe Full-track multiple-sector transfer capability without local processor intervention Low activity and idle power Low-RPM spindle speed Native Command Queuing with command ordering to increase performance in demanding applications Off-the-shelf compatibility Performance-tuned for RAID applications Rated for 1M hours MTBF SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns. State-of-the-art cache and on-the-fly error-correction algorithms Streaming video optimization - consistent command completion times & ERC support Support for S.M.A.R.T. drive monitoring and reporting Supports ATA8 streaming commands Supports latching SATA cables and connectors (not included) Worldwide Name (WWN) capability uniquely identifies the drive  

Read more less

The 4TB WD Purple Surveillance Hard Drive is specifically engineered to meet the demands of continuous, 24/7 high-definition surveillance systems. It's designed to withstand the challenges associated with NVR environments, such as elevated heat fluctuations and equipment vibrations. The drive supports a workload rate of up to 180 TB/year, making it well-suited for surveillance systems with up to 64 cameras. Key features of the WD Purple Surveillance Hard Drive include: Optimized for Surveillance Systems: The drive is built to handle the demands of surveillance DVR and NVR systems, ensuring reliable operation in these environments. AllFrame 4K Technology: This technology improves video capturing, helping to reduce errors, pixilation, and interruptions in video recorder systems. Wide Compatibility: The drive integrates seamlessly with a broad range of industry-leading enclosures and chipsets, ensuring easy setup and compatibility with your NVR system. Low Power Consumption: The Intelliseek technology in WD Purple drives reduces ambient noise and vibrations, which is essential in high-temperature, always-on surveillance environments. 3-Year Limited Warranty: WD Purple drives come with a 3-year limited warranty, offering confidence and reliability in your surveillance storage. Designed for Harsh Environments: These drives are tailored to operate continuously in extreme conditions, including varying climates and temperatures. The WD Purple Hard Drive is a smart choice for surveillance applications, offering reliable and high-quality video playback when it's most needed. Its storage capabilities are not only efficient but also designed to cater to the evolving needs of modern surveillance systems

Read more less

DYNACOM 2016-WB700 4U Hinged Wall Mount Bracket   Hinge Bracket, 7" H x 19" W x 6" Deep Color : Black Product Depth : 6 in Product Height : 7 in, 4U Product Width : 19 in

Read more less

Hammond Mfg. PPFS19007BK2 4U Vented Rack Panel - Black Features: Constructed of 16-gauge steel. Fits standard EIA compliant rails. Allows 25% airflow through panel. Finished in smooth powder paint. TAA compliant for GSA Schedule purchases. RoHS Compliant. Manufactured in North America.

Read more less

Simplified MFG SW41e-8K: 4x1 4K HDMI Switch with eARC/ARC, Ethernet Control, and Seamless Switching Tri-Tek Electronics proudly offers the Simplified MFG SW41e-8K, a sophisticated 4x1 HDMI switch that supports advanced features such as eARC/ARC, HDCP repeater, and CEC functions. This switch is ideal for integrating modern AV systems with high-definition video quality and seamless control options. As an authorized distributor, we provide full manufacturer warranty coverage, best pricing, and comprehensive factory support. Product Overview The Simplified MFG SW41e-8K is a feature-rich 4x1 HDMI switch designed to manage multiple HDMI sources with ease. It supports ultra-high-definition 4K video and offers Ethernet control for advanced network integration. The SW41e-8K also includes eARC/ARC routing, which allows audio from your display to be sent back to input 1, enabling connection to soundbars, AV receivers, or other devices that support eARC/ARC. When using eARC/ARC, the switch functions as a 3x1 device, optimizing your AV setup while maintaining exceptional video and audio quality. With features like seamless switching, auto-switch mode, and multiple control options, the SW41e-8K is perfect for professional AV installations, home theaters, and commercial setups. This device can be used close to the display with HDMI cables or at a remote location using the EX3-8K 2. Features HDMI 2.1 (48Gbps) & HDCP 2.3 compliant Supports 48Gbps FRL (Fixed Rate Link) & 18Gbps TDMS bandwidths Video resolutions up to 8K@60Hz. (4:2:0) 12-bit, 8K@30Hz. (4:4:4) 12-bit, & 4K@120Hz. (4:4:4) 12-bit Unique audio routing feature, can be used as a traditional HDMI switch with four inputs to one output, as an ARC/eARC extractor (HDMI and/or optical, or as a three input switch with audio extraction to a local sound bar that supports eARC/ARC HDMI 2.1 support including VRR (Variable Refresh Rate), ALLM (Auto Low Latency), QMS (Quick Media Switching), QFT (Quick Frame  Transfer), & SBTM (Source-Based Tone Mapping) Supports HDR, HDR10+, HLG and DolbyVision™ Supports all high-definition audio formats including Dolby+/Atmos Supports eARC/ARC Supports CEC pass-thru Supports Audio De-embed to S/PDIF (optical/analog) Manual and auto-switching feature EDID override capability  Technical Specifications HDMI Compliance HDMI 2.1 HDCP Compliance HDCP 2.3 Video Bandwidth 48Gbps FRL / 18Gbps TMDS Video Resolution Up to 8K@60Hz. (4:2:0) 12-bit, 8K@30Hz. (4:4:4) 12-bit, & 4K@120Hz. (4:4:4) 12-bit Color Depth 8/10/12 bit Color Space RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 /4:2:0 HDR Support HDR, HDR10+, HLG, Dolby vision   Audio Formats HDMI Input/Output, eARC LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+) Dolby Atmos, DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X Optical Output LPCM 2.0CH., Dolby/DTS 5.1CH. Analog Output LPCM 2.0CH ESD Protection Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge) Connection Input 4×HDMI Type A (19-pin female)   Output 1×HDMI Type A (19-pin female) 1x Optical (S/PDIF) 1x 3.5mm Stereo Mini-Jack Control 1× Micro USB port for factory use Mechanical Housing Metal Enclosure Color Black Dimensions 176mm/6.93” (W) × 68mm/ 2.7” (D) × 18mm/.71” (H) Weight 315g / 11.11 oz. Power Supply Input: AC100 - 240V 50/60Hz, Output: DC 5V/1A (US/EU standards, CE/FCC/UL certified) Power Consumption 2W (Max) Op. Temperature 0°C ~ 40°C / 32°F ~ 104°F   Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F   Relative Humidity 20~90% RH (non-condensing)   Installation Scenario In a modern home theater setup, the Simplified MFG SW41e-8K can connect multiple HDMI devices such as gaming consoles, streaming boxes, and Blu-ray players to a single TV. The eARC/ARC functionality allows audio to be sent from the TV back to a soundbar or AV receiver via input 1, reducing the need for additional cables and simplifying the overall setup. With the auto-switch mode, the switch will automatically select the most recently powered-on device, ensuring a seamless user experience. For corporate environments, the SW41e-8K can manage multiple presentation sources, allowing them to be displayed on a single screen in a conference room. The Ethernet control feature enables IT administrators to remotely control and configure the switch, streamlining operations and enhancing meeting efficiency. In commercial settings, such as digital signage or retail displays, the SW41e-8K facilitates the easy management of various content sources to a single display. The auto-switch mode ensures that the most relevant content is always displayed, while the LED indicators provide a quick and easy way to check the status of each input. Tri-Tek Electronics Advantage Authorized Distributor: Enjoy full warranty coverage and factory support. Expert Support: Our knowledgeable staff is ready to assist with product selection and installation guidance. Best Pricing: Competitive pricing with a commitment to quality and customer satisfaction.

Read more less

Simplified MFG M44KT: 4x4 4K HDMI Matrix with Scaling and Long-Distance Extenders Tri-Tek Electronics is excited to offer the Simplified MFG M44KT, a powerful 4x4 HDMI matrix switch that supports 18Gbps data transfer for high-definition video distribution across multiple displays. This kit includes four 70m HDMI over category cable receivers, providing long-distance signal transmission with exceptional video and audio quality. As an authorized distributor, we ensure full manufacturer warranty coverage, competitive pricing, and comprehensive factory support. Product Overview The Simplified MFG M44KT is a versatile HDMI 2.0b HDBaseT matrix switch designed to route four HDMI sources to up to eight displays, with each output channel supporting both CAT5e/6/7 and HDMI outputs. This innovative design allows for mirrored connections to two displays per output channel. The included receivers extend the HDMI signal up to 230 feet (70 meters) for 1080p or 165 feet (50 meters) for 4K, making it ideal for both residential and commercial applications. Each output on the M44KT can be independently scaled, allowing for different resolutions on different displays. This matrix also supports high-resolution digital audio formats and a variety of HDR standards, ensuring a rich multimedia experience. The device can be controlled via IR remote, RS-232, TCP/IP, and an intuitive web GUI, making setup and management straightforward. Key Features 4x4 HDMI Matrix Switching: Connects four HDMI sources to up to eight displays with mirrored HDMI and CAT outputs. Scaling HDMI 2.0b: Supports independent scaling on each output, allowing different resolutions without affecting other outputs. Long-Distance Transmission: Includes four compact receivers that support signal extension up to 230 feet (70 meters) for 1080p and 165 feet (50 meters) for 4K over CAT5e/6/7 cables. High-Resolution Support: Handles resolutions up to 4K @ 60Hz (4:4:4) for crisp and clear video output. HDBaseT 18Gbps Bandwidth: Ensures high-speed transmission of video and audio signals without compression or loss. Advanced Audio Formats: Compatible with LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, Atmos, and DTS-HD Master Audio. HDR Support: Supports HDR8/10/10+, Dolby Vision™ (HDMI output only), and HDR10+ (category output only). Multiple Control Options: Manage the matrix via IR remote, RS-232, TCP/IP, front panel buttons, or the web GUI. Web GUI for Easy Setup: Use the web interface for configuring scaling, EDID settings, and more. Two-Way PoE: Powers both the transmitter and receiver with a single power supply, simplifying installation. Compact and Durable Design: Built for reliable performance in a variety of installation environments. Three-Year Warranty: Ensures reliable performance and customer satisfaction. Technical Specifications Specification Details HDMI Inputs 4 x HDMI HDMI Outputs 4 x HDMI, 4 x CAT5e/6/7 Max Resolution 4K @ 60Hz (4:4:4), HDR support Bandwidth 18Gbps Transmission Distance Up to 230 feet (70 meters) for 1080p, 165 feet (50 meters) for 4K over CAT5e/6/7 HDR Support HDR8/10/10+, Dolby Vision™ (HDMI output only), HDR10+ (category output only) Audio Formats LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, Atmos, DTS-HD Master Audio Control Options IR Remote, RS-232, TCP/IP, Web GUI, Front Panel EDID Management Comprehensive EDID handling via Web GUI Power Supply Two-way PoE, single power supply for TX and RX Dimensions Matrix: 17.3” x 7.9” x 1.7” Receivers: 4.1” x 2.2” x 0.9” Weight Matrix: 6.8 lbs Receivers: 0.3 lbs each Warranty 3 Years Installation Scenario In a home theater setup, the Simplified MFG M44KT allows you to connect multiple media sources to different displays in various rooms, providing each with independent resolution settings. The included receivers enable long-distance HDMI signal transmission without loss of quality, ensuring that every display receives high-definition content. The matrix's two-way PoE feature simplifies installation by reducing the need for additional power supplies, and the IR control allows you to manage your sources from any display. In a corporate environment, the M44KT can distribute video content from a central media server to multiple conference rooms or office displays, making it perfect for presentations, digital signage, and video conferencing. The ability to control the matrix via RS-232, TCP/IP, and the web GUI allows for seamless integration with existing AV systems, and the extensive audio support ensures clear and powerful sound for all applications. For commercial applications, such as retail stores or sports bars, the M44KT provides a robust solution for distributing promotional videos, live sports, or informational content to multiple screens. The ability to output different resolutions on different displays allows for dynamic and engaging setups that enhance the customer experience. Tri-Tek Electronics Advantage Authorized Distributor: Full warranty coverage and factory support. Expert Support: Knowledgeable staff ready to assist with product selection and installation guidance. Best Pricing: Competitive pricing with a commitment to quality and customer satisfaction.

Read more less

TeknoCrafters FA4043 4×4 Matrix 16-Key Membrane Switch Keypad The TeknoCrafters FA4043 is a compact 4×4 matrix membrane switch keypad featuring 16 tactile keys, ideal for seamless integration with Arduino, Raspberry Pi, and other microcontroller-based platforms. Its slim membrane construction and adhesive backing make it a preferred choice for projects that demand both reliability and space efficiency. Product Overview With clearly labeled tactile keys in a standard 4×4 layout, this keypad provides a straightforward interface for user input. It’s perfect for tasks like numeric entry, menu selection, and password input in embedded systems. The flexible, durable membrane allows the keypad to be mounted in a variety of enclosures or directly on panels using its built-in adhesive backing. Key Features 4×4 matrix layout with 16 responsive keys Compatible with Arduino, Raspberry Pi, and other microcontrollers 8-pin female header connector for easy interfacing Slim profile with adhesive backing for quick installation Ideal for compact control panels, security systems, and custom projects Technical Specifications Circuit Rating: 35V DC, 100mA, 1W Contact Resistance: 10Ω–500Ω (varies by lead length and material) Insulation Resistance: ≥100MΩ at 100V Dielectric Withstand Voltage: 250V RMS (50–60Hz for 1 minute) Contact Bounce Time: ≤5ms Operating Force: 150–200N Key Travel: 0.6–1.5mm Keypad Dimensions: 6.9 × 7.6 cm Cable Length: Approximately 8.5 cm Operating Temperature Range: 0°C to 50°C Storage Temperature Range: -40°C to 80°C Humidity Tolerance: 90%–95% RH at 40°C for 240 hours Vibration Resistance: 20G max (10–200Hz per MIL-STD-202) Key Lifespan: Over 1 million actuations Application Scenario Whether you're designing a PIN entry system for access control, building a handheld interface for a robotics project, or developing a custom menu input device, the FA4043 provides durable, responsive input in a compact format. Its reliable performance and ease of use make it a go-to solution for both professional and hobbyist applications. Authorized Distribution Tri-Tek Electronics is an authorized distributor of TeknoCrafters products, providing genuine components backed by the full manufacturer warranty. Our retail location in Mesa, AZ serves the entire Phoenix metro area—including Tempe, Chandler, Gilbert, Glendale, and Scottsdale—with the best pricing, factory support, and in-stock availability.

Read more less

Vertical Cable 048‑146/40W 4‑Inch J‑Hook with Wing for ¼‑Inch Rod Overview The Vertical Cable model 048‑146/40W is a 4‑inch J‑Hook featuring a wing for mounting on a ¼‑inch rod. Constructed from pre‑galvanized steel with a rust‑resistant zinc coating, it provides strong, reliable support for structured cabling systems. Designed to meet the needs of installers handling moderate to large cable bundles, this hook is ideal for use in overhead and rod-mounted cable management applications. Key Features Feature Details Product Type 4‑inch J‑Hook with Wing for ¼‑inch Rod Material Pre‑Galvanized Steel with Rust‑Resistant Zinc Coating Mounting Style Wing design for ¼‑inch rod Thickness 0.05 in (≈ 1.35 mm) Weight 0.46 lbs Load Capacity 60 lbs Estimated Capacity for Cat 6 Cables Designed to support up to 60 lbs of cable load Approximate capacity for Cat 6 cables: 110 to 130 cables, depending on cable diameter and bundling technique Provides proper spacing to maintain bend radius and minimize performance loss Typical Applications / Usage Scenario Ideal for use in structured cabling installations in commercial, residential, and industrial environments Frequently used to support Cat 6 and other low-voltage cables in data centers, telecom rooms, and ceiling-mounted systems Mounts directly to ¼‑inch threaded rods for overhead routing or grid support in open ceiling infrastructure Installation Notes Attach the wing securely to a ¼‑inch rod using proper hardware Ensure cables are seated within the hook to avoid stress or sharp bends Do not exceed the 60 lbs weight rating—factor in slack and potential future cable additions Follow standard spacing practices for hook installations, typically every 4–5 feet depending on cable weight and type Advantages Durable steel body ensures long-term strength and reliability Zinc coating offers corrosion resistance for extended life Wing mounting style provides flexible installation for rod-based supports Supports large bundles of Cat 6 cabling while maintaining cable integrity and organization Considerations Using shielded or extra-thick cables will reduce the number of cables supported Always evaluate your cable routing plan to avoid overfilling or stressing hook capacity Periodic inspection of installed hooks is recommended in high-use environments Tri‑Tek Electronics Note: Tri‑Tek Electronics is an authorized distributor of Vertical Cable products. We provide full manufacturer warranty coverage, factory support, and competitive pricing. This item is in stock at our Mesa, AZ retail location and available for same-day pickup or fast local delivery throughout Phoenix, Tempe, Chandler, Gilbert, Scottsdale, Glendale, and surrounding areas. Product Specifications (Summary) SKU / Model: 048‑146/40W Type: 4‑inch J‑Hook with Wing (for ¼‑inch rod) Material: Pre‑Galvanized Steel, Zinc Coated Thickness: 0.05 in (≈ 1.35 mm) Weight: 0.46 lbs Load Capacity: 60 lbs Estimated Cable Capacity (Cat 6): ~110 to 130 cables

Read more less

Tri‑Tek CORD‑1‑5 — 5 ft 18 AWG 5‑15P → IEC C13 Power Cord (Closeout) Tri‑Tek Electronics – Authorized DistributorTri‑Tek Electronics (Mesa, AZ) is pleased to offer the CORD‑1‑5 power cord under Closeout Special terms. As an authorized distributor, we provide full manufacturer warranty coverage, local support, and fast shipping to Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale and surrounding Arizona regions. Because this item is a closeout, quantities are very limited — availability is strictly while stock lasts. Product Overview The CORD‑1‑5 is a molded AC power cable that connects standard U.S. mains to devices with IEC C13 inlets. It features: Input: NEMA 5‑15P (3‑prong U.S. plug) Output: IEC 60320 C13 (female) Length: 5 ft (≈ 1.52 m) Conductors: 3 × 18 AWG copper Typical Rating: Up to ~10 A / 125 V (verify with equipment specs) Molded strain reliefs on both ends PVC jacket / insulation, flame‑rated to standard industry levels Reliable flexibility and mechanical durability This 5 ft length is commonly used for computer workstations, desktop power connections, small network devices, and any scenario where moderate reach is sufficient without excessive slack. Features & Benefits Compact, efficient length: Ideal for connecting equipment in close proximity to outlets while avoiding cable excess Standard compatibility: Works with PCs, servers, networking gear, UPS units, and many electronic devices Strain relief molded ends: Reduces stress at connector interfaces, improving lifespan Closeout bargain: Excellent value pricing for end‑of‑line stock Local fulfillment: In stock at Tri‑Tek’s Mesa, AZ facility for rapid dispatch and support in Phoenix area Example Installation Scenario For an office computer desk setup where the wall outlet is about 4 ft behind the PC, the 5 ft CORD‑1‑5 is just enough to reach cleanly without looping excessive cable behind furniture. The molded connectors make insertion and removal simple, and the compact length keeps cable runs tidy in confined spaces. Because Tri‑Tek maintains local inventory in Mesa, installers around Phoenix can pick up spares or replacements quickly for jobs in the field. Usage & Safety Notes Always verify that your device’s current draw remains under the allowable limit for 18 AWG (commonly ~10 A at 125 V) Avoid tight bundling, proximity to heat sources, or sharp bends that might degrade insulation Inspect the cord periodically, particularly at the ends, for nicks, abrasion, or damage; replace if any compromise is detected Because this is a closeout item, once stock is depleted it may no longer be available at this price

Read more less