AC Power Cables

Tri‑Tek CORD‑1‑705 7.5 ft 18 AWG NEMA 5‑15P → IEC C13 Power Cord Tri‑Tek Electronics – Authorized DistributorTri‑Tek Electronics, with a retail location in Mesa, AZ, is proud to offer the CORD‑1‑705 power cord with full manufacturer warranty support and local technical assistance for installers, IT technicians, and hobbyists in Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale, and surrounding areas. Product Description The CORD‑1‑705 is a fixed-length, molded AC power cable designed for reliable mains power delivery in IT, home theater, networking, and general electronics applications. It features: NEMA 5‑15P (standard U.S. 3‑prong plug) on one end IEC 60320 C13 female connector on the other end 7.5 ft (≈ 2.29 m) total length 18 AWG, 3‑conductor cable Rated for typical loads up to 10 A / 125 V (check your device specs) Molded strain relief on both ends Durable PVC jacket, flame rated to standard industry norms Because this is a Special Purchase, Limited Stock item, quantities are constrained and availability is on a first‑come basis. Once it’s sold out, replacement lead times may apply. Features & Benefits Feature Benefit / Use Case 7.5 ft length Offers flexibility in routing while keeping cable slack manageable in racks or desk installations Standard 5‑15P to IEC C13 Compatible with most PCs, network switches, UPS units, monitors, and many electronic devices 18 AWG conductors Adequate gauge for typical office or rack loads up to ~10 A Molded strain reliefs Reduces stress on terminations and increases mechanical durability Locally stocked by Tri‑Tek Faster fulfillment and local support from Mesa, AZ Typical Installation Scenario An installer is mounting a small network switch in a wall cabinet that sits about 7 feet from a power outlet. The 7.5 ft length of CORD‑1‑705 is just enough to connect the device without excessive slack. The molded ends and proper strain relief help maintain a clean, professional installation. Because Tri‑Tek has local stock in Mesa, AZ, the installer can quickly procure replacements or spares for job sites around Phoenix. Notes & Recommendations Verify that your device’s current draw does not exceed the rating for 18 AWG (commonly ~10 A at 125 V) Avoid bundling tightly with high-heat or high-current cables to prevent undue heating Inspect for any cuts, abrasion, or damage before use; replace immediately if any compromise in insulation is found Because this is a Special Purchase / Limited Stock item, stock levels are subject to change — order promptly to reserve units

Read more less

Tri‑Tek CORD‑1‑9 — 9 ft 18 AWG 5‑15P → IEC C13 Power Cord (Closeout) Tri‑Tek Electronics – Authorized DistributorTri‑Tek Electronics (with a retail presence in Mesa, AZ) proudly offers the CORD‑1‑9 under Closeout Special terms. We provide full manufacturer warranty coverage, swift support, and local fulfillment for installers and technicians in Phoenix, Mesa, Chandler, Tempe, Gilbert, and Scottsdale.Due to the closeout status, inventory is extremely limited, and pricing and availability reflect stock on hand only. Product Overview The CORD‑1‑9 is a molded AC power lead designed for general-purpose power delivery in IT, networking, AV, and related equipment environments. This 9-foot cable features: Input end: NEMA 5‑15P (U.S. 3‑prong plug) Output end: IEC 60320 C13 female connector Length: 9 ft (≈ 2.74 m) Conductor: 3 × 18 AWG copper Rated capacity: Suitable for loads up to roughly 10 A at 125 V (verify with your device specifications) Molded strain‑relieved ends to reduce stress at terminations PVC insulation / jacket, flame‑rated to industry norms Durable flexibility suited to rack, shelf, or endpoint power routing Features & Benefits Extended reach: 9 ft offers flexibility in placing equipment farther from wall receptacles Standard connectivity: Works with most computers, network switches, UPS units, monitors, and servers Molded, strain‑relieved ends: Enhances mechanical durability, especially in frequent‑use or replug environments Closeout pricing: Exceptional value while supplies last Local fulfillment: In‑stock at Tri‑Tek’s Mesa, AZ warehouse for fast delivery and support throughout Phoenix metro Installation Scenario Example Suppose you are deploying a small rack in a conference room where the PDU or outlet is some distance away—say 8 ft away. The 9 ft length of the CORD‑1‑9 gives you slack to route neatly along cable troughs and rack edges without tight bends. Because Tri‑Tek holds this in Mesa, AZ, you or your crew can pick up spares or replacements rapidly for jobs around Phoenix. Important Notes & Best Practices Confirm the connected equipment’s current draw remains below ~10 A for safe operation on 18 AWG. Avoid bundling this cord tightly with other high-current or heat‑generating cables to prevent overheating. Inspect periodically (especially at ends) for nicks, cuts, or insulation damage, and replace immediately if compromised. Because it is a closeout item, quantities are strictly limited — once it sells out, it may not be restocked at this price.

Read more less

Tri‑Tek CORD‑1‑5 — 5 ft 18 AWG 5‑15P → IEC C13 Power Cord (Closeout) Tri‑Tek Electronics – Authorized DistributorTri‑Tek Electronics (Mesa, AZ) is pleased to offer the CORD‑1‑5 power cord under Closeout Special terms. As an authorized distributor, we provide full manufacturer warranty coverage, local support, and fast shipping to Phoenix, Mesa, Chandler, Tempe, Gilbert, Scottsdale and surrounding Arizona regions. Because this item is a closeout, quantities are very limited — availability is strictly while stock lasts. Product Overview The CORD‑1‑5 is a molded AC power cable that connects standard U.S. mains to devices with IEC C13 inlets. It features: Input: NEMA 5‑15P (3‑prong U.S. plug) Output: IEC 60320 C13 (female) Length: 5 ft (≈ 1.52 m) Conductors: 3 × 18 AWG copper Typical Rating: Up to ~10 A / 125 V (verify with equipment specs) Molded strain reliefs on both ends PVC jacket / insulation, flame‑rated to standard industry levels Reliable flexibility and mechanical durability This 5 ft length is commonly used for computer workstations, desktop power connections, small network devices, and any scenario where moderate reach is sufficient without excessive slack. Features & Benefits Compact, efficient length: Ideal for connecting equipment in close proximity to outlets while avoiding cable excess Standard compatibility: Works with PCs, servers, networking gear, UPS units, and many electronic devices Strain relief molded ends: Reduces stress at connector interfaces, improving lifespan Closeout bargain: Excellent value pricing for end‑of‑line stock Local fulfillment: In stock at Tri‑Tek’s Mesa, AZ facility for rapid dispatch and support in Phoenix area Example Installation Scenario For an office computer desk setup where the wall outlet is about 4 ft behind the PC, the 5 ft CORD‑1‑5 is just enough to reach cleanly without looping excessive cable behind furniture. The molded connectors make insertion and removal simple, and the compact length keeps cable runs tidy in confined spaces. Because Tri‑Tek maintains local inventory in Mesa, installers around Phoenix can pick up spares or replacements quickly for jobs in the field. Usage & Safety Notes Always verify that your device’s current draw remains under the allowable limit for 18 AWG (commonly ~10 A at 125 V) Avoid tight bundling, proximity to heat sources, or sharp bends that might degrade insulation Inspect the cord periodically, particularly at the ends, for nicks, abrasion, or damage; replace if any compromise is detected Because this is a closeout item, once stock is depleted it may no longer be available at this price

Read more less

Hosa PWA‑486 — Right‑Angle Power Adapter (NEMA 5‑15R → NEMA 5‑15P) Product Overview The Hosa PWA‑486 is a compact, right‑angle AC power adapter that converts a female NEMA 5‑15R receptacle to a male NEMA 5‑15P plug. It reorients a standard grounded three-prong plug by 90 degrees, allowing for more efficient use of space in tight or shallow installation areas such as behind furniture, AV racks, and wall-mounted equipment. This adapter supports full three-wire electrical connectivity—hot, neutral, and ground—ensuring safe and reliable power transmission. Its durable design makes it suitable for both residential and professional AV, IT, and low-voltage environments. Key Features & Specifications Parameter Description Input / Receptacle NEMA 5‑15R (female, grounded) Output / Plug NEMA 5‑15P (male, grounded) Orientation 90° right-angle Electrical Support 3-wire (grounded) configuration Use Environment Tight clearance spaces, equipment racks, wall outlets Build Rigid molded body for durability and contact security Use Cases & Best Practices Flush Wall or Tight Outlet SpacesIdeal when a standard power cord cannot fit due to limited clearance between the plug and the wall. The 90° design allows the cord to exit parallel to the wall, saving space and reducing strain. AV & IT Rack SystemsCommonly used behind equipment racks where power strips or devices must fit close to mounting surfaces. Helps maintain clean cable paths and prevents plug interference. Improved Cable ManagementHelps direct power cords downward or sideways immediately after exiting the receptacle, reducing stress on plugs and improving wire dressing in confined setups. Safe Grounded ConnectionsMaintains a full ground path, making it suitable for electronics and other devices that require grounded connections for safety and performance. Example Installation Scenario An AV integrator is setting up a media control hub inside a wall-mounted enclosure. The standard three-prong plug on the power conditioner would not clear the back of the enclosure without bending. The Hosa PWA‑486 adapter allows the plug to exit at a right angle, resolving the clearance issue and maintaining safe, reliable power delivery. In another case, a technician working in a shallow IT rack installs this adapter to allow a PDU's power cable to sit flush against the rear panel, reducing cable bend radius and improving long-term cable life. Tri‑Tek Electronics is an authorized distributor of Hosa products. We offer full manufacturer warranty, factory support, and competitive pricing. Customers in Mesa, Phoenix, Chandler, Tempe, Gilbert, Scottsdale, Glendale, and surrounding Arizona areas can take advantage of our local retail store and expert support staff.

Read more less