Description
TeknoCrafters FA5001 Arduino UNO R3 Starter Kit
The TeknoCrafters FA5001 Arduino UNO R3 Starter Kit is a comprehensive kit designed for beginners and hobbyists. Featuring an Arduino UNO R3 DIP board and a wide variety of components, this kit is ideal for exploring electronics and programming. Whether you're building basic circuits or developing complex projects, this kit provides all the tools you need.
Tri-Tek Electronics, an authorized distributor, offers full factory warranty coverage and expert support at our Mesa, AZ, retail location.
Download Arduino Integrated Development Environment (IDE)
Download Project Book for TEKFA5001 Arduino Starter Kit here.
Components Included
Download a list of all included components (.pdf)
| # |
Quantity |
Component Description |
| 1 |
1 |
5V 1 Channel Relay Module |
| 2 |
30 |
Resistors (220Ω, 10KΩ, 1KΩ) |
| 3 |
1 |
MFRC-522 RC522 RFID + S50 Card + Keychain |
| 4 |
1 |
PS2 Game Joystick Module |
| 5 |
1 |
SG90 Servo Motor (9g, 180°) |
| 6 |
1 |
Arduino UNO R3 DIP Board |
| 7 |
1 |
65pcs Flexible Breadboard Jumper Wires |
| 8 |
1 |
ULN2003 Driver Board Stepper Motor (Green) |
| 9 |
1 |
5V 4-Phase Stepper Motor |
| 10 |
1 |
DHT11 Temperature and Humidity Sensor |
| 11 |
1 |
IIC/I2C Serial Interface Adapter Module |
| 12 |
1 |
Arduino Microphone Sound Sensor Module |
| 13 |
1 |
IR Remote Control (no battery included) |
| 14 |
10 |
1-Pin Male to Female Dupont Lines (20cm) |
| 15 |
5 |
5mm Yellow LEDs |
| 16 |
5 |
5mm Green LEDs |
| 17 |
5 |
5mm Red LEDs |
| 18 |
3 |
Light Sensors (Photoresistors, LDR 5516) |
| 19 |
1 |
74HC595 8-Bit Shift Register |
| 20 |
1 |
5V Passive Buzzer |
| 21 |
1 |
5V Active Buzzer |
| 22 |
1 |
8x8 Red 64 LED Dot Matrix Display |
| 23 |
1 |
1838B IR Receiving Head |
| 24 |
1 |
UNO R3 USB Cable (0.5m) |
| 25 |
1 |
LM35 Temperature Sensor |
| 26 |
1 |
0.56-inch 1-Digit 7-Segment LED Display |
| 27 |
1 |
0.56-inch 4-Digit 7-Segment LED Display |
| 28 |
5 |
Tactile Push Button Switches (12x12x7.3mm) |
| 29 |
2 |
SW-520D Ball Switches |
| 30 |
1 |
5mm 940nm Infrared Receiver LED |
| 31 |
5 |
Tactile Push Buttons with Yellow Caps |
| 32 |
1 |
10K Potentiometer (15mm Shaft) |
| 33 |
1 |
DS1302 Real-Time Clock Module |
| 34 |
1 |
DIP 3-Color LED Module |
| 35 |
1 |
Rain Water Level Detection Sensor |
| 36 |
1 |
9V Battery Connector (10cm) |
| 37 |
1 |
LCD1602 Display with Blue Backlight |
| 38 |
1 |
4x4 Matrix Keypad |
| 39 |
1 |
830-Point Solderless Breadboard |
| 40 |
1 |
High-Quality Retail Box |
| 41 |
1 |
Components Introduction Paper |
| 42 |
1 |
Yellow Kraft Paper Bubble Bag |
Benefits of the FA5001 Starter Kit
-
All-in-One Solution: Perfect for building projects such as robotics, sensors, and IoT applications.
-
Learning Made Simple: Includes essential components for experimenting with electronics and programming.
-
Wide Application: Ideal for students, makers, and professionals looking to explore the Arduino platform.
Example Project: Smart Weather Monitoring System
Use the DHT11 sensor, LCD1602 display, and real-time clock module to build a weather monitoring system. Display temperature, humidity, and time on the LCD, creating an engaging learning project.
