Products

Vigitron Vi1053VPD 12VDC Video, Data & Power Combiner Tri-Tek Electronics offers factory-backed warranty coverage, competitive pricing, and local support at our Mesa, AZ retail location. Product Overview The Vigitron Vi1053VPD is a compact, passive device designed to transmit a single channel of analog video, RS-422/RS-485 data, and 12VDC camera power over one Cat-5 cable. It supports distances up to 750 feet (228 meters) with passive transceivers and, when paired with multi-channel combiner hubs and active UTP receivers, can support long-range runs up to 3,000 feet (915 meters). The unit connects via RJ-45 and includes breakout cables for video (BNC coax), data, and power, ensuring a clean structured wiring setup. Integrated surge protection safeguards video equipment against voltage spikes, while its high 60 dB noise immunity guarantees signal quality. Download Vigitron Vi1053VPD User Manual (.pdf) Key Features Carries video, data, and power over a single RJ-45 4-pair cable Supports NTSC, PAL, and SECAM video formats Built-in passive transceiver and surge protection Enables "up-the-coax" PTZ signaling 60 dB crosstalk and noise immunity Compact size for easy camera-mounted installation Ideal for structured cabling environments Covered by a limited lifetime warranty Installation & Applications Install the Vi1053VPD at each camera location using pre-run Cat-5 cabling. Connect the RJ-45 input, then attach breakout leads to the camera’s video, data, and power interfaces. For short runs, pair with Vi12xxVPD or Vi15xxVPD series receivers; for extended distances, combine it with Vi13xxVPD or Vi14xxVPD hubs and active UTP receivers for centralized control and long-distance reach. Example Use Case: In an industrial facility, installers can use existing cabling to supply power, data control, and video signal to PTZ cameras without running separate conduits, significantly streamlining deployment and reducing material cost. Specifications Maximum range: 750 feet (228 meters); up to 3,000 feet (915 meters) with active receivers Frequency range: DC to 10 MHz UTP impedance: 100 ohms ±20%, 24 AWG minimum Input voltage: 16–30 VAC/DC (Class II SELV) Output: 12VDC, regulated, ≤30 mV ripple, 600 mA max Connectors: RJ-45, BNC video, 9-inch power and data pigtails Surge protection: ANSI/IEEE C62.41 compliant Operating environment: –10°C to +50°C, 0–95% humidity (non-condensing) Housing: Grey flame-retardant ABS, 1.5 × 1.25 × 0.8 inches, 25 grams Warranty & Availability This is a Closeout Special — limited stock and pricing available. The Vi1053VPD is backed by Vigitron’s limited lifetime warranty. Secure yours today at Tri-Tek Electronics in Mesa, AZ, and benefit from knowledgeable local support and technical service.

Read more less

🔦 Sunray Lighting 386 - Closeout Special! 🔦 Illuminate your projects with the Sunray Lighting 386 14 Volt .08 Amp T-1 3/4 Lamp, now available at a limited-time discounted price. This reliable lamp is perfect for electronics technicians, IT professionals, and low voltage installers seeking quality and performance. ⚙️ Product Specifications: - Voltage: 14 Volt - Current: 0.08 Amp - Size: T-1 3/4 🔧 Key Features: - Reliable and durable construction - Energy-efficient with low power consumption - Perfect for various applications requiring a 14V lamp 🌟 Authorized Distributor Benefits: By purchasing from Tri-Tek Electronics, an authorized distributor of Sunray Lighting products, you can trust that you are receiving genuine products with full manufacturer support and warranty. Don't miss out on this exclusive closeout special! Order now to secure your stock and brighten up your projects with Sunray Lighting quality and value.

Read more less

Introducing the Sunray Lighting 7646 14V 0.08A T1 – 1/4 Incandescent Bi-Pin Base Lamp, a versatile lighting solution perfect for your technical projects! 🌟 **Product Specifications:** - Voltage: 14V - Current: 0.08A - Type: T1 – 1/4 Incandescent - Base: Bi-Pin **Key Features:** - Reliable and durable design - Perfect for low voltage installations - Ideal for electronics technicians and IT professionals - Limited stock available due to closeout special **Why Choose Tri-Tek Electronics?** - Authorized distributor of Sunray Lighting - Guarantee of genuine products - Exclusive access to manufacturer benefits Don't miss out on this fantastic deal! Upgrade your lighting setup with the Sunray Lighting 7646 today. 🛠️🔌

Read more less

Introducing the Sunray Lighting 1487, 14V 200MA T-13/4 Lamp - a must-have for electronics technicians, IT professionals, and low voltage installers! 🌟 Product Features: - Voltage: 14V - Current: 200MA - Type: T-13/4 Lamp Why Choose Sunray Lighting 1487? - High performance and reliability - Perfect for various electronic applications - Limited stock available due to closeout special Tri-Tek Electronics - Your Trusted Distributor: - Proudly an authorised distributor of Sunray Lighting - Benefit from genuine products and exceptional customer service Don't miss out on this exceptional product - order now while stocks last! 🛒✨

Read more less

Illuminate your projects with the Sunray Lighting 1815 14V 200MA T-31/4 Lamp – a closeout special offering incredible value and performance. 🌟 🔹 Product Specifications: - Brand: Sunray Lighting - Model: 1815 - Voltage: 14V - Current: 200MA - Type: T-31/4 Lamp 🔹 Key Features: - Reliable and efficient lighting solution - Perfect for electronics technicians, IT professionals, and low voltage installers - Limited stock available at a special closeout price - Distributed by Tri-Tek Electronics, ensuring quality and authenticity 🔹 Benefits of Shopping with Tri-Tek Electronics: - Authorised distributor of Sunray Lighting products - Access to genuine products with manufacturer warranty - Expertise and support from a trusted distributor Upgrade your lighting setup with the Sunray Lighting 1815 14V 200MA T-31/4 Lamp. Order now to secure yours before they're gone! ⚡

Read more less

Introducing the Sunray Lighting 373, 14V 80MA T-13/4 Lamp, a reliable and efficient lighting solution for your electronic needs. 🌟 🔹 Product Specifications: - Voltage: 14V - Current: 80MA - Type: T-13/4 - Brand: Sunray Lighting - Limited Stock: Closeout Special 🔹 Benefits for Installers: - High performance for electronics technicians and IT professionals - Value for low voltage installers - Guaranteed quality as an authorised distributor of Sunray Lighting by Tri-Tek Electronics Don't miss out on this limited-time offer! Illuminate your projects with the Sunray Lighting 373 Lamp today.

Read more less

Introducing the Sunray Lighting 76-382 Closeout Special! 💡 Illuminate your projects with the precision and reliability of the Sunray Lighting 76-382. Designed for electronics technicians, IT professionals, and low voltage installers, this product offers exceptional value and performance. Here's why you need to add this to your toolkit: 🔹 Specifications: - Voltage: 14V - Current: 80MA - Base Type: T-13/4 Midget Flange - Brightness: 0.3MSCP - Lifespan: 15000 Hrs 🔹 Benefits: - Reliable performance for up to 15000 hours - Perfect for low voltage installations - Compact T-13/4 Midget Flange design 🔹 Tri-Tek Electronics - An Authorised Distributor: As an authorised distributor of Sunray Lighting, Tri-Tek Electronics ensures you receive genuine products with unmatched quality and support. Purchase with confidence knowing you're getting the best in the industry. Hurry! This closeout special is available for a limited time only, with prices and availability tied to our current stock. Don't miss out on this opportunity to enhance your projects with the Sunray Lighting 76-382.

Read more less

PI Manufacturing 14‑Port +1 Dolby 7.1 Double‑Gang Decora Wall Plate — Closeout Special Overview This high‑capacity wall plate from PI Manufacturing provides a clean, concealed termination for 7.1 audio systems. It features 14 brass binding posts (7 pairs, red/black) for the seven full range channels, plus a single RCA feed‑through for the subwoofer. The unit is configured in a double‑gang Decora form factor, making it ideal for professional AV installations or home theater prewire. Because this is a closeout item, stock and pricing are limited to on‑hand inventory only. As an authorized distributor, Tri‑Tek Electronics offers this product with full manufacturer warranty coverage and factory support. We ensure the best pricing and availability for installers, AV integrators, and tech enthusiasts in the Phoenix / Mesa AZ region. Key Features Decora‑style, double‑gang faceplate (white) 7 pairs of brass binding posts (color coded: red + black) Binding posts accept bare wire, banana plugs, or spade lugs 1 RCA feed-thru connector (for subwoofer or LFE) Clearly labeled channel designations (e.g. FL, FR, C, RL, RR, SL, SR) Low‑voltage installation — mounts into standard double gang electrical / low voltage box Decora screw mounting (included) Durable construction suitable for long-term installations Closeout item — limited quantity, while supplies last Typical Use / Installation Example A common use case is in home theater prewire projects. During the rough‑in phase, you run speaker cable (12–16 AWG) from the AV rack location out to each speaker position. At the theater room, you mount a double gang low-voltage bracket in the wall and install this PI wall plate. You terminate each speaker cable to the back side of the brass binding posts. At the front (clean) side, your AV receiver or amplifier connects via banana plugs or spade lugs. The RCA feed‑through is used for the subwoofer’s LFE out. This arrangement neatly hides all wiring behind the wall and provides clear, labeled connection for future equipment changes. Because of the Decora design, the plate blends with standard wall décor and fits within standard trim kits. Specification Table Parameter Specification Channels 7 (full‑range) binding post pairs + 1 RCA (sub) Binding Post Material Brass Connection types supported Bare wire, banana plug, spade lug Faceplate Style Decora, double‑gang Color White Mounting Standard double-gang low-voltage / electrical box Labeling Clearly printed channel designators Warranty Full manufacturer warranty (via Tri‑Tek Electronics) Special Note Closeout item — limited stock Important Notes & Recommendations Closeout item: Quantities are limited and pricing is final. When inventory is depleted, the product will not be restocked. Use a double gang low-voltage bracket or box for installation to allow room behind the plate for banana plugs and wiring bend radius. Label each cable during termination to avoid channel confusion (Front Left, Center, etc.). When using banana plugs on both sides, ensure clearance behind the plate is sufficient to accommodate plug length. Maintain consistent polarity (red = positive, black = negative) to avoid phase issues. This plate is designed strictly for low-voltage audio; do not use for mains or power wiring. Why Choose PI Manufacturing via Tri‑Tek Electronics? Authorized distribution: We guarantee full manufacturer warranty and support. Local support in Mesa / Phoenix AZ: Faster logistics, local advice, and stocking closer to installation sites. Closeout pricing: Even though stock is limited, you benefit from discounted pricing for surplus inventory.

Read more less

HellermannTyton T50L0C2 15" Black Cable Tie, UL Rated, 50lb Tensile Strength, PA66 - Pack of 100 The HellermannTyton T50L0C2 Black Cable Tie is designed to provide a robust and efficient solution for organizing and securing cables. Measuring 15 inches in length and boasting a tensile strength of 50 pounds, these black cable ties are made from high-quality PA66 material, ensuring exceptional durability and reliability. UL rated for safety, these ties are suitable for a wide range of applications, including residential, commercial, and industrial environments. Tri-Tek Electronics, an authorized distributor of HellermannTyton products, guarantees full manufacturer warranty coverage, competitive pricing, and comprehensive factory support. Features and Specifications Product Type: Cable Tie Manufacturer: HellermannTyton Part Number: T50L0C2 Length: 15 inches Tensile Strength: 50 pounds Color: Black Material: PA66 (Polyamide 66) Rating: UL Rated Quantity: Pack of 100 pieces Key Benefits High Tensile Strength: With a tensile strength of 50 pounds, these ties securely hold large bundles of cables. Long Length: The 15-inch length provides ample reach for bundling multiple cables and larger diameter bundles. Easy Installation: Quick and straightforward to use, ensuring efficient cable management. Versatile Use: Suitable for organizing and securing cables in various settings, including residential, office, and industrial applications. Durable Construction: Made from high-quality PA66 material, these cable ties are built to last, ensuring long-term performance. UL Rated: Meets UL standards, providing additional assurance of quality and safety. Installation Example In a commercial setting, the HellermannTyton T50L0C2 Black Cable Ties can be used to manage and secure cables running along network racks and enclosures. The 15-inch length allows for the bundling of large diameter cables, while the high tensile strength ensures the cables remain securely fastened, maintaining an organized and professional appearance. Why Choose HellermannTyton T50L0C2? Quality Assurance: As an authorized distributor, Tri-Tek Electronics offers genuine HellermannTyton products with a full manufacturer warranty. Safety Compliance: The UL rating ensures the highest safety standards for various applications. Durability: Made from high-quality PA66 material, these cable ties are designed for long-term reliability and performance. Technical Specifications Table Specification Details Length 15 inches Tensile Strength 50 pounds Color Black Material PA66 (Polyamide 66) Rating UL Rated Quantity 100 pieces per pack

Read more less

🔌 **15' USB 2.0 A Male to Micro B Male Cable** Unleash the power of connectivity with our 15' USB 2.0 A Male to Micro B Male Cable in sleek black. Perfect for electronics technicians, IT professionals, and low voltage installers, this cable is a must-have for seamless data transfer and device syncing. **Product Features:** - Length: 15 feet for flexible connectivity options - Type: USB 2.0 A Male to Micro B Male - Colour: Classic Black - Superior performance for high-speed data transfer - Durable construction for long-lasting use - Closeout special - Limited price and availability **Why Choose Tri-Tek Electronics?** As an authorised distributor of this premium cable manufacturer, Tri-Tek Electronics ensures you receive top-quality products with unmatched performance and reliability. Benefit from our partnership and elevate your connectivity experience today! Upgrade your setup with the 15' USB 2.0 A Male to Micro B Male Cable - order now while stocks last! 🚀

Read more less

Introducing the Bussmann BUSAGC-15/100AP Fast Blow Fuses (5 pk) - a must-have for electronics technicians, IT professionals, and low voltage installers. 🔌 Product Features: - Amperage: 15/100A - Voltage: 250V - Type: AGC Fast Blow - Size: 1/4 x 1-1/4 (6.3mm x 32mm) - Construction: Glass tube with nickel-plated brass endcap - Certification: UL Listed, meets standard 248-14 Why Choose Tri-Tek Electronics? - Authorized distributor of Bussmann products - Guaranteed quality and authenticity - Limited stock available due to closeout special Don't miss out on this high-performance fuse pack - order now while supplies last! ⚡

Read more less

Introducing the NTE Electronics NTEVHT1500M16 Electrolytic Capacitor, a Closeout Special! 🔹 **Product Overview:** - **Manufacturer:** NTE Electronics - **Manufacturer Part Number:** NTEVHT1500M16 - **Capacitance:** 1500uF - **Voltage Rating:** 16V - **Type:** Electrolytic Capacitor - **Applications:** Automotive, Commercial, Industrial - **Special Feature:** High Temperature Operation 🔹 **Key Features:** - High Temperature Operation for reliability in demanding environments. - Extended Lifespan to reduce replacements. - Versatile usage in automotive, commercial, and industrial settings. 🔹 **Product Description:** Upgrade your electronic projects with the NTE Electronics NTEVHT1500M16 Electrolytic Capacitor, designed to meet the needs of electronics technicians, IT professionals, and low voltage installers. This capacitor offers exceptional performance and reliability, with a capacitance of 1500uF and a voltage rating of 16V, making it perfect for applications requiring extended life and higher temperature operation. 🔹 **Benefits of Tri-Tek Electronics as an Authorized Distributor:** As an authorized distributor of NTE Electronics, Tri-Tek Electronics guarantees the authenticity and quality of the NTEVHT1500M16 capacitor. By purchasing from us, you are assured of genuine products and excellent customer service. Hurry, this Closeout Special is limited to stock on hand at the time of order. Don't miss out on this opportunity to enhance your projects with a high-quality capacitor from a trusted brand!

Read more less